Motor load torque calculation method

Motor load torque calculation method, Total:108 items.

The international standard classification for "Motor load torque calculation method" includes: Textile machinery , Construction equipment , Earth-moving machinery , Buses , Keys and keyways, splines , Hulls and their structure elements , Agricultural tractors and trailed vehicles .

The Chinese standard classification for "Motor load torque calculation method" includes: Technical management , Textile machinery and apparatus in general , Architectural engineering construction machinery , Basic standards and general methods , Bus , Chain drive, belt drive and key joint , Transmission system .

Professional Standard - Aviation

HB 5873-1985 Model nomenclature of airborne electronic computer

Professional Standard - Petrochemical Industry

SH/T 3116-2000 Calculation Method for Electricity Load Design in Petroleum Refin
SH/T 3116-2017 Technical specification for assemble inernal floating roofs of storage tank in petrochemical industry

Professional Standard - Textile

FZ/T 90042.4-1992 Synchronous belt drive for textile machinery - design calculation for high torque synchronous belt drive

Group Standards of the People's Republic of China

T/GXMES 005-2023 Hydraulic rock drill rotary torque test method strain method
T/CCMA 0157-2023 Torque test methods for rotary drive of rotary drilling rigs

Professional Standard - Railway

TB/T 2797-1997 Calculation Condition and Method for Negative Sequence Current of Electrified Railway

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 12428-1990 Calculation Method of Loading Mass of Passenger Cars
GB/T 12428-2005 Laden mass calculating method for buses
GB/T 12428-1990 laden mass calculation of buses
GB/T 17855-1999 Calculation of load capacity of spline
GB/T 12428-2023 Laden mass calculating method for bus
GB/T 10175.1-2008 Earth moving machinery - Loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load

Professional Standard-Ships

CB/Z 815-2019 Calculation method of wind load on ship
CB/Z 263-1997 The design calculating method of storage battery loading hatchway for submarine

Professional Standard - Machinery

JB/T 10181.11-2014 Electric Cables - Calculation of the Current Rating - Part 11: Current Rating Equations (100% Load Factor) and Calculation of Losses - General
JB/T 9837-1999 Calculation methods of lad capacity of cylindrical gears for tractors

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 17855-2017 Calculation of load capacity of spline

GOST

GOST R IEC 60287-1-1-2022 Electric cables. Calculation of the current rating. Part 1-1. Methods for calculating the rated current load (100% load factor) and losses. General
GOST 34869-2022 Spherical plain bearings. Method for the calculation of static and dynamic load ratings

Defense Logistics Agency

DLA MIL-C-6092 A-1960 COMPUTER, AIRCRAFT LOAD BALANCING
DLA MIL-C-6092 A NOTICE 1-1998 COMPUTER, AIRCRAFT LOAD BALANCING
DLA MIL-C-6092 A VALID NOTICE 2-2005 COMPUTER, AIRCRAFT LOAD BALANCING

German Institute for Standardization

DIN EN 12831 Bb.2:2012 Heating systems in buildings - Method for calculation of the design heat load - Supplement 2: Simplified method for calculation of the design heat load and the heat generator capacity
DIN EN 12831 Bb.3:2016 Heating systems in buildings - Method for calculation of the design heat load; Supplement 3: Simplified method for calculation of the heat load of rooms

PL-PKN

PN M06514-1986 Lifting devices Loads in the calculations of crane struktures

SCC

UNE 115454-1:2004 Earth-moving machinery. Loaders and backhoe loaders. Part 1: Calculation of rated operating capacity and test method for verifiying calculated tipping load.
MIL MIL-C-6092A-1960 COMPUTER, AIRCRAFT LOAD BALANCING (SUPERSEDING MIL-C-6092)
BS 7769-1.1:1997 Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses-General
BS IEC 60287-1-1:2006 Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General
IEC 60287:1969 Calculation of the continuous current rating of cables (100 % load factor)
DIN 3996 E:2018 Draft Document - Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes
DANSK DS/IEC 60287-1-1:2023 Electric cables – Calculation of the current rating – Part 1-1: Current rating equations (100 % load factor) and calculation of losses – General
BS ISO 14397-1:2002 Earth-moving machinery. Loaders and backhoe loaders-Calculation of rated operating capacity and test method for verifying calculated tipping load
CEI IEC 60287-1-1/A1:2018 Electric cables - Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC 60287-1-1:1994+AMD1:1995+AMD2:2001 CSV Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
DIN EN 12831 Supplement 3 E:2014 Draft Document - Heating systems in buildings - Method for calculation of the design heat load - Supplement 3: Simplified method for calculation of the heat load of rooms
IEC 60287:1969/AMD1:1971 Amendment 1 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287:1969/AMD3:1977 Amendment 3 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287:1969/AMD2:1974 Amendment 2 - Calculation of the continuous current rating of cables (100 % load factor)
NS-EN 12831:2003 Heating systems in buildings — Method for calculation of the design heat load
IEC 60287:1982/AMD2:1991 Amendment 2 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287:1982/AMD1:1988 Amendment 1 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287:1969/AMD4:1978 Amendment 4 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287:1982/AMD3:1993 Amendment 3 - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287A:1978 First supplement - Calculation of the continuous current rating of cables (100 % load factor)
IEC 60287-1-1:1994/AMD2:2001 Amendment 2 - Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General
IEC 60287-1-1:1994/AMD1:1995 Amendment 1 - Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General

Korean Agency for Technology and Standards (KATS)

KS B 2020-2001 Static load ratings for rolling bearings
KS B 2019-2001 Methods of evaluating dynamic load ratings for rolling bearings
KS B ISO 14397-1:2015 Earth-moving machinery－Loaders and backhoe loaders－Part 1：Calculation of rated operating capacity and test method for verifying calculated tipping load
KS C IEC 60287-1-1:2020 Electric cables — Calculation of the current rating —Part 1-1: Current rating equations(100 % load factor) and calculation of losses — General
KS B ISO 14397-1:2005 Earth-moving machinery-Loaders and backhoe loaders-Part 1:Calculation of rated operating capacity and test method for verifying calculated tipping load
KS B ISO 10300-2:2004 Calculation of load capacity of belvel gears－Part 2：Calculation of surface durability(pitting)
KS B ISO 14397-1-2020 Earth-moving machinery－Loaders and backhoe loaders－Part 1：Calculation of rated operating capacity and test method for verifying calculated tipping load
KS B ISO 14397-1-2015(2020) Earth-moving machinery－Loaders and backhoe loaders－Part 1：Calculation of rated operating capacity and test method for verifying calculated tipping load

AGMA - American Gear Manufacturers Association

90FTM2-1990 An Industrial Approach for Load Capacity Calculation of Worm Gears (Verifying and Design)
12FTM05-2012 Combined Effects of Gravity@ Bending Moment@ Bearing Clearance@ and Input Torque on Wind Turbine Planetary Gear Load Sharing

British Standards Institution (BSI)

BS IEC 60287-1-1:2007 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General
BS IEC 60287-1-1:2023 Electric cables. Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses. General
PD ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears. Calculation of scuffing load capacity. Flash temperature method
BS IEC 60287-1-1:2006+A1:2014 Electric cables — Calculation of the current rating — Part 1 - 1 : Current rating equations (100 % load factor) and calculation of losses — General
BS ISO 14397-1:2007+A1:2019 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-1:2007 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears. Part 21: Calculation of scuffing load capacity — Integral temperature method
BS IEC 60287-1-3:2023 Electric cables. Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
BS ISO 23886:2021 Aerospace. Collar, threaded, self-locking. Test method for torque and preload

Association Francaise de Normalisation

NF P52-612:2004 Heating systems in buildings - Method for calculation of the design heat load.
XP ISO/TS 6336-20:2022 Calculation of the load capacity of straight and helical spur gears - Part 20: Calculation of the galling load capacity - Flash temperature method
NF E25-035-2:2020 Bolted joints - Part 2 : prevailing torque stainless steel nuts - Functional properties, test methods for torque/clamp force and prevailing torques and proof load
NF E25-035-2/A1:2021 Bolted joints - Part 2 : prevailing torque stainless steel nuts - Functional properties, test methods for torque/clamp force and prevailing torques and proof load
XP ISO TS 6336-21:2022 Calculation of the load capacity of straight and helical spur gears - Part 21: Calculation of scuffing load capacity - Integral temperature method
NF ISO 14397-1:2007 Earth-moving machinery - Loaders and backhoe loaders - Part 1: calculation of the rated payload and test method to verify the calculated tipping load
NF E22-057-1:2012 Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 1 : general.
NF ISO 14397-1/A1:2020 Earth-moving machinery - Loaders and backhoe loaders - Part 1: calculation of the rated payload and test method to verify the calculated tipping load - Amendment 1
XP E22-396*XP ISO/TS 16281:2008 Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings
NF E58-080-1*NF ISO 14397-1:2007 Earth-moving machinery - Loaders and backhoe loaders - Part 1 : calculation of rated operating capacity and test method for verifying calculated tipping load

CZ-CSN

CSN 35 8071 Cast.5-1986 Variable resistors. Operating torque and switch torque. Methods of measurements
CSN 36 9307-1982 Electronic Computers Method of tests.

GSO

GSO IEC 60287-1-1:2014 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
BH GSO IEC 60287-1-1:2015 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
OS GSO ISO 14397-1:2013 Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
GSO ISO 14397-1:2013 Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
GSO ISO 9043:2013 Mopeds -- Measurement method for moments of inertia

GB-REG

REG NASA-LLIS-1125--1999 Lessons Learned ?Computer Hardware-Software/Space Shuttle/I-Loads

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3638-1993 CLTD/SCL/CLF Cooling Load Calculation Method
ASHRAE SE-99-1-1999 Symposium on New Load Calculation Methods and Data

International Electrotechnical Commission (IEC)

IEC 60287-1-1:2006 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC 60287-1-1:2001 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General
IEC 60287-1-1:2014 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC 60287-1-1:2006+AMD1:2014 CSV Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC 60287-1-1:2023 CMV Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC 60287-1-1:2006/AMD1:2014 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

IX-IX-IEC

IEC 60287-1-1:2023 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

YU-JUS

JUS N.R4.447-1978 Electromechanical components for electronic equipment. Test 13d: operating torque
JUS N.R4.447-1991 Electromechanicalcomponents for electronic eguipment. Test 13d: Operating torgue (switches)

International Organization for Standardization (ISO)

ISO 14397-1:2007 Earth-moving machinery - Loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
ISO 14397-1:2002 Earth-moving machinery - Loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress
ISO 14397-1:2007/Amd 1:2019 Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load — Amendment 1
ISO 23886:2021 Aerospace - Collar, threaded, self-locking - Test method for torque and preload

KR-KS

KS C IEC 60287-1-1-2020 Electric cables — Calculation of the current rating —Part 1-1: Current rating equations(100 % load factor) and calculation of losses — General

ESDU - Engineering Sciences Data Unit

ESDU 95010 B-1997 COMPUTER PROGRAM FOR ESTIMATION OF SPANWISE LOADING OF WINGS WITH CAMBER AND TWIST IN SUBSONIC ATTACHED FLOW
ESDU 83040 D-2013 Method for the rapid estimation of spanwise loading of wings with camber and twist in subsonic attached flow

AENOR

UNE-ISO 14397-1:2008 Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load

Standard Association of Australia （SAA）

AS ISO 14397.1:2021 Earth-moving machinery — Loaders and backhoe loaders, Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load

CU-NC

NC 53-41-1990 Construction Designs Wind Pressure Loads Calculating Method

AT-ON

ONORM B 5012-2-1995 Structural design of buried water and sewerage pipelines for housing and industry - Load assumptions, method of calculation

Others: