Standard curve of oil smoke and mist

Standard curve of oil smoke and mist, Total:169 items.

The international standard classification for "Standard curve of oil smoke and mist" includes: Wastes in general , Transport exhaust emissions , Waxes, bituminous materials and other petroleum products .

The Chinese standard classification for "Standard curve of oil smoke and mist" includes: Marine internal-combustion engine , Pollutants discharge in general , Petroleum wax , Discharge standard for mobile pollution sources .

Professional Standard-Ships

CB/T 3259-2017 Marine Diesel Engine Crankcase Oil Mist Detector
CB* 3259-1985 Technical Specifications for Crank Case Oil Mist Detector of Marine Diesel Engines
CB 3259-1985 Specifications for crankcase oil mist detectors for marine diesel engines

Group Standards of the People's Republic of China

T/FSS 18-2022 Foshan Standard Range hood
T/CNHA 1025-2020 Assessment requirements for forerunner standard ——Range Hood
T/LNSES 001-2024 Oil fume emission standards for catering industry (Trial)
T/FSS 18-2021 Foshan Standard Range hood
T/ZS 0406-2022 On-line monitor for catering fume
T/SXS 70-2024 Fume online monitoring system

Shandong Provincial Standard of the People's Republic of China

DB37/ 290.4-2000 Smoke Emission Standards for Free Acceleration of Diesel Vehicles
DB37/ 290.6-2000 Smoke emission standard before load of automobile diesel engine
DB37/ 597-2005 Emission Standards for Cooking Fume in Catering Industry

Shanghai Provincial Standard of the People's Republic of China

DB31/ 844-2014 Emission Standards for Cooking Fume in Catering Industry
DB31/ 235-1999 Smoke Emission Standards for Free Acceleration of Diesel Vehicles

Tianjin Provincial Standard of the People's Republic of China

DB12/ 644-2016 Emission Standards for Cooking Fume in Catering Industry

Professional Standard - Environmental Protection

HJ 1077-2019 Stationary source emission—Determination of oil fume and oil mist—Infrared spectrophotometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 18483-2001 Emission standard of cooking fume
GWPB 5-2000 Emission Standards for Oil Fume in Catering Industry (Trial Implementation)
GB/T 2539-2008 Petroleum waxes - Determination of melting point-cooling curve method
GB 14761.6-1993 Emission standard for smoke at free acceleration from vehicle with diesel engine
GB/T 2539-2023 Determination of melting point of petroleum waxes—Cooling curve method

Henan Provincial Standard of the People's Republic of China

DB41/ 1604-2018 Emission Standards for Oil Fume Pollutants in Catering Industry

Professional Standard - Agriculture

GB 3843-1983 Emission standard for smoke at free acceleration from road vehicle with diesel engine

Beijing Provincial Standard of the People's Republic of China

DB11/ 045-2000 emission standard for smoke at free acceleration from vehicles with diesel engines
DB11/ 121-2003 Smoke Emission Standards for Diesel Vehicles Loading and Decelerating

未注明发布机构

DIN ISO 3308 E:2014-04 Routine analytical cigarette-smoking machine - Definitions and standard conditions
CAN/ULC-S529:2016 Standard for Smoke Detectors for Fire Alarm Systems

Chongqing Provincial Standard of the People's Republic of China

DB50/ 21-1999 Chongqing City Catering Industry Fume Emission Standards (Trial)

Professional Standard - Petroleum

SY/T 7549-2000 Determination of viscosity-temperature charts for crude oil with rotational viscometers
SY 7549-2000 Determination of crude oil viscosity-temperature curve: rotational viscometer method

U.S. Military Regulations and Norms

ARMY MIL-P-51062 B NOTICE 1-1996 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-P-51062 B (1)-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-P-51062 B-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-C-11136 A-1955 CANDLE, SMOKE, OIL, SGF2, M6; COMPONENTS FOR
ARMY MIL-P-51062 B VALID NOTICE 2-2004 PUMP, FOG OIL, SMOKE GENERATOR, M4 [Use In Lieu Of: ARMY MIL-P-0051062 D CANC NOTICE 2]

German Institute for Standardization

DIN EN 23015:1994 Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994
DIN 51532:2012-12 Petroleum waxes - Determination of melting point (cooling curve)
DIN 51532:2012 Petroleum waxes - Determination of melting point (cooling curve)
DIN ISO 3308:2000 Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000)
DIN ISO 3841:1983 Petroleum waxes; determination of melting point (cooling curve)

IN-BIS

IS 8118-1976 Smoke emission levels from diesel vehicles

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO M342-1992 Smoke test procedure for evaluating two stroke gasoline engine oils
JASO M342-2003 Two-stroke cycle gasoline engine - Engine oils -Smoke test procedure

(U.S.) Ford Automotive Standards

FORD FLTM BV 130-1-2000 SEALER FUME TEST - EFFECT OF SEALER FUMES ON PAINT ADHESION

American Society for Testing and Materials (ASTM)

ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D209-81(2019) Standard Specification for Lampblack Pigment
ASTM D209-81(2023) Standard Specification for Lampblack Pigment
ASTM D483-04(2009)e1 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
ASTM D2500-09 Standard Test Method for Cloud Point of Petroleum Products
ASTM D483-04(2018) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
ASTM B117-11 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D7538-09(2018) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
ASTM D7538-09 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D4049-16 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D4049-06(2011) Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D6957-12(2018) Standard Practice for Measuring Curl in Paint Brush Filling Material
ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1322-14a Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D1322-23 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM E3087-18 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
ASTM D1322-19 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D1322-24 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D1322-14 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D1322-15e1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D1322-18 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D1322-97 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

SCC

MIL MIL-P-51062B-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4 (SUPERSEDING MIL-P-51062A)
CAN/ULC-S531-2014(R2018) Standard for Smoke Alarms
CAN/ULC-S531:2019 Standard for Smoke Alarms
CAN/ULC-S531-2002 Standard For Smoke-Alarms
CAN/ULC-S531-M87-1987 Standard smoke alarms
CAN/ULC-S531-2014(C2018) Smoke Alarm Standard
MIL MIL-P-0051062D-1987 PUMP, FOG OIL, SMOKE GENERATOR, M4 (SUPERSEDING MIL-P-0051062C) (NO S/S DOCUMENT)
CAN/ULC-S102.4-2007 STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING AND CABLES
CAN/ULC-S553-M86-1986 Standard for the Installation of Smoke-Alarms
CAN/ULC S553-2002 Standard for the Installation of Smoke Alarms
CAN/ULC S102.4-2007 Standard Method of Test for Fire and Smoke Characteristics of Electrical Wiring and Cables
CAN/ULC-S553-2002 Standard for the Installation of Smoke Alarms
HOLDEN HN 1220-2001 Oil - Hypoid Gear
HOLDEN HN 1181-2001 Oil - Hypoid Gear
HOLDEN HN 1881-2009 OIL – HYPOID GEAR
CAN/CGSB 51.71-1995 Fumes Test: Method for determining the risk of fumes from venting furnaces, water heaters and fuel-burning fireplaces under the influence of vacuum
AS 3543 SUPP 1:1989 Use of standard Ringelmann and Australian Standard miniature smoke charts - Australian Standard miniature smoke chart (Supplement to AS 3543-1989)
ULC 531-2019 Standard for Smoke Alarms (CAN/ULC S531:2019)
05/30065465 DC ISO 23556. Filter performance test standard for diesel engines. Soot removal in lubricating oil
AS K41.402.1:1957 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 402.1: Bend test
CAN/ULC-S552-2002 Standard for the Maintenance and Testing of Smoke Alarms
AS K41.402.1:1963 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 402.1: Bend test
CAN/ULC S552-2002 Standard for Maintenance and Testing of Smoke Alarms
DIN 51532 E:2011 Draft Document - Petroleum waxes - Determination of melting point (cooling curve)
HOLDEN HN 1967-2009 OIL – HYPOID GEAR, 80W/90
VDI 6019 BLATT 1-2006 Engineering methods for the design of smoke extraction from buildings — fire progression, verification of effectiveness
CAN/ULC-S529-M87-1987 Standard for Smoke Detectors for Fire Alarm Systems
CAN/ULC-S102.4-2010 Standard Method of Test for Fire and Smoke Characteristics of Electrical Wiring, Cables and Non-Metallic Raceways
CAN/ULC-S529-2002 Standard For Smoke Detectors For Fire Alarm Systems
ULC 553-2014 Standard for the Installation of Smoke Alarms (CAN/ULC S553-14)
CAN/ULC-S102.4:2017(R2022) STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS
ULC 102.4-2017 Standard Method of Test for Fire and Smoke Characteristics of Electrical Wiring, Cables and Non-Metallic Raceways
DIN SPEC 91343:2017 Characterization of paint sprays - Characterization of the droplet size and velocity in (lacquer) paint sprays; Text in German and English

PL-PKN

PN A99007-04-1987 Cigarettes Chemical studies on cigarette smoke Determination of tar
PN A99007-01-1987 Cigarettes Chemical studies on cigarettes smoke General statement and scope of the standard
PN C04001-1967 Petroleum Determination of curve of the veritabies boilings tempera?ures and of curves of the physicols and chemicals properties

Japanese Industrial Standards Committee (JISC)

JIS K 2537:2000 Petroleum products -- Kerosine and aviation turbine fuels -- Determination of smoke point

National Fire Protection Association (NFPA)

NFPA 92H-2012 Standard for Smoke Control Systems

GM North America

GM GM9828P-1997 Smoke Causing Emissions from Paint and Sealers
GM 9986226-2003 Friction Modified Fuel Efficient Hypoid Gear Lubricant
GM 9986115-2003 Oil - Axle Lubricant, Fuel-Efficient Hypoid Revision A

American National Standards Institute （ANSI)

ANSI/NFPA 92-2011 Standard for Smoke Management Systems
ANSI E1.29-2009 Product Safety Standard for Theatrical Fog Generators that Create Aerosols of Water, Aqueous Solutions of Glycol or Glycerin, or Aerosols of Highly Refined Alkane Mineral Oil
ANSI/ASTM D1322:2012 Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ANSI/ASTM D1322:2015 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
BS EN IEC 61591:2023 Cooking fume extractors. Methods for measuring performance (British Standard)

CZ-CSN

CSN 65 6643-1980 Minerál oils. Hypoid gears oil
CSN 65 6642-1990 Minerál oils. Hypoid gears oil
CSN 56 0280 Cast.7-1989 Methods of test for fermented tobac- o and tobacco products. etermination of crude and dry moke condensate
CSN 58 8775 Z1-1998 Grease test methods. Fat curve measurement
CSN 58 8775-1994 Methods of test for fats and oils Determination of cooling curve

Society of Automotive Engineers (SAE)

SAE AS8048A-2021 Performance Standard for Passenger Smoke and Toxic Fumes Respiratory Protective Equipment
SAE AS8048-2018 Performance Standard for Passenger Smoke and Toxic Fumes Respiratory Protective Equipment
SAE J1260-2019 Standard Oil Filter Test Oil
SAE J1260-2012 Standard Oil Filter Test Oil
SAE J1260-2007 Standard Oil Filter Test Oil

Military Standards (MIL-STD)

DOD A-A-51937 A-1994 NITROGLYCERIN LINGUAL AEROSOL [Use In Lieu Of: DOD A-A-0051937]

GM Europe

GME L-6-22-2000 COP Diesel Smoke (English/German; includes Appendix A)

Korean Agency for Technology and Standards (KATS)

KS C IEC 61591-2015(2020) Household range hoods and other cooking fume extractors — Methods for measuring performance
KS M 2740-1-2005(2020) Petroleum waxes－Determination of melting point(cooling curve)
KS M 2740-1-2020 Petroleum waxes－Determination of melting point(cooling curve)
KS M ISO 3014-2022 Petroleum products－Determination of the smoke point of kerosine
KS M ISO 3014-2012(2022) Petroleum products－Determination of the smoke point of kerosine
KS M ISO 3014-2012(2017) Petroleum products－Determination of the smoke point of kerosine

BE-NBN

NBN T 52-067-1978 Petroleum waxes - Determination of melting point (cooling curve)

GSO

GSO ISO 17132:2013 Paints and varnishes - T-bend test
GSO ASTM D6200:2016 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
BH GSO ASTM D6200:2017 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
OS GSO ASTM D6200:2016 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
GSO ASTM D1322:2021 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
GSO 560:2011 Method of testing crude oil and petroleum products – Standard test method for cloud point of petroleum oils
GSO ISO 3014:2008 Petroleum products - Determination of the smoke point of kerosine
BH GSO ASTM D1322:2022 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
OS GSO ISO 3014:2008 Petroleum products - Determination of the smoke point of kerosine

API - American Petroleum Institute

API BULL 11L4-1970 Curves for Selecting Beam Pumping Units
API 4217-1974 FOUNDATION FOR MODELING NOx AND SMOKE FORMATION IN DIESEL FLAMES
API 4267-1975 THE PHOTOCHEMICAL SMOG REACTIVITY OF DIESEL EXHAUST ORGANICS TO CORRDINATING RESEARCH COUNCIL

International Organization for Standardization (ISO)

ISO 3308:1986 Cigarettes; Routine analytical cigarette-smoking machine; Definitions and standard conditions

Underwriters Laboratories (UL)

UL 268A-2020 Standard for Smoke Detectors for Duct Application
UL 268A-2023 Standard for Smoke Detectors for Duct Application
UL 217-2015 UL Standard for Safety Smoke Alarms (Eighth Edition; Reprint with Revisions Through and Including November 23@ 2016)
UL 217-2016 UL Standard for Safety Smoke Alarms (Eighth Edition; Reprint with Revisions Through and Including November 23@ 2016)

Institute of Electrical and Electronics Engineers (IEEE)

NFPA (Fire) 92 Standard for Smoke Control Systems, 2021 Edition
NFPA (Fire) 92HB12 Standard for Smoke Control Systems Handbook, 2012 Edition

GOST

GOST 30571-2022 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

ISUZU - Isuzu Motors Ltd.

ISC-C71-003B-2017 Hypoid gear lubricant

Association Francaise de Normalisation

NF V37-013:1992 ROUTINE ANALYTICAL CIGARETTE-SMOKING MACHINE. DEFINITIONS AND STANDARD CONDITIONS.
NF V37-032*NF ISO 8454:2007 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method.
NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.