Rheology test experiment

Rheology test experiment, Total:136 items.

The international standard classification for "Rheology test experiment" includes: food products in general , Electric traction equipment .

The Chinese standard classification for "Rheology test experiment" includes: Grease and oil processing and products , Basic standard and general method , Electric traction equipment .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 14615-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Extensograph test
GB/T 14614-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Farinograph test
GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test

Professional Standard - Coal

MT/T 795-1998 Testing method of rheologic characteristic for direct shear of rock and soil

未注明发布机构

DIN 53019-4 E:2015-12 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 51810-2 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51810-3 E:2015-10 Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method

Group Standards of the People's Republic of China

T/CCCTA 0048-2024 Test methods for laboratory performance of anti-corrosion materials of power transmission and transformation tquipment
T/CPSS 1007-2018 Short-circuit test method for high power converter in fusion device
T/CES 092-2022 Technical specification for fire simulation test of large-scale converter transformer

Professional Standard - Petroleum

SY 6282-1997 Heavy oil reservoir fluid physical property analysis method Crude oil seepage rheological characteristics test
SY/T 6282-1997 Analytical Approach of Fluid Physical Proterty for Heavy-oil Reservoirs - Measurements of Porous Flow Rheological Characterization for Crude Oil

Professional Standard - Electricity

DL/T 1798-2018 Code of commissioning and prophylactic test for converter transformer
DL/T 1999-2019 Method of on-site DC partial discharge test for converter transformer

Professional Standard - Railway

TB/T 2437-2006 Power convertors installed on board rolling stock. Characteristics and test methods

SCC

DIN /TR 91143-2:2022 Rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
BS PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons-Determination of the time-dependent structural change (thixotropy)
DANSK DS/ISO/TR 20659-2:2024 Rheological test methods – Fundamentals and interlaboratory comparisons – Part 2: Determination of the time-dependent structural change (thixotropy)
DIN SPEC 91143-2:2012 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
BS 2782-7 METHOD 722B:1996 Methods of testing plastics. Rheological properties-Determination of the fluidity of plastics using capillary and slit-die rheometers
SPC GB/T 37511-2019 Inspection of grain and oils -- Doughs rheological properties determination of wheat flour -- Mixolab test (TEXT OF DOCUMENT IS IN CHINESE)
AMCA 250-22 Laboratory Methods of Testing Jet Fans for Performance
BS PD ISO/TR 20659-1:2024 Rheological test methods. Fundamentals and interlaboratory comparisons-Determination of the yield point
AMCA 610-06(R2012) Laboratory Methods of Testing Airflow Measurement Stations for Performance Rating
SPC GB/T 14615-2019 Inspection of grain and oils -- Doughs rheological properties determination of wheat flour -- Extensograph test (TEXT OF DOCUMENT IS IN CHINESE)
AMCA 610-19 Laboratory Methods of Testing Airflow Measurement Stations for Performance Rating
BS 2782-7 METHOD 720A:1979 Methods of testing plastics. Rheological properties-Determination of melt flow rate of thermoplastics
DANSK DS/ISO/TR 20659-1:2024 Rheological test methods – Fundamentals and interlaboratory comparisons – Part 1: Determination of the yield point
BS 2782-7 METHOD 733A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of polyamides
DIN 53019-4 E:2015 Draft Document - Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
BS 2782-7 METHOD 732A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number:general conditions
VDI/VDE 2635 BLATT 1-2015 Experimental structural analysis — strain gauges with metallic measuring grid — characteristics and test conditions
AASHTO T 315-2020 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2012(2016) Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
BS 4317-27:1992 Methods of test for cereals and pulses-Determination of rheological properties of doughs using an alveograph
AASHTO T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2019 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
BS 4317-21:1989 Methods of test for cereals and pulses-Determination of rheological properties of doughs using an extensograph

British Standards Institution (BSI)

PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons. Determination of the time-dependent structural change (thixotropy)
PD ISO/TR 20659-1:2024 Rheological test methods. Fundamentals and interlaboratory comparisons. Determination of the yield point
BS EN 50327:2003 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
BS 2782-7 Method 721A:1988 Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric

German Institute for Standardization

DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN 51810-2:2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51810-3:2016-08 Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method
DIN 51810-3:2016 Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method
DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4:2016 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 51810-2:2011 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system

International Organization for Standardization (ISO)

ISO/DTR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO/CD TR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO/TR 20659-1:2024 Rheological test methods
ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/TR 20659-2:2024 Rheological test methods
ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point

American Society for Testing and Materials (ASTM)

ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM C1874-19 Standard Test Method for Measuring the Rheological Properties of Cementitious Materials Using a Coaxial Rotational Rheometer
ASTM C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM C639-95 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D7175-23 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM C639-01(2007) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D6204-19 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-19a Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D8491-22 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-15 Standard Test Method for Rubber&x2014Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D3364-99(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D3364-99 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D7300-06 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7300-18 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7300-11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D5099-08(2022) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D7605-11 Standard Test Method for Thermoplastic Elastomers Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D3387-83(2003) Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3387-83(1996) Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM D8491-23 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

(U.S.) Ford Automotive Standards

FORD FLTM BU 153-01-2005 RHEOLOGICAL TESTING FOR DETERMINING THE VISCOSITY OF ADHESIVES AND SEALERS
FORD FLTM BI 163-01-2004 RHEOLOGICAL TESTING FOR DETERMINING THE REACTIVITY PROFILE OF HEM FLANGE ADHESIVES

AASHTO - American Association of State Highway and Transportation Officials

TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

Korean Agency for Technology and Standards (KATS)

KS M 3004-2008 Testing method for flow properties of thermoplastics with a capillary rheometer
KS F 2393-2009 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer

Standard Association of Australia （SAA）

AS 2891.12.1:1995 Methods of sampling and testing asphalt - Determination of the permanent compressive strain characteristics of asphalt - Dynamic creep test

Japanese Industrial Standards Committee (JISC)

JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer

Association Francaise de Normalisation

NF P98-260-1:2000 Test relating to pavements - Measurements of rheological properties on bituminous mixtures - Part 1 : determination of the modulus and of the lost linearity under direct traction (tensile test).
NF F42-327/A1*NF EN 50327/A1:2005 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
NF F42-327*NF EN 50327:2005 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
NF X45-309:2000 Filter cartridges - Test methods - Resistance to flowrate cyclic variations.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-28-1-1998 Experimental Determination of the Performance of a Four-Way Diffuser with Variable Area

VDI - Verein Deutscher Ingenieure

VDI/VDE/GESA 2635 Blatt 1-2005 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions
VDI/VDE/GESA 2635 Blatt 1-2007 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions
VDI/VDE 2635 Blatt 1-2014 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions

RU-GOST R

GOST R 54800-2011 Power convertors railway rolling stock. Characteristics and test methods

GB-REG

REG NASA-LLIS-4580-2012 Lessons Learned - Early Implementation of a Change Management Process

The American Road & Transportation Builders Association

AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2022 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

European Committee for Standardization (CEN)

CWA 17906:2022 Code of Practice for the Impression Creep Test

YU-JUS

JUS G.S2.512-1997 Flastics - Determination of rheologicaJ properties of thermoplastics with capillary rheometer

Others: