Is GPC only qualitative but not quantitative?

Is GPC only qualitative but not quantitative?, Total:247 items.

The international standard classification for "Is GPC only qualitative but not quantitative?" includes: Flow in closed conduits , Measurement of fluid flow , Bolts, screws, studs , Refractories , Measurement of electrical and magnetic quantities , Aerospace electric equipment and systems , Laboratory medicine , Steels for pressure purposes , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Is GPC only qualitative but not quantitative?" includes: Flow capacity and material level instrument , Fastener , Fireproof material in general , Crime judging technology , Sensor elements , Sanitation in general , Metal physical property test method , Tobacco curing in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9248-1988 Methods of evaluating the performance of flowmeters for incompressidle fluids
GB/T 43911-2024 Evaluation method for uncertainty of boiler thermal performance test
GB/T 3098.16-2014 Mechanical properties of fasteners―Stainless steel set screws
GB/T 9248-2008 Methods of evaluating the performance of flowmeters for incompressible fluids
GB/T 3098.16-2000 Mechanical properties of fasteners-Set screws made of stainless-steel

Group Standards of the People's Republic of China

T/SSM 15-2024 Uncertainty Evaluation of Measurement Result of Heat Meter
T/FJEMIA 7-2022 Determination of morphine, codeine, papaverine, narcotine and thebaine in functional drinks

工业和信息化部/国防科技工业局

WJ/T 9084-2015 Determination of non-conductive properties of detonating tubes

未注明发布机构

DIN EN ISO 9169 E:2004-06 Air quality definition and determination of performance characteristics of automated measurement systems (draft)
DIN EN 15603 E:2013-05 Energy performance of buildings - Overall energy use and definition of energy ratings
DIN EN 1402-6:2004 Unshaped refractory products – Part 6: Determination of physical properties; German version EN 1402-6:2003

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 4513.8-2017 Monolithic(unshaped)refractory products-Part 8:Determination of complementary properties
GB/T 4513.6-2017 Monolithic(unshaped) refractory products―Part 6:Measurement of physical properties

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39853.2-2021 Power quality measurement in power supply systems—Part 2: Functional tests and uncertainty requirements

Professional Standard - Public Safety Standards

GA/T 104-1995 Methods of qualitative analysis for morphine codeine thebaine papaverine narcotine and quantitative for morphine codeine of opium

Professional Standard - Aerospace

QJ 28A-1998 Calculation Methods of Static Performance Uncertainty of Pressure Sensor

国家卫生计生委

WS/T 505-2017 Guideline for evaluation of qualitative test performance

Professional Standard - Non-ferrous Metal

YS/T 617.4-2007 Determination of chemical compositions and physical properties of aluminum powder magnesium powder and Al-Mg alloy powder Part 4 Determination of insoluble content in hydrochloric acid

National Metrological Technical Specifications of the People's Republic of China

JJF(烟草) 3.3-2008 Guidelines for the evaluation of measurement uncertainty of physical parameters of cigarette paper - Part 3: Tensile energy absorption
JJF(烟草)3.3-2008 Evaluation of Uncertainty in Measurement for Parameter of Physical Characteristics of Cigarette Paper—Part 3:Tensile Energy Absorption

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-16-1993 Jitter Transfer Function Measurement
ANSI N13.32-2008 Performance Testing of Extremity Dosimeters
ANSI N13.11-2009 Personnel Dosimetry Performance - Criteria for Testing

German Institute for Standardization

DIN EN ISO 1927-6:2013-04 Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012); German version EN ISO 1927-6:2012
DIN EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings; English version of DIN EN 15603:2008-07
DIN EN ISO 1927-8:2013-04 Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties (ISO 1927-8:2012); German version EN ISO 1927-8:2012
DIN EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); English version of DIN EN ISO 9169:2006-09
DIN CEN ISO/TS 16491:2013-04*DIN SPEC 8984:2013-04 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/TS 16491:2012); German version CEN ISO/TS 16491:2012
DIN 5036-4:1977 Radiometric and photometric properties of materials; classification
DIN EN ISO 9169:2006-09 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); German version EN ISO 9169:2006
DIN EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 62586-2:2013); German version EN 62586-2:2014
DIN EN ISO 15112:2023-03 Natural gas - Energy determination (ISO 15112:2018); German version EN ISO 15112:2018 / Note: This standard is part of the DVGW body of rules.
DIN EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998

SCC

BS PD ISO/TR 16494-2:2019 Heat recovery ventilators and energy recovery ventilators. Method of test for performance-Assessment of measurement uncertainty of performance parameters
AWWA WQTC62519 Can Stage 2 D/DBP Compliance Be Achieved without Chloramination?
BS DD ENV 1402-6:1998 Unshaped refractory products-Measurement of physical properties
AWWA ACE93015 Is Water Affordability a Pricing Priority?
BS DD ENV 1402-8:1999 Unshaped refractory products-Determination of complementary properties
DANSK DS/EN ISO 1927-6:2013 Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties
UNE-EN 1402-6:2004 Unshaped refractory products - Part 6: Measurement of physical properties
NS-EN 1402-6:2003 Unshaped refractory products — Part 6: Measurement of physical properties
DANSK DS/EN 62586-2/A1:2017 Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements
DANSK DS/EN 62586-2/AC:2018 Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements
BS EN 62586-2:2017 Power quality measurement in power supply systems-Functional tests and uncertainty requirements
DANSK DS/EN ISO 1927-8:2013 Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties
UNE-EN 1402-8:2004 Unshaped refractory products - Part 8: Determination of complementary properties
NS-EN 1402-8:2003 Unshaped refractory products — Part 8: Determination of complementary properties
DIN EN 62586-2:2018 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 62586-2:2017); German version EN 62586-2:2017
NS-EN ISO 1927-6:2012 Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties (ISO 1927-6:2012)
12/30256017 DC BS EN 62586-2. Power quality measurement in power supply systems. Functional tests and uncertainty requirements
08/30195075 DC BS EN ISO 1927-6. Unshaped refractory materials. Part 6. Measurement of physical properties
DIN EN 62586-2 E:2016 Draft Document - Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 85/516/CD:2015)
DANSK DS/IEC TR 63250:2021 Household and similar electrical appliances – Method for measuring performance – Assessment of repeatability, reproducibility and uncertainty
CEI EN 62586-2:2018 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements
CEI EN 62586-2/A1:2018 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements
DANSK DS/EN 62586-2:2017 Power quality measurement in power supply systems — Part 2: Functional tests and uncertainty requirements
AENOR UNE-EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating — Part 1: Irradiance and temperature performance measurements and power rating
CEI EN 61853-1:2013 Photovoltaic (PV) module performance testing and energy rating Part 1: Irradiance and temperature performance measurements and power rating
DANSK DS/EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
DANSK DS/EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
BS PD IEC TR 63250:2021 Household and similar electrical appliances. Method of measuring performance. Assessment of repeatability, reproducibility and uncertainty
NS-EN ISO 1927-8:2012 Monolithic (unshaped) refractory products — Part 8: Determination of complementary properties (ISO 1927-8:2012)
BS PD ISO/TR 12134:2010 Rubber. Estimation of uncertainty for test methods. Non-functional parameters
VDI 3951-2013 Overview of essential regulations for carrying out emission measurements
DIN EN ISO 1927-6 E:2008 Draft Document - Unshaped refractory products - Part 6: Measurements of physical properties (ISO/DIS 1927-6:2008); German version prEN ISO 1927-6:2008
VDI 4219-2009 Determination of the uncertainty of emission measurements using discontinuous measurement methods
08/30195084 DC BS EN ISO 1927-8. Unshaped refractory materials. Part 8. Determination of complementary properties
BS 4432-3:1969 Methods for the determining optical properties of pulp paper and board. Measurement of the ISO opacity (paper backing) of paper
09/30204713 DC BS EN 61853-1. Photovoltaic (PV) module performance testing and energy rating. Part 1. Irradiance and temperature performance measurements and power rating
BS 4889:1973 Method for specifying the performance of electronic measuring equipment
UNE 77237:1999 AIR QUALITY. DETERMINATION OF PERFORMANCE CHARACTERISTICS OF MEASUREMEnt methods.
BS EN 1367-1:2000 Tests for thermal and weathering properties of aggregates-Determination of resistance to freezing and thawing
AENOR UNE-EN 62670-3:2018 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
CEI EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing Part 3: Performance measurements and power rating
DIN EN ISO 1927-8 E:2008 Draft Document - Unshaped refractory products - Part 8: Determination of complementary properties (ISO/DIS 1927-8:2008); German version prEN ISO 1927-8:2008
DANSK DS/EN 62670-3:2017 Photovoltaic concentrators (CPV) – Performance testing – Part 3: Performance measurements and power rating

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LO-09-064-2009 Experimental Measurement and Uncertainty Analysis on the Energy Performance of a Chilled Water Cooling Coil
ASHRAE SE-99-16-2-1999 Engineering Uncertainty Analysis in the Evaluation of Evaluating the Uncertainty in Cool Storage Inventory Using an Energy Balance Method
ASHRAE 4375-2000 "Uncertainty of ""Measured"" Energy Savings from Statistical Baseline Models (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 6@ Number 1@ January 2000@ pp.
ASHRAE SE-99-02-02-1999 Impact of Forecasting Uncertainty on the Performance of a Predictive Optimal Controller for Thermal Energy Storage Systems
ASHRAE SE-99-16-1999 Symposium on Use of Uncertainty Analysis in Design and Performance Evaluations
ASHRAE 4243-1999 Determining the Performance of Energy Wheels: Part 1- Experimental and Numerical Methods

Association Francaise de Normalisation

NF EN 62586-2:2017 Power quality measurement in power networks Part 2: functional testing and uncertainty requirements
NF P50-779:2008 Energy performance of buildings - Overall energy use and definition of energy ratings.
NF C42-586-2/A1*NF EN 62586-2/A1:2021 Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements
NF C42-586-2*NF EN 62586-2:2017 Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements
NF C42-586-2:2014 Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements
NF EN 62586-2/A1:2021 Power quality measurement in power networks - Part 2: functional testing and uncertainty requirements
NF T51-516:1985 Plastics. Unsaturated polyester resins. Determination of properties.
NF EN ISO 1927-6:2013 Produits réfractaires monolithiques (non façonnés) - Partie 6 : détermination des propriétés physiques
NF B40-024:1999 Unshaped refractory products - Part 8:Determination of complementary properties
NF EN IEC 61853-3:2018 Performance tests and rated energy characteristics of photovoltaic (PV) modules - Part 3: rated energy characteristics of PV modules
XP E38-120*XP CEN ISO/TS 16491:2013 Guide to the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
NF X43-572*NF EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
XP ISO/TS 23471:2023 Experimental designs for uncertainty assessment - Using factorial designs to determine uncertainty functions
NF EN ISO 14956:2002 Air quality - Assessment of the suitability for use of a measurement procedure by comparison with a required measurement uncertainty
XP CEN ISO/TS 16491:2013 Guide for evaluating measurement uncertainty during cooling and heating capacity tests of air conditioners and heat pumps
NF EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
NF C57-370-3*NF EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: performance measurements and power rating
NF X20-516*NF EN ISO 15112:2018 Natural gas - Energy determination
NF EN ISO 15112:2018 Natural gas - Determination of energy
NF EN 62253:2011 Photovoltaic Pumping Systems – Design Qualification and Performance Measurements

British Standards Institution (BSI)

BS EN 62586-2:2014 Power quality measurement in power supply systems. Functional tests and uncertainty requirements
BS EN 62586-2:2017+A1:2021 Power quality measurement in power supply systems - Functional tests and uncertainty requirements
BS EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings
PD ISO/TR 16494-2:2019 Heat recovery ventilators and energy recovery ventilators. Method of test for performance. Assessment of measurement uncertainty of performance parameters
DD ENV 1402-8-1999 Unshaped refractory products. Determination of complementary properties
BS EN 1402-6:2003(2008) Unshaped refractory products — Part 6 : Measurement of physical properties
BS EN 1402-8:2003(2008) Unshaped refractory products — Part 8 : Determination of complementary properties
BS EN 12139:1999(2009) Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
19/30399710 DC BS EN 62586-2 AMD1. Power quality measurement in power supply systems. Part 2. Functional tests and uncertainty requirements
BS EN 62670-3:2017 Photovoltaic concentrators (CPV). Performance testing. Performance measurements and power rating
BS EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
PD IEC TR 63250:2021 Household and similar electrical appliances. Method of measuring performance. Assessment of repeatability, reproducibility and uncertainty
PD ISO/TR 12134:2010 Rubber. Estimation of uncertainty for test methods. Non-functional parameters
BS ISO 18315:2018 Nuclear energy. Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis
BS ISO 11631:1999 Measurement of fluid flow - Methods of specifying flowmeter performance
BS EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating. Irradiance and temperature performance measurements and power rating
BS ISO 11631:1998(1999) Measurement of fluid flow — Methods of specifying flowmeter performance
BS ISO 11631:1998 Measurement of fluid flow. Methods of specifying flowmeter performance
BS EN 61069-4:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment. Assessment of system performance
BS EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
BS EN ISO 25619-2:2008 Geosynthetics — Determination of compression behaviour Part 2: Determination of shortterm compression behaviour (ISO 25619-2:2008)
BS ISO 3506-7:2024 Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners - Flat washers with specified grades and property classes
BS ISO 15112:2007 Natural gas - Energy determination
BS EN ISO 15112:2018 Natural gas. Energy determination
BS EN ISO 25619-2:2009 Geosynthetics. Determination of compression behaviour. Determination of short-term compression behaviour
BS ISO 15112:2008 Natural gas. Energy determination

European Committee for Standardization (CEN)

EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings
DD ENV 1402-6-1998 Unshaped Refractory Products - Part 6: Measurement of Physical Properties Superseded by EN 1402-6: 2003
EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified)

ES-UNE

UNE-EN ISO 1927-6:2012 Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012) (Endorsed by AENOR in February of 2013.)
UNE-EN 62586-2:2017/AC:2018-09 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN 62586-2:2017/A1:2021 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 62586-2:2017 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN ISO 1927-8:2012 Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties (ISO 1927-8:2012) (Endorsed by AENOR in February of 2013.)
UNE-EN ISO 15112:2020 Natural gas - Energy determination (ISO 15112:2018)
UNE-EN 62670-3:2018 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating

European Committee for Electrotechnical Standardization（CENELEC）

EN 62586-2:2017 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Incorporating corrigendum November 2014)
EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
EN 62253:2011 Photovoltaic pumping systems - Design qualification and performance measurements

GSO

GSO ISO 1927-6:2016 Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties
OS GSO ISO 1927-6:2016 Monolithic (unshaped) refractory products -- Part 6: Measurement of physical properties
BH GSO ISO 16334:2017 Monolithic refractory products -- Determination of resistance to explosive spalling
OS GSO ISO 16334:2015 Monolithic refractory products -- Determination of resistance to explosive spalling
GSO ISO 1927-8:2016 Monolithic (unshaped) refractory products -- Part 8: Determination of complementary properties
OS GSO ISO 1927-8:2016 Monolithic (unshaped) refractory products -- Part 8: Determination of complementary properties
GSO ISO 11275:2013 Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method
GSO IEC 62586-2:2024 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
BH GSO IEC TR 63250:2023 Household and similar electrical appliances - Method for measuring performance - Assessment of repeatability, reproducibility and uncertainty
GSO IEC TR 63250:2023 Household and similar electrical appliances - Method for measuring performance - Assessment of repeatability, reproducibility and uncertainty
BH GSO ISO/TS 16491:2017 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
OS GSO ISO 9169:2008 Air quality — Definition and determination of performance characteristics of an automatic measuring system
GSO IEC 62670-3:2021 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
BH GSO IEC 62670-3:2022 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
OS GSO ISO 11631:2015 Measurement of fluid flow -- Methods of specifying flowmeter performance
GSO ISO 11631:2015 Measurement of fluid flow -- Methods of specifying flowmeter performance

Danish Standards Foundation

DS/EN 62586-2:2021 Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements
DS/IEC TR 63250:2021 Household and similar electrical appliances – Method for measuring performance – Assessment of repeatability, reproducibility and uncertainty
DS/CEN ISO/TS 16491:2013 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
DS/EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
DS/EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
DS/EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC

International Electrotechnical Commission (IEC)

IEC 62586-2:2017 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
IEC 62586-2:2021 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
IEC 62586-2:2013 Power Quality Measurement in Power Supply Systems - Part 2: Functional tests and uncertainty requirements
IEC TR 63250:2021 Household and similar electrical appliances - Method for measuring performance - Assessment of repeatability, reproducibility and uncertainty
IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules
IEC 62586-2:2017/COR1:2018 Corrigendum 1 - Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
IEC 62586-2:2017+AMD1:2021 CSV Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
IEC 62586-2:2017/AMD1:2021 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
IEC 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating

AENOR

UNE-EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
UNE-EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating

International Organization for Standardization (ISO)

ISO/TR 16494-2:2019 Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 2: Assessment of measurement uncertainty of performance parameters
ISO/TR 16344:2012 Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification
ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
ISO/IEC GUIDE 98-4:2012 Uncertainty of measurement.Part 4: Role of measurement uncertainty in conformity assessment
ISO 10329:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
ISO 18315:2018 Nuclear energy — Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis
ISO/IEC GUIDE 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 6444:2005 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
ISO/TR 12134:2010 Rubber - Estimation of uncertainty for test methods - Non-functional parameters
ISO 15112:2007 Natural gas - Energy determination
ISO 16494-1:2022 Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance

IEC - International Electrotechnical Commission

IEC 62586-2:2013/COR1:2014 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS – Part 2: Functional tests and uncertainty requirements (Edition 1.0)

VDI - Verein Deutscher Ingenieure

VDI 2048 Blatt 2-2001 Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples

KR-KS

KS C IEC 61853-3-2023 Photovoltaic (PV) module performance testing and energy rating — Part 3: Energy rating of PV modules
KS C IEC 61853-1-2013(2023) Photovoltaic Module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating
KS A ISO 18315-2019 Nuclear energy — Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis
KS I ISO 15112-2021 Natural gas — Energy determination

RO-ASRO

STAS 7184/18-1980 SOILS Determinat ion of potassium content accessible and hard accessible for plants
STAS 11190/2-1980 STABILIZED POWER SUPPLIES, FOR MEASURING Rating and performance

IN-BIS

IS 9176-1979 Methods for specifying functional performance of electronic measuring equipment

Korean Agency for Technology and Standards (KATS)

KS F 2829-2020 Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
KS C IEC 61853-1-2023 Photovoltaic Module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating
KS C IEC 61853-1-2013(2018) Photovoltaic Module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating
KS F 2829-2005(2020) Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
KS I ISO 9169:2009 Air quality-Definition and determination of performance characteristics of an automatic measuring system
KS I ISO 9169:2014 Air quality — Definition and determination of performance characteristics of an automatic measuring system
KS B ISO 11631-2014(2019) Measurement of fluid flow — Methods of specifying flowmeter performance
KS A ISO 18315:2019 Nuclear energy — Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis
KS I ISO 9169-2019 Air quality — Definition and determination of performance characteristics of an automatic measuring system
KS I ISO 9169-2014(2019) Air quality — Definition and determination of performance characteristics of an automatic measuring system
KS I ISO 15112:2021 Natural gas — Energy determination
KS B ISO 11631-2019 Measurement of fluid flow — Methods of specifying flowmeter performance
KS I ISO 15112-2015(2020) Natural gas－Energy determination

US-CFR-file

CFR 40-60.5365-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5365:Am I subject to this subpart?

American Society of Mechanical Engineers (ASME)

ASME PTC 6 REPORT-1985 Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines R(1997)
ASME B89.1.12M-1990 Methods for performance evaluation of coordinate measuring machines
ASME B89.7.6-2019 Guidelines for the Evaluation of Uncertainty of Test Values Associated with the Verification of Dimensional Measuring Instruments to Their Performance Specifications

CEN - European Committee for Standardization

CEN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
EN ISO 15112:2018 Natural gas - Energy determination

API - American Petroleum Institute

API PUBL 1149-1993 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (First Edition)
API TR 1149-2015 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (SECOND EDITION)

CENELEC - European Committee for Electrotechnical Standardization

EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating

Lithuanian Standards Office

LST EN ISO 1927-6:2013 Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012)
LST EN 12139-2002 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
LST EN 61853-1-2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011)

VN-TCVN

TCVN 6751-2009 Air quality.Definition and determination of performance characteristics of an automatic measuring system
TCVN 7541-2-2005 High efficiency lighting products.Part 2: Methods for determination of energy performance

IT-UNI

UNI 3816-1956 Cadmium. Qualities. Requirements.
UNI 3270-1952 Antimony. Qualities. Requirements.
UNI 3271-1952 Tin performance. Regulation
UNI 7439-1975 Determination of Heat Generating Capacity Performance of Gas Fuels with Water Flow Calorimeter
UNI 7549-P8-1976 Light aggregate. Stains Capacity Performance Measurement

NL-NEN

NEN 7104-1983 Pipes of amorphous thermoplastics materials - Determination of the creep behaviour of the pipes by flexion in the circumferential direction

RU-GOST R

GOST R 54014-2010 Functional food. Determination of soluble and unsoluble dietary fiber by enzymatic-gravimetric method
GOST 33969-2016 Energy effectiveness. Pumping system energy assessment

GOST

GOST R 58648.3-2021 Photovoltaic modules. Performance testing and energy rating. Part 3. Determination of energy rating

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0126-34-1-2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011); German version EN 61853-1:2011
VDE 0415-2-2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 62586-2:2013); German version EN 62586-2:2014
VDE 0415-2-2018 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 62586-2:2017); German version EN 62586-2:2017
VDE 0415-2-2016 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (IEC 85/516/CD:2015)

Standard Association of Australia （SAA）

AS 62040.3:2002 Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements
AS IEC 62040.3:2012 Uninterruptible Power Supply Systems (UPS) - Method for Specifying Performance and Test Requirements

GM North America

GM GM9121P-1995 Determining the Recoverable Energy of Flexible SMC Materials

ZA-SANS

SANS 100098-3:2009 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

AR-IRAM

IRAM 6587-1955 Specific gravimetric method for bitumen that cannot be processed separately

Indonesia Standards

SNI 07-3023-1992 Welding ability - Definition

ES-AENOR

UNE 53-510-1985 Determination of properties of elastomers

International Telecommunication Union (ITU)

ITU-T G.774.6-2001 Synchronous Digital Hierarchy (SDH) - Unidirectional Performance Monitoring for the Network Element View Series G: Transmission Systems and Media, Digital Systems and Networks Digital Terminal Equipments - Operations, Administration and Maintenance Featur

CZ-CSN

CSN 80 0867-1962 Determination of thickness and volumic propertiea of knitted fabrics
CSN 36 1321-1983 Non - instantaneous stationary water heaters. Methods for measuring the performance

Others: