Repeatability standard deviation

Repeatability standard deviation, Total:197 items.

The international standard classification for "Repeatability standard deviation" includes: Chemical analysis , Steels pipes and tubes for specific use , Limits and fits , Powder metallurgy , Steels profiles , Steel wire, wire ropes and link chains , Steel bars and rods , Ferrous metals , Steels with special magnetic properties , Standardization. General rules , Iron and steel products .

The Chinese standard classification for "Repeatability standard deviation" includes: Basic standards and general methods , Basic standards and general methods , Steel tube and cast iron pipe , Powder metallurgy analysis method , Profile steel and deformed steel , Standardization and Quality Management , Steel ingot and billet , Electric rotating machinery in general .

Professional Standard - Agriculture

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel
JB 2854-1980 Machining allowance, dimension deviation and weight deviation of iron castings

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 28633-2012 Surface chemical analysis—X-ray photoelectron spectroscopy—Repeatability and constancy of intensity scale
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 1482-2022 Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter）
GB 707-1988 Hot-rolled channel steel-Dimensions,shape,weight and tolerances
GB/T 17395-2008 Dimensions, shapes, masses and tolerances of seamless steel tubes
GB/T 1800.3-1998 Limits and fits--Bases--Part 3:Numerical values tables of STANDARD toleranes and fundamental deviations
GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 6726-2008 Cold forming sectional steel for vehicles - Dimensions shape weight and tolerances
GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
GB/T 16761-1997 Dimensions,shape,weight and tolerances for forged flats
GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
GB/T 908-1987 Forged round and square steels dimension, shape, weight and tolerance
GB/T 702-2008 Hot-rolled Steel Bars - Dimensions, Shape, Weight and Tolerances
GB/T 17395-1998 Dimensions,shapes,masses and tolerances of seamless steel tubes
GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
GB/T 14981-2004 Dimensions,shape,mass and tolerances for hot-rolled wire rods
GB/T 14981-2009 Dimension shape mass and tolerance for hot-rolled round wire rod
GB 1800-1979 Tolerance and Fitting - General Standard Tolerance and Fundamental Deviation
GB/T 702-1986 Hot-rolled round and square steels; Dimension,shape,weight and tolerance
GB/T 702-2004 Hot-rolled round and square steel bars―Dimension,shape,weight and tolerance
GB/T 908-2008 Forged Bars - Dimensions, Shape, Weight and Tolerances
GB/T 1800.4-1999 Limits and fits Tables of STANDARD tolerance grades and limit deviations for holes and shafts
GB/T 17395-2024 Dimensions, shapes, masses and tolerances of steel tubes
GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel

Professional Standard - Environmental Protection

HJ 173-2017 Technical specifications for development of environmental reference materials
HJ/T 173-2005 Technical specifications for development of environmental reference materials

Professional Standard - Ferrous Metallurgy

YB/T 002-1991 Dimensions, shape, weight and tolerances for hot-rolled billet
YB/T 001-1991 Dimension, shape, weight and tolerances of cog

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 908-2019 Forged bars for dimensions,shape,weight and tolerances
GB/T 41329-2022 Determination of flow rate of metallic powders—Calibrated funnel method (Gustavsson flowmeter)

Professional Standard - Machinery

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines General standard tolerances and fundamental deviations

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 702-2017 Hot-rolled steel bars - Dimensions, shape, weight and tolerances

Professional Standard - Aviation

HB 8626-2021 Airborne temperature sensor performance testing requires static indication error, recovery characteristics, dynamic response and temperature measurement deviation

Professional Standard-Ships

CB/T 3433-2013 Dimensions,shape,weight and allowable variation of symmetric section steel for ships
CB/T 3433-1992 Dimensions, shapes, weights and allowable deviations of symmetrical steel sections for ships

Korean Agency for Technology and Standards (KATS)

KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS B 0507-1975(2011) Roughness Comparison Specimens
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS K 0041-2011 Standard tolerances for cotton and cotton man－made fiber blend fabrics
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS Q 1001-2005(2011) Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS A 3260-1969(2001) INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS B 0236-1989 Permissible Deviation in Dimensions without Tolerance Indication of dimensions
KS D 3051-2022 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS B 0428-2015 Permissible Deviation in Dimensions without Tolerance Indication for Gas Cut Steel Plates
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS D 3052-2022 Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS A ISO TR 21074:2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Japanese Industrial Standards Committee (JISC)

JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS Z 9051:1963 Interval estimation of the population mean (standard deviation unknown)
JIS Z 9050:1963 Interval estimation of the population mean (standard deviation known)
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0417:1979 Permissible deviation in dimensions without tolerance indication for gas cut steel plates
JIS B 1702-2:1998 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
JIS B 1702-3:2008 Cylindrical gears -- The accuracy -- Part 3: Definitions and allowable values of deviations relevant to corresponding flanks of the gear teeth and radial composite deviations of injection molding plastic gears

IT-UNI

UNI 4202-1959 Zinc belt. Dimensions, deviations and weight
UNI 4201-1959 Zinc plate. Dimensions, deviations and weight
UNI 6777-1971 Glass technical items. Design standards and deviations
UNI 1751-1752-1941 Elastic gasket. Dimensions and deviations
UNI 6100-1967 Pipe metal flange. deviations and flags
UNI ISO 4875-P2:1978 Metal band saw blade. Nominal dimensions and deviations

South African Bureau of Standard

SANS 3001-PR1:2008 Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias

German Institute for Standardization

DIN EN 336:2003 Timber for load-bearing purposes Dimensions, permissible deviations
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 178:1969 Bright Square Steel; Dimensions, Permissible Variations, Weights
DIN 6880:1975 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN 6880 E:2006-06 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 59350 E:2006-06 Precision flat and square steel bars; Dimensions, weights, permissible deviations
DIN 59350:1982 Precision flat and square steel bars; Dimensions, weights, permissible deviations
DIN 59370:1978 Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights

PL-PKN

PN H83104-1972 Groy iron castings Dimensional tolerances, machining allowan- ces and weight deviaiions
PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations
PN H83207-1974 Non-ferrons metal castings Dimensional tolerances machining allowan- ces and weight deviations

CU-NC

NC 02-06-1968 Representation of linear and angular desviations
NC 01-05-1967 Deviation of dimensions without tolerance indication.

American Society for Testing and Materials (ASTM)

ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM F733-19(2024) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D2906-97 Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2906-97(2002) Standard Practice for Statements on Precision and Bias for Textiles
ASTM D3134-15 Standard Practice for Establishing Color and Gloss Tolerances
ASTM E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D3134-97 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2003) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D6518-06e1 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-02 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D6518-02a Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-06 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-03 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D3670-91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D3670-91(2022) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-16 Standard Guide for Carbon Black&x2014Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D2777-03 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM ANS/IEC 60601.2.12:2001 Medical Electrical Equipment8212;Part 2-12; Particular Requirements for the Safety of Lung Ventilators8212;Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International
ASTM D4821-07e1 Standard Guide for Carbon Black Validation of Test Method Precision and Bias
ASTM D3670-91(1996)e1 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions

CZ-CSN

CSN 01 4240 Zb-1982 Czech National Standard 01 4240 *Basic guidelines for interchangeability of specification limit deviations
CSN 01 4421-1982 Measuring of deviations of straightness
CSN 01 4422-1982 Measuring of deviations of flatness.
CSN 01 3136-1981 Technioal drawings. Inscription of linear and angular tolerances

AT-ON

ONORM M 3226-1969 Steel bars; hot rolled square steel.
ONORM M 1373 Teil.1-1985 Rough castings ofheavy metal alloys; dimensional variations
ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts

Society of Automotive Engineers (SAE)

SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial

International Organization for Standardization (ISO)

ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions
ISO 2768:1973 Permissible machining variations in dimensions without tolerance indication
ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

NL-NEN

NEN 2431-1967 Bright key steel. Dimensions, toierances, weights
NEN 2890-1990 Derivation of target sizes from modular sizes of building elements
NEN 2886-1990 Maximum permissible dimensional deviations for buildings Stony load bearing structures
NEN 2888-1990 Maximum permissible dimensional deviations for the erection of load bearing structures of buildings

SCC

AWWA WQTC62518 Evaluating Turbidity Performance Excursions
ASTM BIAS97-97 ASTM Standards on Precision and Bias for Various Applications
JIS B 1702-3:2020 Cylindrical gears -- System of tolerance classification -- Part 3: Definitions and allowable values of deviations relevant to corresponding gear-tooth flanks and radial-composite deviations of injection-molded plastic gears

Standard Association of Australia （SAA）

AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias
AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

GSO

GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
BH GSO ASTM F3357:2023 Standard Guide for Designing Reusable Medical Devices for Cleanability
GSO ASTM F3357:2023 Standard Guide for Designing Reusable Medical Devices for Cleanability
GSO ASTM E177:2021 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

SE-SIS

SIS SMS 715-1968 Tolerances for dimensions without tolerance markings

AASHTO - American Association of State Highway and Transportation Officials

R 32-2011 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
R 32-2009 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
R 32-2019 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
PP7-1995 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
R 32-2003 Standard Recommended Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
PP7-1994 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer (Edition 1A)

The American Road & Transportation Builders Association

AASHTO R 32-2011 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
AASHTO R 32-2020 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer

DIN

DIN 7155-1:1966 ISO-fits for the shaft basis system; tolerance zones, deviations

Danish Standards Foundation

DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
DS/ISO 8423:1992 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

British Standards Institution (BSI)

BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

RU-GOST R

GOST 30893.1-2002 Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST R 50779.53-1998 Statistical methods. Acceptance sampling by variables for normal distribution. Part 1. Known standard deviation
GOST 24980-1981 Glass containers. Method of determination of size, mass, capacity and shape deviation

KR-KS

KS A ISO TR 21074-2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

VN-TCVN

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

AGMA - American Gear Manufacturers Association

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement
ANSI/ASTM/IEC 60601.2.12:2009 Medical Electrical Equipment - Part 2-12; Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators with Deviations by ASTM International

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A102-C-2000 Accelerated Moisture Resistance - Unbiased Autoclave

American Gear Manufacturers Association

AGMA 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error