Weighing substances on electronic balances

Weighing substances on electronic balances, Total:148 items.

The international standard classification for "Weighing substances on electronic balances" includes: Measurement of force, weight and pressure , Measurement of volume, mass, density, viscosity , Application of statistical methods , Natural gas , Films and sheets , Electronic components in general , IT applications in transport and trade , Electrical engineering in general .

The Chinese standard classification for "Weighing substances on electronic balances" includes: Basic laboratory equipment , Mechanics Measurement , Mathematics , Natural gas , Basic standards and general methods for synthetic resin and plastic , Electronic element in general , Commerce, Trade and Contract , Analysis methods for environmental quality of soils , Basic standards and general methods .

Professional Standard - Machinery

JB/T 11536.2-2013 Electronic weighing hopper — Part 2：Technical requirements
JB/T 5374-1991 Electronic Balance?
JB/T 7443-1994 Method of Designations of Electronic Balance Products

National Metrological Verification Regulations of the People's Republic of China

JJG 1036-2008/838 Verification Regulation for Electronic Balance
JJG 1036-2008 Verification Regulation for Electronic Balance
JJG 1036-2022 Electronic Balance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6378.4-2018 Sampling procedures for inspection by variables—Part 4:Procedures for assessment of declared quality levels for mean
GB/T 26497-2011 Electronic balance
GB/T 29249-2012 Electronic weighing moisture analyzer of oven drying
GB/T 6378.4-2008 Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels for mean
GB/T 26497-2022 Electronic balances
GB/T 22104-2008 Soil quality - Analysis of fluoride - Ion selective electrometry
GB/T 15543-2008 Power quality—Three-phase voltage
GB/T 20220-2006 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
GB/T 2828.4-2008 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
GB/T 27893-2011 Natural gas—Determination of particles content—Gravimetric method
GB/T 26572-2011 Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 16306-2008 Re-inspection and re-test procedures for assessment of declared quality levels
GB/T 31526-2015 Evaluation and classification of service quality for electronic commerce platform

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2039-2015 E-commerce platform comprehensive quality evaluation specification

Group Standards of the People's Republic of China

T/ZAS 3012-2021 Basic requirements for quality and safety monitoring of e-commerce platform products
T/ZEA 005-2021 Basic requirements for quality and safety monitoring of products traded on e-commerce platforms
T/ICMTIA ESG0022-2022 Preparation and weighing method of mixed gas in electronic industry
T/BGLM 0003.01-2018 Quality requirements for biogas entering natural gas pipelines
T/SYECA 0002-2017 E-commerce platform comprehensive quality evaluation specification
T/DGECA 001-2020 Specification for quality management of E-commerce platform

Military Standard of the People's Republic of China-General Armament Department

GJB 2823-1997 Evaluation method for average factory quality level of electronic component products

Tianjin Provincial Standard of the People's Republic of China

DB12/T 711-2016 E-commerce logistics service quality specification
DB12/T 1276-2023 E-government cloud platform service quality evaluation specifications

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 3351-2022 E-government cloud platform service quality evaluation specification

Liaoning Provincial Standard of the People's Republic of China

DB2101/T 0021.1-2020 E-Commerce Platform Part 1: Comprehensive Quality Evaluation

国家质量监督检验检疫总局

SN/T 4095.2-2017 Specification of intermediate check for electronic balance

Chongqing Provincial Standard of the People's Republic of China

DB50/T 644-2015 Quality Grading of Asparagus Seeds

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 2043-2017 Basic requirements for quality management of products traded on e-commerce platforms

未注明发布机构

DIN EN ISO 16014-5 E:2009-07 Plastics Determination of average molecular mass and molecular mass distribution of polymers using exclusion chromatography Part 5: Light scattering detection method (draft)
DIN EN ISO 16014-5 E:2018-04 Plastics Determination of average molecular mass and molecular mass distribution of polymers using exclusion chromatography Part 5: Light scattering detection method (draft)

Professional Standard - Electron

SJ/T 11363-2006 Requirements for concentration limits for certain hazardous substances in electronic information products

Gansu Provincial Standard of the People's Republic of China

DB62/T 1609-2007 Crop Seed Quality Radish
DB62/T 1614-2007 Crop Seed Quality Cucumber
DB62/T 1610-2007 Crop Seed Quality Onions
DB62/T 1612-2007 Crop Seed Quality Bean
DB62/T 1613-2007 Chrysanthemum chrysanthemum

KR-KS

KS I ISO 13686-2023 Natural gas — Quality designation
KS I ISO 15403-1-2023 Natural gas — Natural gas for use as a compressed fuel for vehicles — Part 1: Designation of the quality

CZ-CSN

CSN 50 3176-1960 Insulating board for electrical purposes (average quality)

RU-GOST R

GOST 29329-1992 Balance for static weighing. General technical requirements
GOST 27870-1988 Vibration. Evaluation of flexible rotor balancing quality
GOST R ISO 3951-4-2013 Statistical methods. Sampling procedures for inspection by variables. Part 4. Procedures for assessment of declared quality levels
GOST 27869-1988 High purity substances. Method for concentration of microimpurities by ion exchange

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4256-1999 Measurements of Volatile Organic Compound (VOC) Emissions from Wood Stains Using an Electronic Balance

GSO

OS GSO 269:1994 ELECTRONIC COMMERCIAL BALANCES
GSO ISO 673:2007 Soaps – Determination of Content of ethanol – insoluble matte
GSO ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
GSO ISO 18333:2021 Pallets for materials handling — Quality of new wooden components for flat pallets
BH GSO ISO 18333:2022 Pallets for materials handling — Quality of new wooden components for flat pallets
BH GSO ISO 659:2015 Oilseeds - determination of hexane extract (or light petroleum extract) called oil content.

British Standards Institution (BSI)

BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS 6861-2:1997 Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors
BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS 6861-1:1987 Mechanical vibration - Balance quality requirements of rigid rotors - Method for determination of permissible residual unbalance
BS EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Reference method

International Organization for Standardization (ISO)

ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 12208:2015 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
ISO/TS 12208:2011 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences
ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
ISO 659:1979 Oilseeds — Determination of hexane extract (or light petroleum extract), called "oil content"
ISO 1940-2:1997 Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors

Korean Agency for Technology and Standards (KATS)

KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS B ISO 19012-1-2016(2021) Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
KS M ISO 2871-2022 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 2871-2-2022 Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)

Japanese Industrial Standards Committee (JISC)

JIS B 0905:1992 Rotating machines -- Balance quality requirements of rigid rotors
JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method

American National Standards Institute （ANSI)

ANSI/UL 466-2004 Electric Scales and Accessories (Proposal Dated 5/16/08)

ZA-SANS

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

CN-STDBOOK

图书 a-4505 Measuring Instrument Verification and Maintenance Guide Electronic Balance

ES-AENOR

UNE 30 001 Classification of chemical products by mass, definition and name

HU-MSZT

MSZ 6192-1980 Weighing grain and its weighing accuracy

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 116-2010 DESIGNATION OF HAZARDOUS SUBSTANCES

GB-REG

REG 40 CFR PART 116-2011 DESIGNATION OF HAZARDOUS SUBSTANCES

TH-TISI

TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

AT-ON

ONORM S 9032-1985 Evaluation methods for the balance quality of rigid rotors

RO-ASRO

STAS 9580-1986 parallelipiped cast iron weights for aitomatjc weighing machines Gencrnl technical requirements for quality

German Institute for Standardization

DIN ISO 11465:1996 Soil quality - Determination of dry matter and water content on a mass basis - Gravimetric method (ISO 11465:1993)
DIN EN ISO 15403-1:2009-10 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006); German version EN ISO 15403-1:2008
DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
DIN 15147:1985 Timber flat pallets; quality requirements
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010

GOSTR

GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method
GOST 27869-2019 High purity substances. Method for concentration of microimpurities by ion exchange

GOST

GOST R 70966-2023 Quantum electronics products. Classification and system of designations

European Committee for Standardization (CEN)

EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)

SCC

DANSK DS/EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
BS 9741:1978 Sectional specification for inductors of assessed quality for use in electronic equipment: basic assessment level
BS EN ISO 2871-1:1994 High molecular mass cationic-active matter
BS ISO 7971-1:2003 Cereals. Determination of bulk density, called "mass per hectolitre"-Reference method
NS 4852:1981 Air quality — Measurement of atmospheric dustfall — Horizontal deposit gauge method
AENOR UNE-EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
BS EN ISO 2871-2:1994 Surface active agents. Detergents. Determination of cationic-active matter content-Cationic-active matter of low molecular mass (between 200 and 500)
NS-EN ISO 15403-1:2008 Natural gas — Natural gas for use as a compressed fuel for vehicles — Part 1: Designation of the quality (ISO 15403-1:2006)
DANSK DS/ISO 1940-2:2009 Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors

SAE - SAE International

SAE EIA-591-1992 Assessment of Quality Levels in PPM Using Variables Test Data (Formerly TechAmerica EIA-591)
SAE EIA-554-1-2015 Assessment of Average Outgoing Quality Levels in Parts Per Million (PPM) (Formerly TechAmerica EIA554-1)

Association Francaise de Normalisation

NF EN 3830:2022 Série aérospatiale - Réseau électrique - Bilan électrique
NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
NF EN ISO 11771:2011 Air quality - Determination of time average mass emissions and emission factors - General approach
NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
NF ISO 2194:1991 Cribles et tamis industriels - Tissus métalliques, tôles perforées et feuilles électroformées - Désignation et dimensions nominales des ouvertures.
NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
NF EN ISO 24197:2022 Vaping products - Determination of the mass of e-liquid vaporized and the mass of aerosol collected

DIN

DIN EN ISO 2871-1:1994 Determination of cationic-active matter content of detergents - High-molecular mass cationic-active matter (ISO 2871-1:1988)

BR-ABNT

ABNT NBR 14521-2011 Acceptance of lots of electronic meters of power - Procedure

VN-TCVN

TCVN 7790-4-2008 Sampling procedures for inspection by attributes.Part 4: Procedures for assessment of declared quality levels

Natural Gas Processor's Association (NGPA)

GPA RR-31-1978 Equilibrium Phase Properties of a Synthetic Sour Gas Mixture and a Simulated Natural Gas Mixture

Indonesia Standards

SNI 01-7136-2005 Physical and physiology quality of teakwood (Tectona grandis Linn f.) seeds

IN-BIS

IS 7952-1976 Nominal width of open-width textile fabric finishing machines

CU-NC

NC 26-92-1987 Drug Plain Tablets. General Quality Specifications

Others: