Small five holes

Small five holes, Total:139 items.

The international standard classification for "Small five holes" includes: Moulding equipment , Drills, countersinks, reamers , Bolts, screws, studs , Equipment for processing of minerals , Other machine tools , Plants and equipment for the food industry , Hulls and their structure elements .

The Chinese standard classification for "Small five holes" includes: Moulds , Clamping fixtures , Combination grippers , Fasteners , Cutters , Fastener , Sieving, Sieve Plate and Sieve Screen , Non-traditional processing machine tool , Food processing machinery in general , General structure of ship hull .

Professional Standard - Aviation

HB 540-1989 Twin-bore Small Ear
HB 3833-1986 Rivet hole lead hole punch
HB 540-1974 double hole small ears
HB 544-1989 Twin-bore Small Fork
HB 8238-2002 Reduced hexagon acorn nuts with MJ thread
HB 3513-1985 Pentagonal straight shank machine reamer used for through holes d＝1~2.8mm
HB 1733-1987 Small Through-hole Cylindrical Positioning Pin
HB 544-1974 double hole fork
HB 1734-1987 Small Screw Hole Cylindrical Positioning Pin
HB 4105-1988 Small Hole Unloading Sleeve
HB 1741-1987 Small Blind Screw Hole Rhombic Positioning Pin
HB 3834-1986 Threaded hole lead hole punch
HB 2285-1976 Five-edge straight shank machine reamer for through holes D=1~2.8mm
HB 1735-1987 Small Blind Screw Hole Cylindrical Positioning Pin

Taiwan Provincial Standard of the People's Republic of China

CNS 10071-1983 Small Size Manhole for Marine Use

未注明发布机构

JIS F 2329:1975 ERRATUM 1:2003 Marine Small Size Manhole

Professional Standard - Aerospace

QJ 776.2-1983 Small-sized Combination Die - Circular Hole Unloading Ring
QJ 267-1978 Small hexagon head bolt with hole
QJ 381-1989 Parallel Shank 1:50 Taper Pin Hole 5-Direction Reamer D=1~3
QJ 774.27-1983 Small-sized Combination Die � Supporting of Guide Pillar with Double Hole
QJ 381-1978 Straight shank 1:50 taper pin hole five square reamer (d=1~3)
QJ 772.13-1983 Small combination die width 150 punching base plate
QJ 773.13-1983 Small-sized Combination Die - Split Male Die with Cutting Hole
QJ 772.2-1983 Die handle with holes for small combination punching die
QJ 776.4-1983 Small-sized Combination Die - Small Circular Hole Unloading Sleeve
QJ 776.11-1983 Small-sized Combination Die - Orifice Hard Stripper Plate
QJ 268-1978 Small hex head screw bolt with hole
QJ 773.12-1983 Small-sized Combination Die - Male Die with Cutting Hole
QJ 776.3-1983 Small-sized Combination Die - Circular Hole Unloading Ring
QJ 772.4-1983 Small combination punching die φ16 punching die handle
QJ 772.3-1983 Small combination punching die punching die handle
QJ 776.1-1983 Small-sized Combination Die - Small Circular Hole Insert Ring
QJ 774.9-1983 Small-sized Combination Die - Cut-hole Terrace Die Bearing

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23480.1-2009(英文版) Small hole high speed drilling electro discharge machines—Part 1：Terminology and testing of accuracy
GB/T 23-1976 Bolts, small hexagon head with hole through the shank
GB/T 23480-2025 Small hole drilling electrical discharge machines—Testing of the accuracy
GB/T 25-1976 Bolts, small hexagon head with holes through the head
GB/T 24-1976 Bolts, small hexagon head with fit neck and hole through the shank
GB/T 3943-1983 Perforated plate with round and elongated apertures
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB 3943-1983 Round and slotted sieves
GB/T 26-1976 Bolts, small hexagon head with fit neck and holes through the head

National Metrological Technical Specifications of the People's Republic of China

JJF 1806-2020 Calibration Specification for Measuring Equipmentof Diameter of Micro and Small Hole

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1983-2017 Black fungus small hole monolithic cultivation technical regulations

Professional Standard-Ships

CB* 3184-1983 Hull structure flow holes, ventilation holes, through welding holes
CB/T 3184-2008 Hull Structure - Drain Hole, Air Hole, Clearance Hole and Scallop for Seal Welding

Professional Standard - Building Materials

JC 861-2000 Grout for concrete small hollow block

Association of German Mechanical Engineers

VDI 2904-1984 Kleinlochungen
VDI 3209 Blatt 1-1989 Reference values for the deep hole boring operation for drilling@ for trepanning@ and for counterboring

Korean Agency for Technology and Standards (KATS)

KS B 3289-2002 Small drills
KS V 2339-2013 Marine small size manhole
KS V 2339-2006 Marine small size manhole
KS B 6356-2003 4-port and 5-port solenoid operated valves for pneumatic use
KS E 3732-1987(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS V ISO 1751:2012 Shipbuilding and marine structures-Ship’s side scuttles
KS E 3110-1990(2010) DIAMOND-REAMING SHELLS

German Institute for Standardization

DIN 66228-2:1978 Small hole card
DIN 68856-7:1983-08 Hardware for furniture; terms for furniture fittings; handles, knobs, escutcheons, escutcheon insets
DIN 66006:1965 Representation of ALGOL symbols on 5-track punched tape and on 80-column punched cards
DIN EN 10371:2021 Metallic materials - Small punch test method
DIN 66228 Beiblatt 1:1978 Pinhole Card Storage and Handling Guidelines
DIN 68856-7:1983 Hardware for furniture; terms for furniture fittings; handles, knobs, escutcheons, escutcheon insets
DIN EN 10371:2019-07 Draft Document - Small Punch Test Method for Metallic Materials; German and English version prEN 10371:2019
DIN 49581:1985-03 Electrical communication engineering; jack strip 10 point and 20 point with three-way jack
DIN 8589-2:2003-09 Manufacturing processes chip removal - Part 2: Drilling, countersinking and counterboring, reaming; Classification, subdivision, terms and definitions

Japanese Industrial Standards Committee (JISC)

JIS F 2329:1975 Marine small size manhole
JIS B 4233:1989 Machine screw counterbores and countersinks
JIS F 2432:1998 Shipbuilding -- Side scuttles -- Positioning

American National Standards Institute （ANSI)

ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ANSI/SAE J561-1993 Electrical Terminals - Eyelet and Spade Type
ANSI/ASME B94.54-1999 Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories

Gosstandart of Russia

GOST 18822-1980 Bolsters with five apertures. Design and dimensions
GOST 27721-1988 Earth-moving machinery. Zoaders. Terminology and commercial. Specifications
GOST 26849-1986 Powder materials. Method of pore size determination
GOST 5939-1951 Plain limit gauges for holes less than 1 mm. Tolerances

IET - Institution of Engineering and Technology

VERY SML APRT TERM-1992 Very Small Aperture Terminals (VSATs)

AR-IRAM

IRAM 5158-1960 Hammer hole size

GM Holden Ltd

HOLDEN HN 1083-2013 Expanded Polyethelyne Foam - Small Cellular Type
HOLDEN HN 1083-1998 Expanded Polyethylene Foam - Small Cellular Type

American Society of Mechanical Engineers (ASME)

ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME B94.54-1994 Specifications for hole saws, hole saw arbors, and hole saw accessoires
ASME B94.54-1999(R2020) Specifications for Hole Saws, Hole Saw Arbors, and HoleSaw Accessories
ASME B94.54-1999 Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories
ASME B94.54-1984 Specifications for hole saws, hole saw arbors, and hole saw accessoires

Defense Logistics Agency

DLA MIL-DTL-5423/12 D-2009 BOOT, DUST AND WATER SEAL, TYPE A (FOR TOGGLE SWITCHES), STYLE 9 (FIVE-HOLE MOUNTING, THROUGH)

Spanish Association for Standardization (UNE)

UNE 28-029-1985 aircraft. Gravity fills small holes

Society of Automotive Engineers (SAE)

SAE AS9585B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.3125-24 UNJF-3A
SAE AS9583B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.1900-32 UNJF-3A
SAE J561-2010 Electrical Terminals Eyelet and Spade Type
SAE J561-2001 Electrical Terminals—Eyelet and Spade Type
SAE AS9585C BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.3125-24 UNJF-3A
SAE AGS840-4 AGS840 Drainage Hole Eyelets
SAE AGS840-4-1958 AGS840 Drainage Hole Eyelets
SAE J485_201304 Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
SAE J485_199805 Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
SAE J485_201611 Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

ESDU - Engineering Sciences Data Unit

ESDU 79013-1979 Heat pipes - properties of common small-pore wicks.

PL-PKN

PN N57141-1951 Punch machine lowercase letter plate regulations

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 1684-1988 Eyelet, Metallic, Electrical, Flat Flanged Type
AIA/NAS NAS 1723-1992 Eyelet, Metallic, Electrical, Rolled Flanged Type (Rev. 1)
AIA/NAS NAS 1788-1992 Eyelet, Metallic, Electrical, Rolled Flanged Type Rev. 2
AIA/NAS NAS 1453-1965 Eyelet, Metallic, Electrical, Printed Circuit Board, Funnel Type

Ente Nazionale Italiano di Unificazione

UNI EN 10371:2021 Metallic materials - Small punch test method
UNI 10481:1995 Filter paper. Determination of equivalent diameter of maximum, minimum and mean flow pore.
UNI 6946:1971 Tapping screws of steel. Core holes.

International Organization for Standardization (ISO)

ISO 1751:2012 Ships and marine technology - Ships' side scuttles

American Petroleum Institute (API)

API RP 43-1991 FINAL REPORT - INVESTIGATION OF CORE ORIENTATION AND PERFORATION DEBRIS ON STANDARD PERFORATION FLOW TESTS (Fifth Edition)

British Standards Institution (BSI)

BS EN 10371:2021 Metallic materials - Small punch test method

RO-ASRO

STAS 8186-1968 Ship equipment "Panama" anchor hole size
STAS 1257-1980 Steel rivets HALF-COUNTERSUNTK SMALL RIVET Dimensions
STAS 4142-1974 COUNTERBORES WITH TAPER HOLE Dimensions
STAS 2177-1968 Ship equipment. Angle anchor hole on ship side. size/dimensions
STAS 8054/6-1980 COUNTERBORES WITH TAPER HOLE Dimensions
STAS 2176-1968 Ship equipment. Forging ship side anchor holes. size/dimensions

United States Navy

NAVY AND10387 REV 6-1974 DRILL SIZES AND DRILLED HOLE TOLERANCES - TWIST
NAVY AND10387 REV 6 NOTICE 1-1997 DRILL SIZES AND DRILLED HOLE TOLERANCES - TWIST

Standards Norway

SN-CWA 15627:2007 Small Punch Test Method for Metallic Materials
NS 2634:1969 Manhole cover for flanged hole

IPC - Association Connecting Electronics Industries

IPC TM-650 5.5.1.12-1998 IPC-A-39 - Small Hole reliability Test Pattern
IPC TM-650 2.2.6A-1997 Hole Size Measurement@ Drilled
IPC TM-650 2.2.6-1973 Hole Size Measurement@ Drilled

CZ-CSN

CSN 02 1205-1964 Bright bolts with small hexagon head and with hole in the head
CSN 70 4186-1978 KOHOUTY TROJCESTN? Rozměry

IT-UNI

UNI 6181-1968 Ship drainage holes. Drainage holes with welded flanges for steel decks with a thickness less than 20 mm

Magyar Szabványügyi Testület

MSZ KGST 3186-1981 Hole punch size

Association Francaise de Normalisation

NF ISO 3859:2007 Reverse taper and direct taper conical cutters with cylindrical shank
NF P26-405:1970 BUILDING HARDWARE. TWO-WAY LOCKS. CHARACTERISTICS.
NF E81-061:1991 Punching and stamping. Aperture and pitch of perforated materiel with round holes and square holes.

TH-TISI

TIS 1296-1995 Two.hole paper punches

American Society for Testing and Materials (ASTM)

ASTM UOP578-11 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM UOP578-02 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials