Instrument for measuring the levelness of gear racks and pinions

Instrument for measuring the levelness of gear racks and pinions, Total:101 items.

The international standard classification for "Instrument for measuring the levelness of gear racks and pinions" includes: Gears , Measuring instruments , Dividing and tool-workpiece holding devices , Linear and angular measurements .

The Chinese standard classification for "Instrument for measuring the levelness of gear racks and pinions" includes: Gear and gear drive , Measuring tool and instrument , Length Measurement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26090-2010 Gear circular pitch measuring instrument
GB/T 37161-2018 Gears—Evaluation of instruments for measurement of individual gears
GB/T 26093-2010 Gear dual-flank meshing measuring instrument
GB/T 26092-2010 Gear helix measuring instrument

Professional Standard - Machinery

JB/T 10025-1999 Gear dual-flank meshing measuring instrument
JB/T 10022-2013 Manual Gear Circular Pitch Measuring Instrument
JB/T 10023-2013 Manual Gear Base Pitch Measuring Instrument
JB/T 10022-1999 Manual gear circular pitch measuring instrument
JB/T 10019-1999 Gear circular pitch measuring instrument
JB/T 10021-1999 Gear helix measuring instrument
JB/T 10023-1999 Manual gear base pitch measuring instrument

National Metrological Technical Specifications of the People's Republic of China

JJF 1124-2004 Calibration specification for Gear involute Measuring instruments
JJF 1209-2008 Calibration Specification for Gear Pitch Measuring Instruments
JJF 1122-2004 Calibration specification for Gear Helix Measuring Instruments

Belgian Standards Institute

NBN E 23-401-1974 gear. Thickness measurement of gear teeth on a rack
NBN 756-1968 Het- meten van de tanddikte van evolvente cilindrische tandwieloverbrengingen Meting over een groep tanden (Wildhabermaat)
NBN 757-1968 Measurement of thickness of extended line gear cylindrical gear system. Measurement of constants

Ente Nazionale Italiano di Unificazione

UNI ISO 18653:2024 Gears - Evaluation of instruments for the measurement of individual gears
UNI 7880-1:1979 Gears. System of accuracy of parallel involute gears. Definitions.
UNI 7880-2:1979 Gears. System of accuracy of parallel involute gears. Basic principles.

International Organization for Standardization (ISO)

ISO 18653-A06:2006 Gears - Evaluation of Instruments for the Measurement of Individual Gears
ISO 18653 Gears - Evaluation of instruments for the measurement of individual gears
ISO 18653:2003 Gears - Evaluation of instruments for the measurement of individual gears
ISO/TR 10064-5:2005 Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments

Association Francaise de Normalisation

NF ISO 18653:2004 Gears - Evaluation of individual gear measuring instruments
NF E23-037*NF ISO 18653:2004 Gears - Evaluation of instruments for the measurement of individual gears
FD E23-008-5*FD ISO/TR 10064-5:2006 Cylindrical gears - Code of inspection practice - Part 5 : recommendations relative to evaluation of gear measuring instruments
FD ISO/TR 10064-5:2006 Cylindrical gears - Practical approval code - Part 5: recommendations for the evaluation of gear measuring instruments

GCC Standardization Organization

GSO ISO 18653:2013 Gears -- Evaluation of instruments for the measurement of individual gears
GSO ISO/TR 14179-1:2009 Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 18653:2016 Gears -- Evaluation of instruments for the measurement of individual gears

British Standards Institution (BSI)

BS ISO 18653:2003 Gears. Evaluation of instruments for the measurement of individual gears
BS 978-2:1952(2000) Gears for instruments and clockwork mechanisms — Part 2 : Cycloidal type gears
BS ISO/TR 14179-1:2001 Gears. Thermal capacity. Rating gear drives with thermal equilibrium at 95 C sump temperature

German Institute for Standardization

DIN ISO 18653:2009-12 Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
DIN ISO 18653:2009 Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
DIN ISO 18653 E:2007 Draft Document - Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
DIN ISO 18653 E:2007-01 Draft Document - Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
DIN 4000-169:2010 Tabular layouts of properties - Part 169: Manual gear measuring devices and gear measuring instruments
DIN 4000-169:2010-10 Tabular layouts of properties - Part 169: Manual gear measuring devices and gear measuring instruments
DIN 4000-169 E:2009 Draft Document - Tabular layouts of properties - Part 169: Manual gear measuring devices and gear measuring instruments
DIN 4000-169 E:2009-03 Draft Document - Tabular layouts of properties - Part 169: Manual gear measuring devices and gear measuring instruments
DIN 5480-10:1991 Cylindrical gear rack Involute rack Pressure angle 30° Dimensions and measurements Module 5
DIN 58299 E:2013-03 Toothings (Serrations) for surgical instruments - Profile angles, groove distances
DIN 58299:2014 Toothings (Serrations) for surgical instruments - Profile angles, groove distances

American Gear Manufacturers Association

AGMA ISO 18653-A06:2006 Gears - Evaluation of Instruments for the Measurement of Individual Gears
AGMA 2113-A97 Measuring Instrument Calibration, Gear Tooth Alignment Measurement
AGMA 2114-A98 Measuring Instrument Calibration, Gear Pitch and Runout Measurements
09FTM02-2009 Implementing ISO 18653@ Gears - Evaluation of Instruments for the Measurement of Individual Gears
931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
AGMA 09FTM02-2009 Implementing ISO 18653, Gears - Evaluation of Instruments for the Measurement of Individual Gears
2113-A97-1997 Measuring Instrument Calibration@ Gear Tooth Alignment Measurement
AGMA 931-A02 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
AGMA 97FTM1 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines
AGMA 931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
AGMA 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines
AGMA 93FTM11 The Relative Noise Levels of Parallel Axis Gear Sets with Various Contact Ratios and Gear Tooth Forms
AGMA 2114-A98-1998 Measuring Instrument Calibration, Gear Pitch and Runout Measurements
AGMA 390.03A Gear Handbook Gear Classification, Materials and Measuring Methods for Bevel, Hypoid, Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur, Helical and Master Gears)
390.02-1964 Gear Handbook Gear Classification@ Materials and Measuring Methods for Bevel@ Hypoid@ Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur@ Helical and Master Gears)
AGMA 390.02 Gear Handbook Gear Classification, Materials and Measuring Methods for Bevel, Hypoid, Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur, Helical and Master Gears)
2114-A98-1998 Measuring Instrument Calibration@ Gear Pitch and Runout Measurements
390.03A-1980 Gear Handbook Gear Classification@ Materials and Measuring Methods for Bevel@ Hypoid@ Fine Pitch Wormgearing and Racks Only as Unassembled Gears (Partial Revision by 2000-A88 for Spur@ Helical and Master Gears) (Errata - 1983)
AGMA 2002-C16-2016 Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing
AGMA 93FTM9 Gear Tooth Bending Fatigue Crack Detection by Acoustic Emissions and Tooth Compliance Measurements
AGMA 2113-A97-1997 Measuring Instrument Calibration, Gear Tooth Alignment Measurement

American National Standards Institute （ANSI)

ANSI/AGMA ISO 18653:2006 Gears - Evaluation of Instruments for the Measurement of Individual Gears

Association of German Mechanical Engineers

VDI/VDE 2612 Blatt 5-2015 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
VDI VDE 2612 Blatt-5 E:2013-07 Measuring and testing gears Surface roughness of cylindrical and bevel gears using stylus instruments
VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments
VDI/VDE 2615-2004 Surface raughness measurement on cylindrical gears and bevel gears by means of stylus-type instruments
VDI/VDE 2615-1985 Roughness measurement on cylindrical gears and bevelgears with electrical contact (stylus) instruments
VDI/VDE 2615-1988 Surface roughness measurement on cylindrical gears and bevel gears by means of electrical stylus-type instruments
VDI VDE 2612 Blatt 5-2015 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
VDI VDE 2612 Blatt 5 E:2013-07 Measuring and testing gears Surface roughness measurement methods for cylindrical and bevel gears
VDI 2736 Blatt 4-2014 Thermoplastische Zahnraeder - Ermittlung von Tragfaehigkeitskennwerten an Zahnraedern
VDI 2142 Blatt 2-2007 Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms
VDI VDE 2615-2006 Surface roughness measurement methods for cylindrical and bevel gears
VDI/VDE 2612 BLATT 6-2022 Measuring and testing gears — Testing and monitoring of gear measuring devices
VDI/VDE 2612 BLATT 1-2018 Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile
VDI/VDE 2612 BLATT 1-2016 Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile
VDI VDE 2612 Blatt-6 E:2020-10 Measurement and testing of gears - Testing and monitoring of devices for gear measurement

Japanese Industrial Standards Committee (JISC)

JIS B 1758:2013 Acceptance tests for gear measuring instruments
JIS B 1757-1:2012 Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts
JIS B 1752:1989(1994) Methods of Measurement for Spur and Helical Gears

GM Daewoo

GMKOREA EDS-T-2619-2010 Rack and pinion steering gear elasticity (backlash)
GMKOREA EDS-T-2621-2010 Mechanical efficiency of rack and pinion steering gears

GM Europe

GME L-9A-13-1987 Elasticity (Backlash) of Rack and Pinion Steering Gear
GME 4091-2002 Measurement of Angularity Parallelism Idler Toothed-Belt Drives
GME4091-2002 Perpendicularity and parallelism measurement on deflection pulleys Measurement of Angularity Parallelism Idler Toothed-Belt Drives English/German
GME L-9A-15-1987 Mechanical Efficiency of Rack and Pinion Steering Gear

Gosstandart of Russia

GOST 9459-1987 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits
GOST 11357-1989 Fine-modul bevel gear testers. Types and main specifications. Accuracy norms
GOST 8.490-1983 State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification
GOST 25513-1982 Gear testers. Conventional designations. Terms and definitions

Czech Standards Institute (UNMZ)

CSN 01 4675-1959 Gear measurement of tooth plate

Korean Agency for Technology and Standards (KATS)

KS B 1406-2020 Methods of Measurement for Spur and Helical Gears

National Standardisation Body (ASRO)

STAS 6576-1962 Cylindrical gear measured with straight teeth

Austrian Standards

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

Others: