Biochemical instrument calibration method

Biochemical instrument calibration method, Total:487 items.

The international standard classification for "Biochemical instrument calibration method" includes: Geology. Meteorology. Hydrology , Cosmetics. Toiletries , Farming and forestry in general , Aircraft and space vehicles in general , Rubber , Industrial process measurement and control , Starch and derived products , Solid fuels , Coals , Mechanical testing , food products in general , Testing of metals , Cereals, pulses and derived products , Water quality , Laboratory medicine , Exploratory and extraction equipment , Occupational safety. Industrial hygiene , Electrical wires and cables , Metrology and measurement in general , Precision mechanics , Environmental management , Environment and environmental protection in general , Copper and copper alloys , Chemical analysis .

The Chinese standard classification for "Biochemical instrument calibration method" includes: Electric power testing technique , Chemical Measurement , Hydrology and water conservancy instrument , Environmental sanitation , Plant quarantine, pest control , Spacecraft telemetering and remote sensing system , Rubber products in general , Industrial automation and control device in general , Basic standards and general methods , Coal analysis methods , Computer application , Physics and Mechanics , Food sanitation , Semimetal and semiconductor material analysis method , Cereal crop and product , Medical laboratory equipment , Petroleum drilling & production equipment and instrument , Labor sanitation , Wire with insulation layer , Monitoring instrument , Analysis methods for toxic substances in water , Basic standards and general methods on chemical fertilizers , Basic standards and general methods for water treatment agent , Oceanographic instrumentation , Petrochemical and chemical industry engineering , Basic standards and general methods , Basic standards and general method , Heavy metals and their alloys analysis method , Standardization and Quality Management , Basic standards and general methods .

Professional Standard - Electricity

DL/T 1002-2006 Calibration for low-level dissolved oxygen meter -- Standard gases calibration
DL/T 1002-2022 Calibration method of low concentration dissolved oxygen meter

National Metrological Verification Regulations of the People's Republic of China

JJG 464-2011 Semiautomatic Clinical Chemistry Analyzers
JJG 464-1996 Verification Regulation of Ceinical Chemistry Analyzer
JJG(核工) 10-1991 Verification method for measuring point gamma ray source by standard grade germanium gamma spectrometer
JJG 801-1993 Chemiluminescent No/NOX Analyzer
JJG 824-1993 Biochemical Oxygen Demand (BOD5) Meter

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1008-2014 Main Blood Biochemical Indexes and Determination Methods of Tan Sheep
DB64/T 884-2013 Main Blood Biochemical Indexes and Determination Methods of Holstein Dairy Cows

Group Standards of the People's Republic of China

T/CSTM 00277.1-2020 Evaluation of long-term stability for chemicalanalytical instruments- Part 1: Evaluation based on standard method
T/HNNMIA 61-2023 Alumina production - Spherical sodium oxalate - Chemical analysis methods - Determination of aluminum hydroxide content - EDTA titration method
T/CAFFCI 46-2021 Qualitative Detection of microorganisms in cosmetics Amplified ATP bioluminescence method
T/HEBQIA 280-2024 AS series fully automatic biochemical analyzers
T/HBJLXH 003-2022 Calibration Method of Free calcium oxide analyzer
T/QGCML 1082-2023 Inspection methods for physical and chemical indicators of mature vinegar production process
T/CSES 43-2021 Technical specifications for online monitoring equipment of Biochemical Oxygen Demand based on in situ biofilm
T/CMA 031-2021 Calibration method for basic nitrogen meters
T/CIPR 122-2023 Method for measuring the performance of gas purification devices in pig farms
T/FDCA 004-2020 Cosmetics—Determination of viscosity—Rotational rheometer method
T/QAS 053-2021 TOC Meter Method for Determination of Chemical Oxygen Demand in High Chlorine Wastewater

Military Standard of the People's Republic of China-General Armament Department

GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 4036-2000 Radiation calibration method for infrared channels of spaceborne remote sensing instruments
GJB 6296-2008 Calibration methods for tropospherie wind profiler
GJB 570.14-1988 Typical test methods for meteorological instruments Radiosonde
GJB 5291-2004 Digital Weather Radar Calibration Method
GJB 383.19A-1997 Telemetry system and sub-system testing methods Tape recorder tape speed changes and timing error testing methods
GJB 1180-1991 Final test method for anti-aircraft gun commander
GJB 337-1987 Determination method of nitrogen content of nitrocellulose (interferometer method)
GJB 1758-1993 Calibration methods for military meteorological instruments

水利部

SL/T 124-2014 Calibration method of cement hydration heat meter

Professional Standard - Water Conservancy

SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
SL 124-1995 Ccalibration method for cement hydration heat (direct method) tester
SL 144.3-2008 calibration methods of water environmental detecting instrument and equipment calibration method of biochemical insubator

未注明发布机构

VDI 3957 Blatt-3 E:2022-04 Biological measuring techniques for the determi- nation and evaluation of effects of air pollutants on plants (biomonitoring) – Method of the stand- ardised exposure of curly kale
DIN EN 14602:2005 Footwear - Test methods for the assessment of ecological criteria
ASTM RR-D08-1017 2014 D0036/D0036M-Standard Test Method for Softening Point of Bitumen (Ring and Ball Apparatus)
ASTM RR-D01-1113 1999 E0028-Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM RR-D02-1003 1970 D0056- Test Method for Flash Point by Tag Closed Cup Tester
ASTM RR-D01-1054 1988 D1316- Test Method for Fineness of Grindof Printing Inks by the Production Grindometer
ASTM RR-D04-0203 1958 E0028- Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7917.2-1987 Standard methods of hygienic test for cosmetics; Arsenic
GB/T 12094-1989 Method for determination of sulfur dioxide content in starches and derived products
GB/T 11941-1989 standard methods for hygienic examination of sulfide in drinking water sources-Gas chromatography
GB/T 28469.2-2012 Electromagnetic and inductive digital instrument—Part 2:Methods of evaluating the performance
GB/T 13939-2014 Rubber,vulcanized-Test method of deterioration by heat and oxygen-Tube tester
GB/T 5750.12-2006 Standard examination methods for drinking water - Microbiological parameters
GB/T 29247-2012 General methods for testing the performance of industrial process measurement and control instruments
GB/T 7918.2-1987 Standard methods of microbiological examination for cosmetics--Standard plate count
GB/T 7917.2-1987 Standard methods of hygienic test for cosmetics--Arsenic
GB/T 5009.77-2003 Method for analysis of hygienic standard of edible hydrogenated oil
GB 7918.4-1987 Standard methods of microbiological examination for cosmetics; Pseudomonas aeruginosa
GB/T 7917.3-1987 Standard methods for hygienic test for cosmetics--Lead
GB/T 12093-1989 Method for determination of chloride content in starches and derived products
GB/T 14490-1993 Method for determination of cereal and starch gelatinization properties using a viscograph
GB 7918.5-1987 Standard methods of microbiological examination for cosmetics; Staphylococcus aureus
GB/T 16415-2008 Determination of selenium in coal - Hydride generation-atomic absorption method
GB/T 32277-2015 Test method for instrumental neutron activation analysis (INAA) of silicon
GB/T 29582-2013 Detection and identification of peanut stunt virus
GB 7917.4-1987 Standard Method of Hygienic Test for Cosmetics - Methanol
GB 7918.3-1987 Standard methods of microbiological examination for cosmetics; Fecal coliforms
GB/T 16415-1996 Determination of selenium in coal-Hydride generation-atomic absorption method
GB/T 7918.3-1987 Standard methods of microbiological examination for cosmetics--Fecal coliforms
GB/T 42647-2023 In-orbit field calibration method for spaceborne laser altimeter
GB 7918.1-1987 Standard methods of microbiological examination for cosmetics; General rules
GB 7917.1-1987 Standard methods of hygienic test for cosmetics; Mercury
GB/T 22458-2008 General rules of instrumented nanoindentation test
GB 7918.2-1987 Standard methods of microbiological examination for cosmetics; Standard plate count
GB/T 13939-1992 vulcanized - Test method of heat and oxygen - Tube tester aging method
GB/T 7917.4-1987 Standard methods of Hygienic test for cosmetics--Methanol
GB 7917.3-1987 Standard methods for hygienic test for cosmetics; Lead
GB/T 12089-1989 Method for determination of sulphated ash in starches and derived products
GB/T 16980.1-1997 Industrial automation—Shop floor production—Part 1: Reference model for STANDARDization and a methdology for identification of requirements

Professional Standard - Medicine

YY/T 1549-2024 Calibrator for biochemical analyzer
YY 0014-1990 Biochemical analyzer
YY 91060-1999 Vocabulary of biochemical instruments. UV-VIS spectrophotometry
YY/T 0654-2008 Automatic chemistry analyzer
YY/T 0014-2005 Semiautomatic biochemistry analyzer

中华人民共和国国家卫生和计划生育委员会

GB 11941-1989 Standard method for hygienic examination of sulfide in raw water
GB/T 7918.4-1987 Standard methods of microbiological examination for cosmetics--Pseudomonas aeruginosa
GB/T 7918.1-1987 Standard methods of microbiological examination for cosmetics--General rules
GB/T 7918.5-1987 Standard methods of microbiological examination for cosmetics--Staphylococcus aureus
GB/T 7917.1-1987 Standard methods of hygienic test for cosmetics--Mercury

Professional Standard - Petroleum

SY/T 5258-1991 Chromatography-mass spectrometry identification method for biomarkers
SY/T 6532-2002 The calibration method for induced polarization instrument
SY 6532-2002 Calibration method of induced polarimeter

Occupational Health Standard of the People's Republic of China

GBZ/T 210.4-2008 Guide for establishing occupational health standards—Part 4:Determination methods of air chemicals in workplace
GBZ/T 210.5-2008 Guide for establishing occupational health standards—Part 5:Determination methods of chemicals in biological materials

Professional Standard - Machinery

JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire Part8:Cut-through tester
JB/T 9253-1999 Industrial process measurement and control instrument Description for design of scales
JB/T 7388-1994 Evaluation Method of Local Control Device
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester

Professional Standard - Speciality

ZB Q15002-1989 The method of assessing the grade of sintered ordinary bricks by rebound tester

National Metrological Technical Specifications of the People's Republic of China

JJF 2036-2023 Calibration Specification for Dry Biochemistry Analyzers
JJF(电子) 33-1982 Verification method of XB7 standard signal generator
JJF(纺织) 05A-1985 Verification method of Y412A raw cotton moisture meter
JJF(电子) 09-1982 Verification method of XG-2 standard signal generator
JJF(纺织) 05-1985 Verification method of Y412 raw cotton moisture meter
JJF(纺织) 06-1985 Verification method of Y ₂ -I type yarn moisture meter
JJF(纺织) 13-1985 Verification method of Y531 fabric thickness meter
JJF(纺织) 025-1989 Verification method of socks horizontal puller
JJF(航空) 042-1988 Verification method of tool theodolite
JJF(航空) 040-1988 Calibration method of thermoelectric comparator

Professional Standard - Coal

MT/T 622-1996 Simple Determination Method of Five-day Biochemical Oxygen Demand (BOD5)

国家食品药品监督管理局

YY/T 0654-2017 Automatic chemistry analyzer

Professional Standard - Commodity Inspection

SN/T 3005-2011 Test Method for Instrumental Determination of Carbon
SN/T 0736.11-2002 Chemical analysis of fertilizers for import and export - Determination of nitrogen content by auto analyzer

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37906-2019 Reclaimed water quality—Determination of mercury—Mercury analyzer method

Professional Standard - Nuclear Industry

EJ/T 520-1990 Bio-chemiluminescence tester

Jilin Provincial Standard of the People's Republic of China

DB22/T 1979-2013 Determination of Mercury in Cosmetics Automatic Mercury Meter Method
DB22/T 2285-2015 Yield Identification Method of Peanut Varieties Photosynthetic Index Method

Professional Standard - Textile

FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

中国轻工总会

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

国家药监局

YY/T 1662-2019 Quality control material for clinical chemistry analyzer

Professional Standard - Ocean

HY/Z 001-1988 Product standardization checking rules for oceanographic instruments
HY/T 097-2007 Test method of in-situ sulfide analyzer

Professional Standard - Petrochemical Industry

SH/T 5000-2011 The Calculation Method of CO2 Emissions in Petrochemical Production
SH 3044-1992 Seismic Appraisal Standard for Petrochemical Precision Instruments
SH/T 3044-2004 Standard of aseismic evaluation for precision instrument in petrochemical industry
SH/T 1833-2022 Determination of color difference for raw synthetic rubber—Colorimeter method

Professional Standard - Electron

SJ/T 11442-2012 Evaluation method of work safety standardization for electronic information enterprises

工业和信息化部

YS/T 1171.6-2017 Methods for chemical analysis of regenerated zinc material一Part 6:Determination of iron content-Na2EDTA titrimetric method
YS/T 1179.3-2017 Chemical analysis methods of aluminum slag-Part 3:Determination of carbon，nitrogen-Element analysis method
YS/T 1171.1-2017 Methods for chemical analysis of regenerated zinc material-Part 1:Determination of zinc content-Na2EDTA titrimetric method
YS/T 1171.10-2017 Methods for chemical analysis of regenerated zinc material一Part 10:Determination of zinc oxide content-Na2EDTA titrimetric method

Hunan Provincial Standard of the People's Republic of China

DB43/T 2129-2021 Test method for trace carbon residual detector

Professional Standard - Non-ferrous Metal

YS/T 521.3-2009 Methods for chemical analysis of blister copper—Part 3:Determination of arsenic content—Hydride generation-atomic fluorescence spectrometric method—Potassium bromate titration
YS/T 801-2012 Measuring and Calculating Methods for Perfluorocarbon Emissions Resulting from a Group of Cells

Professional Standard - Urban Construction

CJ 26.4-1991 Municipal sewage water quality inspection method standard Five-day determination of biochemical oxygen demand Dilution and inoculation method

Professional Standard - Agriculture

309药典三部-2020 Bioassay 3429 Immunochemistry
GB/T 1.4-1988 Directives for the work of standardization--Rules for drafting chemical analysis standards
GB/T 43859-2024 Test method for performance of water activity meters

Henan Provincial Standard of the People's Republic of China

DB41/T 1581-2018 Cosmetic Hygienic Chemical Examination Method Copper

Professional Standard - Light Industry

QB/T 5837-2023 Micrometer for tissue paper

Professional Standard - Geology

DZ/T 0137-1994 Compiling specifications for the comprehensive requirements of geological instrument standardization
DZ/T 0136-1994 Compiling specifications for the review report on geological instrument standardization

国家能源局

NB/SH/T 0990-2019 Determination of residue in asphalt emulsions by moisture analyzer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35158-2017 Verification method for Auger electron spectrometers

American Society for Testing and Materials (ASTM)

ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen &40;Ring-and-Ball Apparatus&41;
ASTM D36/D36M-14 Standard Test Method for Softening Point of Bitumen 40;Ring-and-Ball Apparatus41;
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D36-06 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D6493-99 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM D2084-11 Standard Test Method for Rubber Propertymdash;Vulcanization Using Oscillating Disk Cure Meter
ASTM D6493-05 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM D6493-05(2010) Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-19 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer
ASTM E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM E1821-08(2020) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM D6746-03 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D2084-17 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-19a Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-11(2016) Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-19 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D5289-07 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM D6746-02 Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D5289-17 Standard Test Method for Rubber Property&x2014Vulcanization Using Rotorless Cure Meters
ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D5289-07a Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D6746-02a Standard Test Method for Raw Rubber or Unvulcanized Compounds8212;Determination of Tensile Green Strength
ASTM D56-93 Standard Test Method for Flash Point by Tag Closed Tester
ASTM E2298-13a Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E1821-24 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM D56-87 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D2084-01 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-07 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D4606-21 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM E2298-09 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D4606-15 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D4606-03(2007) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D4606-03 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM E1821-08(2015) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1821-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E837-01e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-08 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-99 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E1821-08 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E837-13 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM E1821-96 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1758-24 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E1758-95e1 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E556/E556M-11(2015) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E1821-01 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E28-99 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E1758-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM D8094-21 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
ASTM E28-99(2004) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM D6493-11(2022) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM D8094-20 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM E3351-22 Standard Test Method for Detection of Nitric Oxide Production In Vitro
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E837-13a Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E1758-01(2015) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D7528-09 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM E1758-01(2020) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D4019-94a Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide
ASTM E1758-01 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D5289-12 Standard Test Method for Rubber Propertymdash;Vulcanization Using Rotorless Cure Meters
ASTM D4310-10 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
ASTM E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D7528-13 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D6748-02a(2017) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D6166-12(2016) Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM C1344-97(2008) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM A255-10(2018) Standard Test Methods for Determining Hardenability of Steel
ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D6139-11 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
ASTM C1293-08b(2015) Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM D5578-94(1999)e1 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
ASTM D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
ASTM D525-00 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM E1228-09 Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
ASTM D6936-23 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D8378/D8378M-21 Standard Test Method for Potential Expansion of Steel Slag from Hydration Reactions by Autoclave
ASTM E298-68 Standard Methods For Assay Of Organic Peroxides
ASTM D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM A255-20a Standard Test Methods for Determining Hardenability of Steel
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D5660-96 Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium
ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
ASTM D5895-13 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7528-21 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D6166-12(2022) Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D6366-99 Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection
ASTM A255-20 Standard Test Methods for Determining Hardenability of Steel
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D4824-13(2018) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D752-73(1978) Standard test method for bench oxidation of engine oils using ROBO instruments
ASTM D6936-04 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D6936-09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D6746-08 Standard Test Method for Determination of Green Strength of Raw Rubber or Unvulcanized Compounds
ASTM D525-01 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D6746-15(2020) Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D7528-17a Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D7528-17 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D5660-96(2009) Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium
ASTM D750-12(2021) Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E298-17 Standard Test Methods for Assay of Organic Peroxides
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D2574-06(2012) Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
ASTM D4642-04(2010) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4824-94(1999) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM C1428-18(2023) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM D572-04(2015) Standard Test Method for Rubber&x2014Deterioration by Heat and Oxygen
ASTM D1519-95(2014) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM F1089-02 Standard Test Method for Corrosion of Surgical Instruments
ASTM F2055-00 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM E3146-24 Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration
ASTM D2616-96 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D2616-96(2003) Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale

British Standards Institution (BSI)

BS 6068-2.19:1986 Water quality. Physical, chemical and biochemical methods. Method for determination of cyanogen chloride
BS DD 203-1:1991 Industrial automation: shop floor production - Reference model for standardization and a methodology for identification of requirements
BS 6068-2.37:1990 Water quality. Physical, chemical and biochemical methods. Method for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr's method)
BS 6068-2.17:1986(2011) Water quality — Part 2 : Physical, chemical and biochemical methods — Section 2.17 Methods for determination of total cyanide
BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
BS 5738:1980 Methods of test for evaluation of vulcanization characteristics for raw natural rubbers
BS 6068-2.34:1988(2011) Water quality — Part 2 : Physical, chemical and biochemical methods — Section 2.34 Method for the determination of the chemical oxygen demand
BS 6068-2.40:1991 Water quality. Physical, chemical and biochemical methods. Method for the determination of borate by spectrometry using azomethine-H
BS 6068-2.34:1988 Water quality - Physical, chemical and biochemical methods - Method for the determination of the chemical oxygen demand
BS 6068-2.18:1986(2011) Water quality — Part 2 : Physical, chemical and biochemical methods — Section 2.18 Methods for determination of easily liberatable cyanide
BS 6068 Sec.2.34:1988 Water quality. Physical, chemical and biochemical methods. Method for the determination of the chemical oxygen demand
BS 6068-2.17:1986 Water quality - Physical, chemical and biochemical methods - Methods for determination of total cyanide
BS 6068 Sec.2.33:1987 Water quality. Physical, chemical and biochemical methods. Method for the determination of ammonium: automated spectrometric method
BS 6068 Sec.2.17:1986 Water quality. Physical, chemical and biochemical methods. Methods for determination of total cyanide
24/30483227 DC BS ISO 10216 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
BS 6068-2.42:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
BS 6068-2.49:1995 Water quality. Physical, chemical and biochemical methods. Determination of aluminium. Spectrometric method using pyrocatechol violet
BS 6068-2.43:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry
BS 7164 Sec.11.1:1994 Chemical tests for raw and vulcanized rubber. Butadiene. Method for determination of microstructure
BS 7164-28.2:1995 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method
BS 6068-2.36:1989 Water quality. Physical, chemical and biochemical methods. Spectrometric method for the determination of nitrate using sulphosalicylic acid
BS 7164-27.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Photometric method
BS 7164-8:1996 Chemical tests for raw and vulcanized rubber - Method for determination of dirt content of raw natural rubber
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS 6068-2.18:1986 Water quality - Physical, chemical and biochemical methods - Methods for the determination of easily liberatable cyanide
BS ISO 22863-8:2021 Fireworks. Test methods for determination of specific chemical substances. Arsenic content by hydride generation atomic fluorescence spectrometry
DD 203-2:1991 Industrial automation: shop floor production. Application of the reference model for standardization and methodology
BS 7164-14:1996 Chemical tests for raw and vulcanized rubber - Methods for determination of carbon black content
BS 6068-2.33:1987 British Standard Water quality - Part 2. Physical, chemical and biochemical methods - Section 2.33 Method for the determination of ammonium: automated spectrometric method
BS 7164-25:1996 Chemical tests for raw and vulcanized rubber. Method for determination of sulfide sulfur content
BS 4317-21:1999 Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph
BS ISO 33406:2024 Approaches for the production of reference materials with qualitative properties
BS 7164-28.1:1997 Chemical tests for raw and vulcanized rubber - Methods for determination of copper content - Atomic absorption spectrometry
BS DD 203-2:1991 Industrial automation: shop floor production - Application of the reference model for standardization and methodology
BS EN 26777:1993 Water quality. Physical, chemical and biochemical methods. Determination of nitrite: molecular absorption spectrometric method
BS 6068 Sec.2.10:1984 Water quality. Physical, chemical and biochemical methods. Determination of ammonium: potentiometric method
BS 6068-2.44:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry
BS 7164-30.1:1997 Chemical tests for raw and vulcanized rubber - Methods for determination of lead content - Atomic absorption spectrometry
DD 203-2-1991 Industrial automation: shop floor production. Application of the reference model for standardization and methodology
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites

SCC

BS 6438-2:1984 Electrochemical analyzers-Method for specifying performance of pH value analyzers
BS 6438-1:1984 Electrochemical analyzers-Method for specifying performance common to all analyzers
BS 6068-2-2.35:1989 Water quality. Physical, chemical and biochemical methods-Method for the determination of electrical conductivity
BS 6438-3:1986 Electrochemical analyzers-Method for specifying performance of electrolytic conductivity analyzers
CEI 45-35:1997 Standardized test methods of semiconductor X-ray spectrometers
AS 1683.22:1983 Methods of test for rubber, Method 22: Rubber - Determination of vulcanization characteristics using the oscillating disc curemeter
BS 6068-2-2.13:1984 Water quality. Physical, chemical and biochemical methods-Determination of turbidity
BS 6068-2-2.32:1987 Water quality. Physical, chemical and biochemical methods-Method for the determination of permanganate index
ASTM D6476-10 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
BS 6068-2-2.38:1990 Water quality. Physical, chemical and biochemical methods-Methods for the determination of total chromium by atomic absorption spectrometry
BS 1673-10:1977 Methods of test for raw rubber and unvulcanized compounded rubber.-Measurement of prevulcanizing and curing characteristics by means of curemeters
BS 6068-2.20:1986 Water quality. Physical, chemical and biochemical methods-Method for determination of cyanide by diffusion at pH 6
NS-EN 15104:2011 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
SN-CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
BS 7164-14:1990 Chemical tests for raw and vulcanized rubber-Methods for determination of carbon black content
BS 6068-2-2.28:1986 Water quality. Physical, chemical and biochemical methods-Method for the determination of phosphorus: ammonium molybdate spectrometric method
BS 6068-45:1993 Water quality. Physical, chemical and biochemical methodsDetermination of selenium by atomic absorption spectrometry
DIN CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods; German version CEN/TS 15104:2005
BS 6068-2.45:1993 Water quality. Physical, chemical and biochemical methods-Determination of selenium by atomic absorption spectrometry
DANSK DS/CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
UNE-CEN/TS 15104:2008 EX Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DANSK DS/ISO 10216:2011 Anodizing of aluminium and its alloys – Instrumental determination of image clarity of anodic oxidation coatings – Instrumental method
BS 6068-2-2.14:1984 Water quality. Physical, chemical and biochemical methods-Determination of biochemical oxygen demand after 5 days (BOD<sub>5</sub>): dilution and seeding method
AASHTO T 53-2009(2018) Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus) (ASTM Designation: D36-06)
BS 6068-2-2.14:1990 Water quality. Physical, chemical and biochemical methods-Determination of biochemical oxygen demand after 5 days (BOD<sub>5</sub>): dilution and seeding methods
AWWA ACE93179 Instrumental Methods for Meeting Rechlorination Requirements
AS 3580.4.1:1990 Methods for sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide - Direct reading instrumental method
VDI 3957 BLATT 3-2008 Biological measurement methods for determining and assessing the effect of air pollutants on plants (bioindication) — Method of standardized exposure of green cabbage
DIN EN 15104 E:2010 Draft Document - Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods; German version FprEN 15104:2010
AS/NZS 4266.21:1996 Reconstituted wood-based panels - Methods of test, Method 21: Determination of over-cure or under-cure of resin
BS 7164-28-28.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content-Photometric method
BS 7164-26-26.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content-Sodium periodate photometric methods
BS 6068-2-2.15:1986 Water quality. Physical, chemical and biochemical methods-Determination of dissolved oxygen: electrochemical probe method
BS 1428-B3:1964 Microchemical apparatus. Apparatus for the determination of elements by other than combustion methods.-Specification for nitrogen determination apparatus (non-transference micro-Kjeldahl)
BS 7164-6.1:1994 Chemical tests for raw and vulcanized rubber. Methods for determination of volatile matter.-Raw rubber
10/30219384 DC BS EN 15104. Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
BS 6068-2-2.23:1986 Water quality. Physical, chemical and biochemical methods-Method for the determination of anionic surfactants by the methylene blue spectrometric method
UNE 135212:1998 EX ROAD MARKING EQUIPMENT. PAINTS. TEST METHODS. DETERMINATION OF SOLID CONTENT. INSTRUMENTAL METHOD.
BS 7164-25:1990 Chemical tests for raw and vulcanized rubber-Method for determination of sulphide sulphur content
BS 6085:1981 Methods of test for determination of the resistance of textiles to microbiological deterioration
VDI 3957 BLATT 6-2003 Biological measurement methods for determining and assessing the effect of air pollutants on plants (bioindication) — Determination and assessment of the phytotoxic effect of ozone and other photooxidants — Standardized table method...
AASHTO T 217-2002(2010) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AWWA WQTC55114 Instrumental Methods for the Determination of Cyanobacterial Toxins
AS 1766.2.1:1991 Food microbiology, Method 2.1: Examination for specific organisms - Standard plate count
BS 6068-2-2.22:1986 Water quality. Physical, chemical and biochemical methods-Examination and determination of colour
AASHTO T 337-2009(2023) Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
AASHTO TP 122-2016(2020) Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
AASHTO T 217-2014(2022) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
BS 1428-B1:1964 Microchemical analysis. Apparatus for the determination of elements by other than combustion methods-Specification for nitrogen determination apparatus (micro-Kjeldahl)
BS 7164-9:1997 Chemical tests for raw and vulcanized rubber-Method for determination of soap and organic acid in raw styrene-butadiene rubber
BS 1428-B1:1953 Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for nitrogen determination apparatus (micro-Kjeldahl)
AASHTO TP 122-2022 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
AWWA ACE93024 Pricing Methods for Reclaimed Water
BS 7164-8:1990 Chemical tests for raw and vulcanized rubber-Method for determination of dirt content of raw natural rubber
BS 5923-3:1981 Methods for chemical analysis of rubber-Determination of volatile matter content of raw rubbers

Korean Agency for Technology and Standards (KATS)

KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
KS M 6687-1986 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS M 6687-2016 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
KS E ISO 15247:2012 Zinc sulfide concentrates-Determination of silver content-Acid dissolution and flame atomic absorption spectrometric method
KS M 6687-2016(2021) Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS M 6687-2021 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS L 2301-2020 Testing method of glass apparatus for chemical analysis
KS F 2601-2020 Standard test method for floor slipperiness using the O-Y Pull Slip Meter
KS M 6898-2021 Testing method for set in lasting with the dome plasticity apparatus
KS L 2301-2010 Testing method of glass apparatus for chemical analysis
KS L 2301-1978 Testing method of glass apparatus for chemical analysis
KS L 2301-2015 Testing method of glass apparatus for chemical analysis
KS D ISO 10216:2012 Anodizing of aluminium and its alloys-Instrumental determination of image clarity of anodic oxidation coatings-Instrumental method

RU-GOST R

GOST 18136-1972 Oils. Method for determination of oxidation stability in a universal apparatus
GOST 32254-2013 Milk. Instrumental express-method for determination of antibiotics
GOST 8852-1974 Petroleum products. Method of test for coking by apparatus "LKN-70"
GOST 29026-1991 Coal tar pitch. Method for determination of softening on apparatus VUCHIN-KLS
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
GOST 20264.1-1989 Enzyme preparations. Methods for the determination of organoleptic, physico-chemical and microbiological points
GOST 26265-1984 Standardization in the field of service. Basic provisions
GOST 33463.3-2015 Life-support systems for railway rolling stock. Part 3. Test methods for determination of the sanitary-chemical indicators
GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
GOST R 56881-2016 Biomass. Determination of the ash content by standard method
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST R 51274-1999 Vessels and apparatus. Apparatus of column type. Norms and methods of strength calculation
GOST R 56883-2016 Biomass. Determination of bulk density by standard method
GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method
GOST 8.481-1982 State system for ensuring the uniformity of measurements. Roundness measuring instruments. Methods and means for verification
GOST R 8.660-2009 State system for ensuring the uniformity of measurements. Industrial application level gauges. Salibration methods
GOST 30643-1998 Building structures with thermal insulation. A method of determining sanitary and chamical characteristics

The American Road & Transportation Builders Association

AASHTO T 53-2009(R2018) Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO T 217-2002(R2006) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO TP47-1994 Standard Test Methods for Determining the Ecological Effects of Deicing Chemicals 2000 Edition
AASHTO TP 122-2016(R2020) Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
AASHTO TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
AASHTO T 217-2014(R2018) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO T 364-2017 Standard Method of Test for Determination of Composite Activation Energy of Aggregates due to Alkali–Silica Reaction (Chemical Method)
AASHTO T 337-2009(R2019) Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
AASHTO TP 65-2003(R2006) Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

Japanese Industrial Standards Committee (JISC)

JIS B 7440:1987 Test code for accuracy of coordinate measuring machines
JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
JIS G 0580:1986 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels

TH-TISI

TIS 1216-1994 Standard test method for softening point of bituminous meterials (ring-and-ball apparatus)

AASHTO - American Association of State Highway and Transportation Officials

T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 217-1987 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-2002 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
TP47-1994 Standard Test Methods for Determining the Ecological Effects of Deicing Chemicals (2000 Edition)
TP 122-2016 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
T 337-2009 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

CU-NC

NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method
NC 38-02-15-1989 Food Sanitary Standards System Quantitative Determination of Escherichia Colli. Microbiological Testing Methods
NC 95-24-1986 Perfumery and Cosmetics. Microbial Limit. Determinations
NC 93-14-1986 Community Hygiene. Chloride Determination in Soils. Analycis Method

RO-ASRO

STAS 815-1988 LABORATORY PORCELAIN Test methods
STAS 10463/1-1975 ISO trapezoidal screw threads SOLID GAUGES AND REFERENCE GAUGES FOR TRAPEZOIDAL SCREW THREADS Manufacturing and wear tolerances

IT-UNI

UNI 7896-1978 Technical drawings. Simplified marking of sanitary instruments and equipment
UNI 3681-1955 Chemical analysis methods of metallic materials. Determination of sulfur in nickel. Generative method

SE-SIS

SIS SS 02 81 43 E-1979 Vattenunders?kningar — Best?mning av biokemisk oxygenf?rbrukning, BOD, hos vatten — Utsp?dningsmetod

VN-TCVN

TCVN 2370-1987 Raw silk.Method for determination of standard mass
TCVN 7497-2005 Bitumen.Test method for softening point (ring-and-ball apparatus)

American National Standards Institute （ANSI)

ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM C204-24 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ANSI/ASTM D2538:1995 Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)

Indonesia Standards

SNI 19-6463-2000 Method for calibration of bourdon manometers by dead weight tester

International Organization for Standardization (ISO)

ISO 13975:2012 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems - Method by measurement of biogas production
ISO 10216:2017 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
ISO/FDIS 33406:2023 Approaches for the production of reference materials with qualitative properties
ISO 33406:2024 Approaches for the production of reference materials with qualitative properties

Association Francaise de Normalisation

NF X20-352:1976 Dioxide sulphur determination by mass spectrometry.
NF G62-022:2005 Footwear - Test methods for the assessment of ecological criteria.
NF G62-022*NF EN 14602:2012 Footwear - Test methods for the assessment of ecological criteria
NF EN ISO 21572:2019 Food products - Molecular biomarker analysis - Immunochemical methods for protein detection and quantification
NF A06-725:1992 Chemical analysis of copper - Oxygen dosage - Instrumental method

Standard Association of Australia （SAA）

AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
AS 3580.4.1:2023 Methods of sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide — Direct reading instrumental method
AS 3580.5.1:2023 Methods for sampling and analysis of ambient air, Method 5.1: Determination of oxides of nitrogen — Direct-reading instrumental method
AS 3580.7.1:2011/Amdt 1:2012 Methods for sampling and analyzing ambient air. Direct-reading instrument method for determination of carbon monoxide.
AS 3580.7.1:2011 Methods for sampling and analyzing ambient air. Direct-reading instrument method for determination of carbon monoxide.
AS 3580.5.1:2011 Methods for sampling and analyzing ambient air. Direct-reading instrument method for determination of nitrogen oxides.
AS 3580.7.1:1992 Methods for sampling and analysis of ambient air - Determination of carbon monoxide - Direct-reading instrumental method

Danish Standards Foundation

DS/ISO 10216:2011 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method

German Institute for Standardization

DIN ISO 4794:1983 Laboratory glassware; methods for assessing the chemical resistance of enamels, used for colour and colour marking
DIN CEN/TS 15747:2009 Solid recovered fuels - <(hoch)14>C-based methods for the determination of the biomass content; German version CEN/TS 15747:2008

PK-PSQCA

PS 94-1984 PAKISTAN STANDARD METHOD FOR EVALUATING DIMENSIONAL CHANGES OF FABRICS BY COLD WATER IMMERSION

SAE - SAE International

SAE AS8013-1983 Minimum Performance Standard for Direction Instrument@ Magnetic (Gyroscopically Stabilized)

KR-KS

KS M 6721-2018(2023) Testing method of cut growth using ross flexing apparatus

YU-JUS

JUS G.S2.118-1984 Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter

GOSTR

GOST 33918-2016 Perfumery and cosmetics. Microbiology. Method of determination of sterility

VDI - Verein Deutscher Ingenieure

VDI 4332 BLATT 1-2015 Monitoring der Wirkungen des Anbaus gentechnisch veraenderter Organismen (GVO) - Standardisierte Erfassung von Wildbienen

Others: Biochemical analysis method,Several analysis methods of biochemical instrument,Biochemical method,Biochemical analysis method,Determination method of automatic biochemical analyzer,Biochemical assay method,Several test methods of biochemical analyzer