Limiting oxygen index test

Limiting oxygen index test, Total:169 items.

The international standard classification for "Limiting oxygen index test" includes: Explosives. Pyrotechnics , Protection against fire in general , Chemical analysis , Metallic coatings .

The Chinese standard classification for "Limiting oxygen index test" includes: Hygiene, safety and labor protection , Fire-fighting in general , Basic standards and general methods for water treatment agent , Material Protection .

未注明发布机构

DIN EN 1839 E:2010-01 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 1839 E:2014-06 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN 51733 E:2015-07 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN EN 60424-4 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
DIN EN 60424-2 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
ASTM RR-D18-1013 2005 D4318-Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
DIN EN IEC 63093-8:2019 Ferrite cores – Guidelines on dimensions and limits of surface damage – Part 8: E cores
DIN EN 60424-1 E:2013-05 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification

Taiwan Provincial Standard of the People's Republic of China

CNS 2925-1968 Practices for Designating Significant Places in Specificd Limiting Values

Professional Standard - Coal

MT/T 837-1999 Method of determining the minimum oxygen content concentration for coal dust explosion

Group Standards of the People's Republic of China

T/CAPDA 034-2022 Test Method for the Limiting Oxygen Concentration of Pesticide Dust Clouds

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38301-2019 Determination of limiting oxygen concentration(LOC) of flammable gases and vapours

Professional Standard - Electron

SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22593-2008 Water treatment reagent - General rules for the determination of limiting viscosity number
GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys-Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus

Professional Standard - Machinery

JB/T 8988-1999 Test method for the determination of oxygen index of insulation liquids

American Society for Testing and Materials (ASTM)

ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM E2931-13(2019) Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM E2931-13 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM E2079-07(2013) Standard Test Methods for Limiting Oxygen 40;Oxidant41; Concentration in Gases and Vapors
ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM F970-00 Standard Test Method for Static Load Limit
ASTM F970-07 Standard Test Method for Static Load Limit
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM F970-17 Standard Test Method for Static Load Limit
ASTM F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading

The American Road & Transportation Builders Association

AASHTO T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2016 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2020 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-16 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils Twentieth Edition

AASHTO - American Association of State Highway and Transportation Officials

T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T90-1994 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils (Twentieth Edition)

SCC

AASHTO T 90-2000(2008) Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 90-2022 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
NS-EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
BS 6786:1986 Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
DANSK DS/EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
AENOR UNE-EN 14756:2007 Determination of the limit oxygen concentration (CLO) for flammable gases and vapors.
NS-EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
UNE-EN 12373-9:1999 ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 9: MEASUREMENT OF WEAR RESISTANCE AND WEAR INDEX OF ANODIC OXIDATION COATINGS USING AN ABRASIVE WHEEL WEAR TEST APPARATUS.
NS-EN 12373-9:1998 Aluminium and aluminium alloys — Anodizing — Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
CEI EN 60424-4/AB:2016 Ferrite cores - Guidelines on the limits of surface irregularities Part 4: Ring-cores
DANSK DS/EN ISO 6284:1999 Construction drawings – Indication of limit deviations
DANSK DS/EN 60424-1:2016 Ferrite cores – Guidelines on the limits of surface irregularities – Part 1: General specification
CSA S408-1981(R2001) Guidelines for the Development of Limit States Design
CEI EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities Part 4: Ring-cores
CEI EN 61144:1998 Test method for the determination of oxigen index of insulating liquids
DANSK DS/EN 61144:1994 Test method for the determination of oxygen index of insulating liquids
AENOR UNE 26131:1959 BRAKE PADS. TESTS OF CHARACTERISTICS AND LIMITS OF HOMOGENEITY
NS 8004:1982 Geotechnical testing - Laboratory methods - Shrinkage limit
BS 2782-1 METHOD 141:1986 Methods of testing plastics. Thermal properties-Determination of flammability by oxygen index
NS-EN 1162:1996 Feather and down — Test methods — Determination of the oxygen index number
DANSK DS/EN 1162:1997 Feather and down - Test methods - Determination of the oxygen index number
ASD-STAN prEN 3002:1970 Chromic acid anodizing - Testing of adhesives

British Standards Institution (BSI)

BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
BS EN 60424-4:2001 Guidance of the limits of surface irregularities of ferrite cores - Ring cores
BS EN 60424-4:2016 Ferrite cores. Guidelines on the limits of surface irregularities. Ring-cores
BS EN 60424-8:2015 Ferrite cores. Guidelines on the limits of surface irregularities. PQ-cores
BS 1916-1:2009 Limits and fits for engineering Part 1: Guide to limits and tolerances
BS EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
BS EN ISO 6284:1999(2000) Construction drawings — Indication of limit deviations
BS EN 61144:1993 Test method for the determination of oxygen index of insulating liquids
BS EN 1622:2006 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS EN 14034-4:2005 Determination of explosion characteristics of dust clouds - Determination of the limiting oxygen concentration LOC of dust clouds

European Committee for Standardization (CEN)

EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
prEN 61144-1992 Test method for the determination of oxygen index of insulating liquids

Association Francaise de Normalisation

NF T12-005:1981 Cellulose. Determination of the maximum viscosity index of the cellulose in dilute solutions.
NF S66-250*NF EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
NF T51-061:1971 PLASTICS. DETERMINATION OF THE VISCOSITY NUMBER AND THE LIMITING VISCOSITY NUMBER OF POLYETHYLENES AND POLYPROPYLENES IN DILUTE SOLUTION.
NF EN 1839:2017 Determination of the explosive limits of gases and vapors and determination of the limiting oxygen concentration (CLO) of flammable gases and vapors
NF P94-051:1993 Soil : inverstigation and testing. Determination of Atterberg's limits. Liquid limit test using cassagrande apparatus. Plastic limit test on rolled thread.
NF ISO 1628-6:1993 Plastics - Determination of viscosity index and limiting viscosity index - Part 6: methyl methacrylate polymers
NF EN 1162:1997 Feathers and down - Test methods - Measurement of oxygen index
NF P94-052-1:1995 Soil : investigation and testing. Atterberg limit determination. Part 1 : liquid limit. Cone penetrometer method.
NF C27-250*NF EN 61144:1993 Test method for the determintation of oxygen index of insulating liquids.
NF EN 61144:1993 Test method for determining the oxygen index of liquid insulation

NO-SN

NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit

Society of Automotive Engineers (SAE)

SAE ARP5448/1-2010 Plain Bearing Radial Limit and Ultimate Load Tests

SAE - SAE International

SAE ARP5448/1A-2016 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5448/1-2004 Plain Bearing Radial Limit and Ultimate Load Tests

German Institute for Standardization

DIN 25482-2:1992 Limit of detection and limit of decision for nuclear radiation measurements; counting spectrometric measurements, neglecting the influence of sample treatment
DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
DIN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN EN 1839:2017-11 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017
DIN EN 1839:2017-04 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017 / Note: DIN EN 1839 (2012-12) and DIN EN 14756 (2007-02) remain valid alongside this standard until 2018-01-11.
DIN EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; English version of DIN EN 14756:2007-02
DIN 25482-6:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements with allowance for the influence of sample treatment and equipment used
DIN EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999
DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
DIN 25482-5:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment
DIN EN 61144:1994 Test method for the determination of oxygen index of insulating liquids (IEC 61144:1992); German version EN 61144:1993
DIN 32645:2008 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 25482-4:1995 Limit of detection and limit of decision for nuclear radiation measurements - Part 4: Counting alphaspectrometric measurements, neglecting the influence of sample treatment and equipment used
DIN EN 1622:2006 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); English version of DIN EN 1622:2006-10
DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN EN 1162:1996 Feather and down - Test methods - Determination of the oxygen index number; German version EN 1162:1996
DIN EN 1162:1996-10 Feather and down - Test methods - Determination of the oxygen index number; German version EN 1162:1996

YU-JUS

JUS U.B1.020-1980 Testing ofsoils. Determination ofAtterberg limits

International Electrotechnical Commission (IEC)

IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
IEC 60424-2:1997 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores
IEC 60424-1:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-3:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
IEC 63093-1:2020 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
IEC 63093-13:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
IEC 63093-14:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFD-cores
IEC 61144:1992 Test method for the determination of oxygen index of insulating liquids
IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
IEC 63093-7:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores
IEC 63093-8:2018 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores
IEC 63093-12:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 12: Ring-cores

Korean Agency for Technology and Standards (KATS)

KS C IEC 60424-1:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-2:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-2:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS F 2303-2000 Test method for liquid limit and plastic limit of soils
KS C IEC 60424-4:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-2-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS B ISO 12004-2003(2018) Guidelines for creating forming limit diagrams for metallic materials
KS C IEC 60424-4-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-3:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS C IEC 60424-1-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 61144-2019 Test method for the determination of oxygen index of insulating liquids

AENOR

UNE 103104:1993 TEST FOR PLASTIC LIMIT OF A SOIL.
UNE-EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
UNE-EN 61144:1994 TEST METHOD FOR THE DETERMINATION OF OXYGEN INDEX OF INSULATING LIQUIDS.

Indonesia Standards

SNI 7658-2010 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
SNI 3422-2008 Testing methods for shrinkage limit of soils
SNI 1966-2008 Testing methods for determination of plastiicity limit and index of soil placity

SE-SIS

SIS SS 02 71 22-1990 Geotechnical tests — Shrinkage limit

KR-KS

KS C IEC 60424-2-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4-2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores

Lithuanian Standards Office

LST EN 14756-2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
LST EN 1162-2000 Feather and down - Test methods - Determination of the oxygen index number

Danish Standards Foundation

DS/EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
DS/EN ISO 6284:2000 Construction drawings - Indication of limit deviations
DS/EN 1162:1997 Feather and down - Test methods - Determination of the oxygen index number

International Organization for Standardization (ISO)

ISO 12004:1997 Metallic materials - Guidelines for the determination of forming-limit diagrams
ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
ISO 8252:1987 Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
ISO 8251:1987 Anodized aluminium and aluminium alloys; Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus

ZA-SANS

SANS 5852:2008 Plastic limit and plasticity index of fines in aggregates for base-courses

CZ-CSN

CSN 42 0345-1987 Metal testing. Testing of proportional limit of tensile strength

Japanese Industrial Standards Committee (JISC)

JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
JIS A 1205:2009 Test method for liquid limit and plastic limit of soils

GSO

GSO IEC 60424-4:2014 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
BH GSO IEC 60424-4:2016 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
GSO IEC 61144:2015 Test method for the determination of oxygen index of insulating liquids
OS GSO IEC 61144:2015 Test method for the determination of oxygen index of insulating liquids

(U.S.) Ford Automotive Standards

FORD FLTM EU-BQ 009-2-2000 SEAL TEST FOR ANODIZED ALUMINUM

ES-UNE

UNE-EN 1162:1997 FEATHER AND DOWN. TEST METHODS. DETERMINATION OF THE OXYGEN INDEX NUMBER.

Canadian Standards Association (CSA)

CSA S408-1981SP-1981 Guidelines for the Development of Limit States Design R(2001)

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 3-1984 Pruefanweisung fuer Rachenlehren (Grenz-@ Gut-@ Ausschuss-)

Standard Association of Australia （SAA）

AS 4823.2:2006 Feather and down - Methods of test - Determination of the oxygen index number

Others: Fire Endurance Test,Fire Endurance Test,Oxygen Index Test Method,Fire Endurance Test Method,Fire Endurance Test,Soil liquid limit test method,Soil liquid limit test method,Oxygen Index Test,Oxygen Index Test,Limit test basis,test limit