Five Gas Tests

Five Gas Tests, Total:327 items.

The international standard classification for "Five Gas Tests" includes: Environmental management , Water quality , Relays , Education , Ergonomics , Occupational safety. Industrial hygiene , Ceramics in general .

The Chinese standard classification for "Five Gas Tests" includes: Basic standards and general methods , Analysis methods for toxic substances in water , Hydraulic and pneumatic device , Relay and chopper , Special electronic technology material , Education, Degree and Title , Human Engineering , Technical management , Labor sanitation , Daily use ceramics products .

Professional Standard - Agriculture

空气和废气监测分析方法 5.2.5-2003 Chapter 5 Monitoring of Pollution Sources Chapter 2 Determination of Flue Gas Parameters 5 Flow Rate (A)
空气和废气监测分析方法 5.5.5-2003 Part V Monitoring of Pollution Sources Chapter V Continuous Monitoring of Flue Gas Pollutant Emissions V Determination of Sulfur Dioxide
空气和废气监测分析方法 5.4.8-2003 Chapter 5 Pollution Source Monitoring Chapter 4 Determination of Gaseous Pollutants Octaphosgene
空气和废气监测分析方法 5.4.6-2003 Chapter 5 Pollution Source Monitoring Chapter 4 Determination of Gaseous Pollutants Hexachlorine
空气和废气监测分析方法 5.7.5-2003 Chapter 7 Air Pollution Emergency Monitoring Technology Five Combustible Gases
空气和废气监测分析方法 5.2.6-2003 Chapter 5 Pollution Source Monitoring Chapter 2 Determination of Flue Gas Parameters 6 Flue Gas Components
空气和废气监测分析方法 5.5.8-2003 Part V Monitoring of Pollution Sources Chapter V Continuous Monitoring of Flue Gas Pollutant Discharge VIII Quality Assurance and Quality Control
17 OIE陆生动物诊断试验和疫苗手册-2005 Rabies item I: fluorescent antibody test (FAT)
空气和废气监测分析方法 5.4.5-2003 Chapter 5 Pollution Source Monitoring Chapter 4 Determination of Gaseous Pollutants Pentafluoride
空气和废气监测分析方法 5.5.3-2003 Chapter 5 Pollution Source Monitoring Chapter 5 Continuous Monitoring of Flue Gas Pollutant Emission 3 Determination of Flue Gas Parameters
空气和废气监测分析方法 5.5.1-2003 Part Five Monitoring of Pollution Sources Chapter Five Continuous Monitoring of Flue Gas Pollutant Discharge - An Overview
空气和废气监测分析方法 5.5.6-2003 Part Five Monitoring of Pollution Sources Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Six Determination of Nitrogen Oxides
空气和废气监测分析方法 5.5.2-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Discharge II Installation Requirements
空气和废气监测分析方法 5.5.4-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Four Determination of Smoke and Dust

Group Standards of the People's Republic of China

T/CATSI 05002-2020 Special Technical Requirements for High Pressure Liquefied Gas Tube Skid Container
T/LCAA 011-2022 Guideline for accounting emission reduction of manure treatment project in livestock farm
T/CAPID 003-2022 Technical specification at the project level for assessment of greenhouse gas emissions reductions — Agriculture and forestry biomass power generation
T/CHBAS 48-2023 Gas pentafluoroethane for electronic industry
T/CSTM 01081-2023 Technical specification at the project level for assessment of greenhouse gas emission reductions – Ground granulated blast furnace slag powder replace cement as cementitious component of concrete
T/CAPID 004-2022 Technical specification at the project level for assessment of greenhouse gas emissions reductions —Municipal solid waste incineration power generation
T/CPSI 04201-2024 The calculation method of greenhouse gas emission for conventional oil and gas field development project
T/CACE 066-2022 Procedure requirements at the project level for certificating of greenhouse gas emission reductions
T/CSIQ 9000.4-2018 “Five in One” whole quality support system (QBBSS)- Part 4: Requirements of inspection and test

Military Standard of the People's Republic of China-General Armament Department

GJB 8264-2014 Measurement methods for fiber gas sensor
GJB 912-1990 Qi-5 (705) secondary wind radar

Taiwan Provincial Standard of the People's Republic of China

CNS 14191-5-1998 Tracheal tubes - Part 5:Requipments and methods of test for cuffs and tubes
CNS 14191.5-1998 Tracheal tubes - Part 5:Requipments and methods of test for cuffs and tubes
CNS 14512-2001 Corrosion tests in artificial atmosphere-General requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5703-1999 Basic human body measurements for technological design
GB/T 44100-2024 Evaluation specification for student's athletic ability of Wuti-ball course
GB/T 8972-1988 Water quality--Determination of pentachlorophenol--Gas chromatography
GB/T 25497-2010 Test methods for gas absorbency and release of getters
GB/T 7940.3-2001 Pneumatic fluid power-Five-port directional control valves-Part 3:Code system for communication of valve functions
GB/T 14598.3-1993 Electrical realys Part 5:Insulation tests for electrical relays
GB 8972-1988 Water quality-Determination of pentachlorophenol-Gas chromatography
GB/T 5703-2010 Basic human body measurements for technological design
GB/T 5703-2023 Basic human body measurements for technological design

Professional Standard - Environmental Protection

HJ 591-2010 Water quality - Determination of Pentachlorophenol by Gas Chromatography

Professional Standard - Electron

SJ/Z 9073.2-1987 Electrical relays--Part 5: Insulation tests for electrical relays
SJ 20762-1999 Measurement methods for parameters of gas lasers
SJ 1871-1981 Measurement conditions for gas laser devices

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.45-2017 Determination of toxic substances in workplace air—Part 45: Phosphorus pentoxide and phosphorus pentasulfide
GBZ/T 300.93-2017 Determination of toxic substances in workplace air—Part 93: Pentachlorophenol and its sodium salt

Professional Standard - Pharmaceutical Packaging

YBB 0008(03)-2003 Gas permeation measurement method (trial)

Yunnan Provincial Standard of the People's Republic of China

DB5301/T 89-2023 General requirements for joint surveying and mapping of engineering construction projects

Professional Standard - Energy

NB/T 11327-2023 Test methods for gas permeability in coal seam

Professional Standard - Light Industry

QB/T 1642-1992 Test Method for Apparent Porosity and Bulk Density of Ceramic Body
QB/T 1642-2012 Test method for apparent porosity and bulk density of ceramic body

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33756-2017 Technical specification at the project level for assessment of greenhouse gas emission reductions -- Alternative of raw materials in cement clinker production industry

API - American Petroleum Institute

API RP 1110-2007 Pressure Testing of Steel Pipelines for the Transportation of Gas@ Petroleum Gas@ Hazardous Liquids@ Highly Volatile Liquids or Carbon Dioxide (Fifth edition)
API RP 13J-2014 Testing of Heavy Brines (FIFTH EDITION)
API MPMS 14.7-2018 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 7 - Mass Measurement of Natural Gas Liquids and Other Hydrocarbons (Fifth Edition)
API MPMS 14.1-2001 Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samples for Custody Transfer (Fifth Edition)

SCC

VDI 3490 BLATT 12-1988 Measuring gases; test gases; production of test gases by manometric methods
AENOR UNE-EN 15684:2015 Building hardware - Mechatronic cylinders - Requirements and test methods
07/30166139 DC BS EN 15684. Building hardware. Mechatronic cylinders. Requirements and test methods
10/30203650 DC BS EN 15684. Building hardware. Mechatronic cylinders. Requirements and test methods
VDI 3490 BLATT 2-1980 Measuring gases; Test gases; Manufacturing processes; Overview
VDI 3490 BLATT 3-1980 Measurement of gases; test gases; requirements and measures for transfer
VDI 3490 BLATT 6-1988 Measuring gases; Test gases; Dynamic production with gas mixing pumps
BS EN 16867:2020+A2:2024 Building hardware. Mechatronic door furniture. Requirements and test methods
VDI 2468 BLATT 10-1995 Measuring gaseous emissions — producing hydrogen peroxide test gas
VDI 3490 BLATT 5-1980 Measuring gases; test gases; determining composition by comparison methods
AENOR UNE 22503:1981 Accumulator batteries for mine locomotives with firedamp. Items. Vibration test.
AWWA WQTC60787 Two-of-Five Odor Test: A Practical Method for Routine Sensory Analysis
VDI 3490 BLATT 4-1980 Measuring gases; test gases; production using gravimetric methods
BS 4947:1973 Specification for test gases for gas appliances
BS 4947:1984 Specification for test gases for gas appliances
NS-EN 16867:2020+A2:2024 Building hardware - Mechatronic door furniture - Requirements and test methods
NS-EN 437:2018 Test gases - Test pressures - Appliance categories
NS-EN 437:2021 Test gases - Test pressures - Appliance categories
DANSK DS/EN 437:2021 Test gases – Test pressures – Appliance categories
AENOR UNE-EN 437:2022 Test gases - Test pressures - Appliance categories
BS EN 437:2018 Test gases. Test pressures. Appliance categories
SN-CEN/TR 1404:2024 Test gases - Determination of emissions from appliances burning gaseous fuels during type-testing
DIN EN 437/A1 E:2007 Draft Document - Test gases - Test pressures - Appliance categories; German version EN 437:2003/prA1:2007
VDI 2468 BLATT 8-2006 Measuring gaseous emissions — Measuring peroxyacetyl nitrate (PAN) — Producing PAN test gas
DIN 51913 E:2012 Draft Document - Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
BS EN 437:1994 Specification for test gases, test pressures and categories of appliance, for gas appliances
ASQ/ISO E14064-2:2006 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
ISO 14064-2:2019 Plus Redline Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
DANSK DS/ISO 14064-2:2019 Greenhouse gases – Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
NS-ISO 14064-2:2006 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
DANSK DS/EN 1527:2019 Building hardware – Hardware for sliding doors and folding doors – Requirements and test methods
AENOR UNE-EN 1527:2014 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
NS-EN 1527:2019 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
BS EN 60512-11-14:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11p. Flowing single gas corrosion test
BS EN 60512-11-7:1997 Connectors for electronic equipment. Tests and measurements. Climatic tests-Test 11g. Flowing mixed gas corrosion test
CAN/CSA-ISO 14064-2:2006(R2011) Greenhouse Gases - Part 2: Specification with Guidance at the Project Level for Quantification, Monitoring and Reporting of Greenhouse Gas Emission Reductions or Removal Enhancements
BS ISO 14064-2:2006 Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
AENOR UNE-EN ISO 14064-2:2012 Greenhouse gases. Part 2: Specification with guidance, at the project level, for the quantification, monitoring and reporting of emissions reductions or increases in greenhouse gas removals. (ISO 14064-2:2006...
DANSK DS/EN 13185:2001 Non-destructive testing – Leak test – Tracer gas method
BS PD CEN/TR 1404:2024 Test gases. Determination of emissions from appliances burning gaseous fuels during type-testing
MIL MIL-T-51461-1980 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
AWWA ACE91232 Large Meter Testing and Repair Programs
BS PD ISO/TR 21624:2020 Nanotechnologies. Considerations for in vitro studies of airborne nano‐objects and their aggregates and agglomerates (NOAA)
DANSK DS/EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods
ICT Protocol - Version 1:2012 ICT Greenhouse Gas Reduction Project Protocol: Quantification and Reporting Version 1
DIN EN 1527 E:2017 Draft Document - Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods; German and English version prEN 1527:2017
NS-EN 13126-1:2011 Building hardware — Hardware for windows and door height windows — Requirements and test methods — Part 1: Requirements common to all types of hardware
DANSK DS/EN 60068-2-60:2015 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
VDI 2291-2016 Emission reduction — Test criteria for monitoring vapour recovery systems
DANSK DS/EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
NS-EN ISO 14064-2:2019 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019)
NS-EN 1303:2015 Building hardware — Cylinders for locks — Requirements and test methods
DANSK DS/EN ISO 14064-2:2019 Greenhouse gases – Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019)
VDI 3484 BLATT 1-2001 Measuring gaseous emissions — Measuring indoor air pollution — Measuring test gases; Determination of formaldehyde concentration using the sulphite-pararosaniline method
NS-EN 13126-16:2019 Building hardware — Hardware for windows and door height windows — Requirements and test methods — Part 16: Hardware for Lift and Slide windows
NS-EN 1303:2005 Building hardware — Cylinders for locks — Requirements and test methods
NS-EN 1303:1998 Building hardware — Cylinders for locks — Requirements and test methods

Association of German Mechanical Engineers

DVS 0971-2012 Things to note when selecting gas hoses for gas shielded welding

KR-KS

KS C IEC 61779-5-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 5 Performance requirements for Group II devices for detecting combustible gas volume fraction
KS C IEC 60068-2-60-2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
KS I ISO 14064-2-2020 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

Association Francaise de Normalisation

NF EN 15684:2020 Quincaillerie pour le bâtiment - Cylindres mécatroniques - Exigences et méthodes d'essai
NF EN 16602-70-02:2015 Product assurance of space projects - Thermal vacuum degassing test for selection of materials for a space project
NF EN 437:2021 Gaz d'essais - Pressions d'essais - Catégories d'appareils
NF D30-500*NF EN 437:2021 Test gases - Test pressures - Appliance categories
NF EN 1527+A1:2021 Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes - Exigences et méthodes d'essai
NF EN 1527/IN1:2021 Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes - Exigences et méthodes d'essai
NF X50-016*NF EN ISO 13293:2013 Recreational diving services - Requirements for gas blender training programmes
NF EN 1303:2015 Building hardware - Lock cylinders - Requirements and test methods
NF EN 13126-1:2022 Building hardware - Window and patio door fittings - Requirements and test methods - Part 1: requirements common to all types of fittings
NF EN 13126-16:2019 Building hardware - Window and patio door fittings - Requirements and test methods - Part 16: lifting sliding window fittings
NF EN 17869:2023 Furniture hardware - Test methods for determining the mechanical resistance and rigidity of furniture body assembly fittings
NF EN 12051:1999 Building hardware - Door and window locks - Requirements and test methods
NF P26-336*NF EN 15684:2020 Building hardware - Mechatronic cylinders - Requirements and test methods
NF G52-226:2007 Leather - Chemical tests - Determination of pentachlorophenol content.
NF EN ISO 14064-2:2019 Greenhouse gases - Part 2: specifications and guidelines, at the project level, for the quantification, monitoring and reporting of emission reductions or increases in removals of greenhouse gases ...
NF X30-364-2*NF EN ISO 14064-2:2019 Greenhouse gases - Part 2 : specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

ISUZU - Isuzu Motors Ltd.

INDEX VOLUME 6-2012 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)

YU-JUS

JUS H.G8.061-1983 Reagents. Copper sulphate pentahydrate. Determination of sulphate pentahydrate content. Volumetric method
JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
JUS M.E3.151-1996 Pressure testing pipeline and gas appliances
JUS N.R1.500-1980 Semioonductor ?evices. Acceptance. Electrical tests

Spanish Association for Standardization (UNE)

UNE-EN 15684:2021 Building hardware - Mechatronic cylinders - Requirements and test methods
UNE 9-009-1985 Characteristics of gas fuel required for boiler projects
UNE-EN 437:2022 Test gases - Test pressures - Appliance categories
UNE-EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
UNE 49756-2:1974 TESTS OF CISTERN-CONTAINERS, SERIES 1 FOR GAS AND LIQUIDS
UNE-EN 13185:2001 NON DESTRUCTIVE TESTING - LEAK TEST - TRACER GAZ METHOD.
UNE-EN ISO 14064-2:2019 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019)
UNE-EN 1527:2020+A1:2022 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
UNE-EN 1303:2006 Building hardware - Cylinders for locks - Requirements and test methods
UNE-EN 1303:2016 Building hardware - Cylinders for locks - Requirements and test methods
UNE-EN 60068-2-60:2016 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
UNE-EN 13126-16:2019/AC:2022 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows
UNE 85411:1991 HANDWARE FOR DOORS IN BUILDINGS. SAFETY BOLTS. TESTS.

PL-PKN

PN M34503-1992 Gas pipelines. Test of gas pipelines
PN C96003-1985 Petroleum products Determination of hydrocarbons C1 — C5 content in hydrocarbon gases C3 — C4 by gas chromatography method
PN M35002-1988 Industrial gas burners frenpral fesK
PN B94408-1991 Building finish hardwares. Locks. Methodes of tests

German Institute for Standardization

DIN 50450-1:1987-08 Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of water impurity in hydrogen, oxygen, nitrogen, argon and helium by using a diphosphorus pentoxide cell
DIN 51851:1980-04 Testing of gaseous fuels and other gases; calculation of reduced gas volume
DIN EN 437:2021-07 Test gases - Test pressures - Appliance categories; German version EN 437:2021 / Note: This standard is part of the DVGW body of rules.
DIN EN 437:2019 Test gases - Test pressures - Appliance categories
DIN EN 437:2003 Test gases – Test pressures – Appliance categories
DIN 51854:1993-09 Testing of gaseous fuels and other gases; determination of ammonia content
DIN EN 16867 E:2018-12 Building hardware - Mechatronic door furniture - Requirements and test methods
DIN EN 16867 E:2015-06 Building hardware - Mechatronic door furniture - Requirements and test methods
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 51862:1982-09 Testing of gaseous fuels and other gases; determination of naphthalene content (crude naphthalene)
DIN EN 15684:2019 Building hardware - Mechatronic cylinders - Requirements and test methods; German and English version prEN 15684:2019
DIN 50450-1:1987 Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of water impurity in hydrogen, oxygen, nitrogen, argon and helium by using a diphosphorus pentoxide cell
DIN 51872-4:1990-06 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure
DIN 51854:1993 Testing of gaseous fuels and other gases; determination of ammonia content
DIN EN ISO 13293 E:2011-04 Recreational Diving Service Gas Mixer Training Program (Draft)
DIN EN ISO 14064-2:2020-05 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019); German and English version EN ISO 14064-2:2019
DIN EN 1527:2022-02 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods; German version EN 1527:2019+A1:2021
DIN EN 1527 E:2017-12 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
DIN EN 1303:2015-08 Building hardware - Cylinders for locks - Requirements and test methods; German version EN 1303:2015
DIN EN 1527 E:2011-05 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
DIN 51871:1985-12 Testing of gaseous fuels and other technical gases; determination of dew point of water vapour; method of means of cooled mirror
DIN 51913 E:2012-04 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN 60512-11-7:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003); German version EN 60512-11-7:2003 / Note: DIN EN 60512-11-7 (1996-08) remains valid alongside t...
DIN EN ISO 14064-2 E:2017-08 Greenhouse Gases Part 2: Guidelines for the Quantification, Monitoring and Reporting of Project-Level Greenhouse Gas Emission Reductions or Enhanced Removals (Draft)
DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN 60512-11-14:2004-06 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 / Note: DIN EN 60512-11-14 (1997-06) remains valid alongs...
DIN 51872-5:1996 Testing of gaseous fuels and other gases - Determination of the components - Part 5: Capillary gaschromatographic procedure
DIN EN 16867:2022-02 Building hardware - Mechatronic door furniture - Requirements and test methods; German version EN 16867:2020+A1:2021
DIN EN 13126-1:2022 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
DIN 51869:2000-09 Testing of gaseous fuels and other gases - Determination of water content according to Karl Fischer - coulometric method
DIN EN 437:2021 Test gases - Test pressures - Appliance categories; German version EN 437:2021

Underwriters Laboratories (UL)

UL 340-2009 UL Standard for Safety Test for Comparative Flammability of Liquids (Fifth Edition)
UL TR 58-1993 An Investigation of Flammable Gases or Vapors with Respect to Explosion-Proof Electrical Equipment

RU-GOST R

GOST 4.106-1983 System of product quality indices. Gas extinguisher mixtures. Nomenclature of indices
GOST 4.170-1985 System of product-quality indices. Analysers for aerosols of solid and granular materials. Nomenclature of indices
GOST 24813-1981 Testing of items the point of view of influence on climatic factors. General
GOST 4.195-1985 System of product-quality indices. Electrical standards. Nomenclature of indices
GOST R ISO 13293-2013 Recreational diving services. Requirements for gas blender training programmes
GOST IEC 60754-1-2011 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
GOST IEC 61779-2-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
GOST R ISO 14064-2-2021 Greenhouse gases. Part 2. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

VDI - Verein Deutscher Ingenieure

VDI 3490 Blatt 1-1980 Measurement of gases; calibration gas mixtures; terms and legends
VDI 2468 Blatt 8-2003 Ambient air measurement - Measurement of peroxyacetyl nitrate (PAN) - Preparation of PAN calibration gas

BE-NBN

NBN T 04-503-1985 Light olefins for industrial use - Determination of hydrocarbon impurities by gsa chroma-tography-General considerations

AT-ON

ONORM ISO 5599 Teil.1:1983 Pneumatic fluid power; five-port directional control valves; mounting surface; general
OENORM EN 437-2021 Test gases - Test pressures - Appliance categories
ONORM C 2050-1999 Petrols - Vapour recovery systems - Testing methods - Periodical testing
ONORM M 7443 Teil.2-1989 Gas appliances with atmospheric burners; gas families, appliance categories and fest gases

CEN - European Committee for Standardization

EN 437:2018 Test gases - Test pressures - Appliance categories
EN 437:1993 Test Gases - Test Pressures - Appliance Categories (Incorporates Amendments A1: 1997 and A2: 1999)
EN 437:2021 Test gases - Test pressures - Appliance categories
EN ISO 14064-2:2019 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification@ monitoring and reporting of greenhouse gas emission reductions or removal enhancements
EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification@ monitoring and reporting of greenhouse gas emission reductions or removal enhancements

European Committee for Standardization (CEN)

EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 464:1994 Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test)
EN 15684:2020 Building hardware - Mechatronic cylinders - Requirements and test methods
EN 15684:2012 Building hardware - Mechatronic cylinders - Requirements and test methods

GSO

OS GSO 564:2014 Gases – Medical Oxygen Gas - Test methods
GSO 2404:2014 GASES – MEDICAL NITROGEN GAS –TEST METHODS
OS GSO 746:2014 Gases – Medical Carbon Dioxide Gas - Test Methods
GSO 697:2014 Gases – Medical air – Test methods
OS GSO 697:2014 Gases – Medical air – Test methods
BH GSO 697:2015 Gases – Medical air – Test methods
BH GSO 2404:2015 GASES – MEDICAL NITROGEN GAS –TEST METHODS
GSO 564:2014 Gases – Medical Oxygen Gas - Test methods
GSO 746:2014 Gases – Medical Carbon Dioxide Gas - Test Methods
BH GSO ISO 14064-2:2017 Greenhouse gases -- Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
OS GSO ISO 14064-2:2015 Greenhouse gases -- Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
BH GSO ASTM D1071:2015 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
OS GSO ASTM D1071:2014 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
GSO IEC 60512-11-14:2015 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
GSO ISO 14064-2:2015 Greenhouse gases -- Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
OS GSO 559:1994 Methods of test for dissolved acetylene gas.
OS GSO IEC 60068-2-60:2015 Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test
GSO IEC 60512-11-7:2015 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
OS GSO ASTM F559:2010 Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
BH GSO IEC 60512-11-14:2016 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

Federal Aviation Administration (FAA)

FAA 14 CFR PART 156-2011 State block grant pilot program

Natural Gas Processor's Association (NGPA)

GPA RR-70-1983 Phase Equilibrium Studies for Processing of Gas from CO2 EOR Projects

Lithuanian Standards Office

LST EN 437-2021 Test gases - Test pressures - Appliance categories
LST EN 437-2003+A1-2009 Test gases - Test pressures - Appliance categories
LST EN 13126-1-2012 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware

RO-ASRO

STAS 7511-1981 Testing of metals V - NOTCH IMPACT TEST

British Standards Institution (BSI)

BS EN 437:2021 Test gases. Test pressures. Appliance categories
PD CEN/TR 1404:2024 Test gases — Determination of emissions from appliances burning gaseous fuels during type-testing
BS EN ISO 13293:2012 Recreational diving services. Requirements for gas blender training programmes
20/30419078 DC BS EN 437. Test gases. Test pressures. Appliance categories
BS EN 60068-2-60:2015 Environmental testing. Tests. Test Ke: Flowing mixed gas corrosion test
BS EN ISO 14064-2:2019 Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
PD CEN/TR 14823:2003 Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method
PD ISO/TR 21624:2020 Nanotechnologies. Considerations for in vitro studies of airborne nano‐objects and their aggregates and agglomerates (NOAA)
BS EN 15684:2012 Building hardware. Mechatronic cylinders. Requirements and test methods
BS EN 15684:2020 Building hardware. Mechatronic cylinders. Requirements and test methods
BS ISO 10100:2020 Hydraulic fluid power. Cylinders. Acceptance tests
BS EN ISO 17070:2015 Leather. Chemical tests. Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
BS ISO 5599-2:2001 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector
BS EN ISO 17070:2007 Leather. Chemical tests. Determination of pentachlorophenol content
BS ISO 22137:2020 Space systems — Program management — Test reviews
BS 8424:2004(2012) Building hardware — Pull handles — Requirements and test methods

Danish Standards Foundation

DS/EN 437:2021 Test gases – Test pressures – Appliance categories
DS/EN 437+A1:2009 Test gases - Test pressures - Appliance categories
DS/EN 13185:2001 Non-destructive testing - Leak test - Tracer gas method
DS/EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

IT-UNI

UNI EN 437-2021 Test gases - Test pressures - Appliance categories

CH-SNV

SN EN 437-2021 Test gases - Test pressures - Appliance categories

HU-MSZT

MSZ 21862/13-1981 Testing of gaseous air pollutants in workplaces, determination of phosphorus pentoxide and phosphoric acid, application of photometry
MSZ 21862/5-1976 How to test nitrogen dioxide gas

BSI

DANSK DS/CEN/TR 1404:2024 Test gases – Determination of emissions from appliances burning gaseous fuels during type-testing

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.7-1984 Method of Test for Measurement of Flow of Gas

CZ-CSN

CSN 07 5806 Z1-1998 Burning gas fuel. test
CSN IEC 233:1994 Tests on hollow insulators for use in electrical equipment

American National Standards Institute （ANSI)

ANSI/TIA/EIA 102BAAA-1-1999 Project 25 FDMA Common Air Interface Addendum 1
ANSI/ISO E14064-2:2006 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

National Association of Corrosion Engineers (NACE)

NACE 2103-2003 Liquid-Applied Coatings for High-Temperature Atmospheric Service (Item No. 24219)

US-FCR

FCR COE RPMAS 66270-1977 PRESSURE TESTING OF GAS LINES

GOST

GOST R 71114-2023 System of standards for implementing climate projects. Tool to determine the mass flow of a greenhouse gas in a gaseous stream
GOST R 71100-2023 Stationary source emissions. Determination of greenhouse gas emissions in energy intensive industries. Part 5. Lime industry

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 4.3-1996 Subsurface Exploration and Testing Programs
DIVISION I 5.3-1996 Subsurface Exploration and Testing Programs

Korean Agency for Technology and Standards (KATS)

KS I ISO 4225:2012 Air Quality - General - Units of Measurement
KS I 2002-2005 Air quality－General aspects(Units of measurement)
KS A ISO 7250:2008 Basic human body measurements for technological design
KS A ISO 7250:2014 Basic human body measurements for technological design
KS M 5547-1984 TEST METHOD FOR GAS OF PAINT (Bell jar)
KS C IEC 60512-11-10-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 11－10：Climatic tests－Test 11j：Cold
KS C IEC 60512-11-9-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 11－9：Climatic tests－Test 11i：Dry heat
KS M 0038-1993 Testing methods for determination of trace components in diluent gas and zero gas
KS C IEC 60068-2-60:2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
KS M 5546-1984 TEST METHOD FOR GAS OF PAINT (OVEN METHOD)
KS I ISO 14064-2:2020 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
KS C IEC 60512-11-6-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 11－6：Climatic tests－Test 11f：Corrosion, salt mist
KS C 6590-2007 Performance requirements for combustible gas detectors
KS B ISO 5599-2-2023 Pneumatic fluid power－Five－port directional control valves－Part 2：Mounting interface surfaces with optional electrical connector
KS M ISO 17070:2017 Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
KS M ISO 17070:2007 Leather－Chemical tests－Determination of pentachlorophenol content

SAE - SAE International

SAE MAM2604B-1994 Pressure Testing@ Gaseous Media 275 kPa
SAE MAM2601C-2003 Pressure Testing@ Gaseous Media 70 kPa
SAE AMS2601G-2004 Pressure Testing@ Gaseous Media 10 psi
SAE AMS2604F-1994 Pressure Testing@ Gaseous Media 40 psi
SAE MAM2604C-2003 Pressure Testing@ Gaseous Media 275 kPa
SAE AMS2604G-2004 Pressure Testing@ Gaseous Media 40 psi
SAE AMS2601F-1994 Pressure Testing@ Gaseous Media 10 psi
SAE MAM2601B-1994 Pressure Testing@ Gaseous Media 70 kPa

Indonesia Standards

SNI 19-4794-1998 Test methods for pentachlorophenol in water and waste water
SNI 19-2965-1992 Exhaust - gases, Test method for mercury content
SNI 19-1666-1989 Exhaust-gases, Test methods for vanadium content

International Organization for Standardization (ISO)

ISO 14064-2:2019 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
ISO 17070:2015 Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
ISO 17070:2006 Leather - Chemical tests - Determination of pentachlorophenol content

American Society for Testing and Materials (ASTM)

ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM F559-95(2000) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
ASTM F559-05(2017) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors - Electrical tests
AS/NZS 1660.3:1998(R2001) Test methods for electric cables, cords and conductors - Electrical tests
AS/NZS 1660.3:1998/AMD 1:2001 Test methods for electric cables, cords and conductors - Electrical tests
AS/NZS 2885.5:2012 Pipelines - Gases and Liquid Petroleum - Field Pressure Testing

Society of Automotive Engineers (SAE)

SAE AIR6197-2017 Site Selection Considerations for New Re-Located Gas Turbine Engine Test Facilities

IN-BIS

IS 9000 Pt.1-1988 Basic Environmental Testing Procedures for Electronic and Electrical Items Part 1 General Principles
IS 9002 Pt.10/Sec.1-1985 Specification for Environmental Test Equipment for Electronic and Electrical Projects Part 1O Impact Testing Machines Section 1: Free Fall Type

SE-SIS

SIS SS IEC 233:1984 Insulators — Tests ort hollow insulators for use in electrical equipment

Canadian Standards Association (CSA)

CAN/CSA-ISO 14064-2:2006 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (First Edition)
CSA ICT PROTOCOL-2012 ICT Greenhouse Gas Reduction Project Protocol: Quantification and Reporting (Version 1)

Standard Association of Australia （SAA）

IEC 60068-2-60:2015 RLV Environmental testing — Part 2-60: Tests — Test Ke: Flowing mixed gas corrosion test
AS 1773:1975 Fifth wheel and turntable assemblies - test requirements and criteriafor fifth wheel and turntable assemblies

American Society of Quality Control （ASQC)

ASQ E14064-2-2006 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (T821E)

(U.S.) Plastic Pipe Association

PPI INSPECTIONS-1999 Inspections, Test and Safety Considerations

TH-TISI

TIS 14064.2-2009 Greenhouse gases.part 2: specificationwithguidanceattheprojectlevelforquantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

Japanese Industrial Standards Committee (JISC)

JIS K 0225:1990 Testing methods for determination of trace components in diluent gas and zero gas
JIS K 0225:2002 Testing methods for determination of trace components in diluent gas and zero gas

American Industrial Hygiene Association （AIHA)

ASSE 5000-APPENDIX F-1998 Field Test Procedures Using Two-, Three- and Five-Vavlve Test Kits

International Electrotechnical Commission (IEC)

IEC 60068-2-60:2015 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test

Semiconductor Equipment and Materials International (SEMI)

SEMI F69-0708-2008 TEST METHODS FOR TRANSPORT AND SHOCK TESTING OF GAS DELIVERY SYSTEMS

GOSTR

GOST R ISO 14064-2-2007 Greenhouse gases. Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements