Calorimeter method for measuring organic waste liquid

Calorimeter method for measuring organic waste liquid, Total:164 items.

The international standard classification for "Calorimeter method for measuring organic waste liquid" includes: Other equipment for petroleum and natural gas industries , Organic chemicals , Heat treatment and coating , Glass in general , Organic chemicals in general .

The Chinese standard classification for "Calorimeter method for measuring organic waste liquid" includes: Petroleum drilling , Organic chemicals in general , Heat treatment , Laboratory glass, ceramic and plastic vessel , Material composition analysis instrument and environment detection instrument in general .

Professional Standard - Nuclear Industry

EJ/T 20189-2018 Liquid Fluorescence Method for Determination of Uranium Content in Low-Level Organic Waste Liquid
EJ/T 20184-2018 Determination of Plutonium α Activity Concentration in Low Level Organic Waste Liquid by TiOA Extraction-Liquid Scintillation Method
EJ/T 20186-2018 Determination of 137Cs activity concentration in low-level organic waste liquid by gamma spectroscopy

Professional Standard - Environmental Protection

HJ 1024-2019 Solid waste - Determination of loss on ignition – Gravimetric method
HJ 761-2015 Solid waste - Determination of organic matter - Ignition loss method

Professional Standard - Chemical Industry

HG/T 6267-2024 Method for determining fluorine content in copper-containing etching waste liquid
HG/T 5966-2021 Determination of chemical oxygen demand in high chlorine wasteliquid
HG/T 5964-2021 Determination of dissolved non-biodegradable chemical oxygen demand in wasteliquid
HG/T 5362~5365-2018 Treatment and disposal methods of chromium-containing waste liquid, phosphorous-containing waste liquid and tin-containing waste liquid and determination method of copper content in copper-containing sludge (2018)

Group Standards of the People's Republic of China

T/CMA 034-2021 Calibration method for salt content meters analyzers
T/DCB 002-2023 Calculation method of scrap amount of used power batteries
T/QAS 053-2021 TOC Meter Method for Determination of Chemical Oxygen Demand in High Chlorine Wastewater
T/CAB 1038-2020 Determination of hydrogen storage density of hydrogenated liquid organic hydrogen carrier - Water displacement method
T/ZJATA 0001-2021 Solid waste- determination of calorific value for sludge- bomb calorimetry
T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)
T/CSEE 0018-2016 Measuring methods of organics in purity water

Professional Standard - Petroleum

SY/T 6677-2007 Calibration method of mnd retort assembly
SY/T 6865-2012 Calibration Method of Mid-pressure Drilling Fluid Filter Press
SY/T 6677-2022 Calibration method of drilling fuid retort assembly
SY 6865-2012 Calibration method of pressure filtration loss tester in drilling fluid
SY/T 6816-2010 Calibration Method of Equipment for Measuring Sand Content in Drilling Fluids
SY 6816-2010 Calibration Method of Drilling Fluid Sand Content Meter
SY/T 6865-2021 Calibration method of drilling fluid filter press
SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter

Professional Standard - Commodity Inspection

SN/T 3005-2011 Test Method for Instrumental Determination of Carbon

National Metrological Verification Regulations of the People's Republic of China

JJG(石油) 16-1991 Verification Regulation of Equipment for Measuring Solid Content in Drilling Fluids

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 6324.4-1986 Determination of Trace Sulfur in Organic Liquid Products Microcoulometry
GB/T 35092-2018(英文版) Methods of static load deflection measurement for hydraulic presses
GB/T 27945.2-2011 The management of hazardous solid wastes from heat treatment salts - Part 2: Test method of extractives
GB/T 6324.4-1986 Determination of trace sulphur in products of organic liquid--Micro-coulometry method
GB/T 6324.12-2023 Test method of organic chemical products—Part 12: Determination of trace mercury in organic liquid products—Atomic fluorescence spectrometric method
GB/T 6324.4-2008 Test method of organic chemical products - Part 4: Determination of trace sulfur in organic liquid products - Microcoulometric method
GB/T 44215-2024 Glassware一Test method for inner surface hot end spraying liquid

Hebei Provincial Standard of the People's Republic of China

DB13/T 2499.1-2017 Methods for the determination of liquid mixtures - Part 1: Determination of the calorific value of cartridges (bomb calorimetry)

Professional Standard - Machinery

JB/T 8277-1999 Preparation method of standard solution for the measurement of conductivity meter

Tianjin Provincial Standard of the People's Republic of China

DB12/T 961-2020 Determination of organic matter content in soil direct heating method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5435-2005 Photometric and colorimetric measurement procedure for airborne active matrix liquid crystal display

Association Francaise de Normalisation

NF X43-103:1996 Air quality. Olfactometric measurements. Measurement of the odour of a gazeous effluent. Supra-threshold methods.
NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF E58-073:1995 Earth-moving machinery. Hydraulic excavators. Methods of measuring tool forces.

British Standards Institution (BSI)

BS EN 27726:1994 Thermal environments. Instruments and methods for measuring physical quantities
BS 3680-9B:1981 Methods of measurement of liquid flow in open channels. Water level instruments-Float-operated water level recorders (mechanical and electromechanical)
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS 3680-8H:1996 Measurement of liquid flow in open channels. Measuring instruments and equipment. Method of specifying the performance of hydrometric equipment
BS 3680-8A:1973 Measurement of liquid flow in open channels. Measuring instruments and equipment-Current meters incorporating a rotating element
BS 3680-9A:1971 Methods of measurement of liquid flow in open channels. Water level instruments-Specification for the installation and performance of pressure actuated liquid level measuring equipment
19/30404099 DC BS EN IEC 62372. Nuclear instrumentation. Housed scintillators. Measurement methods of light output and intrinsic resolution

Standards Norway

NS-ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
NS 197:1945 Tool profiles for plowed tables with chamfer or staff on 2 sides (TGV2 and TGB2 profiles)

International Organization for Standardization (ISO)

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO/TR 4011:1976 Road vehicles; Apparatus for measurement of the opacity of exhaust gas from diesel engines
ISO 6015:1989 Earth-moving machinery; hydraulic excavators; methods of measuring tool forces

Gosstandart of Russia

GOST R 8.917-2016 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method
GOST R 8.917-2015 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method
GOST 22091.9-1986 X-ray devices. The methods of measuring effective focus spot size
GOST R 52908-2008 Thermal insulating products for building applications. Method for determination of organic content
GOST R 55451-2013 Organic fertilizers. Methods for the determination of mass density
GOST 24585-1981 Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods
GOST R 8.641-2013 State system for ensuring the iniformity of measurements. State verification scheme for measuring instruments of the water solutions ion content by electrochemical methods (pX measuring instruments)

National Standardisation Body (ASRO)

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS 13104-1992 Animal feeding stuffs. Determination of organophosphoric pesticide wastes content
STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density

Indonesia Standards

SNI 06-2510-1991 Water, Test methods for organic phosphate content by gas chromatography apparatus
SNI 06-2508-1991 Water, Test methods for organic chlor pesticide content by gas chromotography apparatus
SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters

Danish Standards Foundation

DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DANSK DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests

Czech Standards Institute (UNMZ)

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities

American Society for Testing and Materials (ASTM)

ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM STP 68-1946 Measuring organic pollutants in water and wastewater
ASTM C1616-07 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM STP 686-1981 Measuring organic pollutants in water and wastewater
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E711-87(2004) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E711-87(1996) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D6743-01e1 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6743-01 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D1427-68(1974) Standard Methods of Test for RESIDUAL CHLORINE IN WASTE WATER
ASTM E819-98 Standard Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals
ASTM RR-D01-1144 2013 D6132-Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters

Korean Agency for Technology and Standards (KATS)

KS F 2104-2013(2018) Standard test method of organic matter contents in soils by ignition loss
KS F 2104-2013 Standard test method of organic matter contents in soils by ignition loss
KS F 2104-2008 Testing method of organic matter in soils by ignition loss
KS B ISO 6015-2020 Earth-moving machinery－Hydraulic excavators－Methods of measuring tool forces

Ente Nazionale Italiano di Unificazione

UNI EN 27726:1995 Thermal environments. Instruments and methods for measuring physical quantities.
UNI/PdR 123:2021 Test method for determining the quality of the organic waste to be recycled through anaerobic digestion and composting processes
UNI 11452:2012 Hydrometry - Measurement of rainfall intensity (liquid precipitation) - Metrological requirements and test methods for catching type gauges

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

NORVEN 76-19-1965 Quantitative measurement of organic impurities in concrete sand (calorimetric method)

GCC Standardization Organization

GSO ISO/TS 19700:2013 Controlled equivalence ratio method for the determination of hazardous components of fire effluents
GSO ASTM D4308:2022 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

Polski Komitet Normalizacyjny (PKN)

PN C04573-01-1986 Water and waste water Test for organie solvents extractable matters Determination of total content of petroleum ether extractable organie by gravimetric method
PN C04578 ArkusZ06-1974 Water and wastewater Oxygen demand and organic carbon content tests Determination of biochemical oxygen demand (BODn) by manometric method
PN C04578-02-1985 Water and waste water Tests for chemical oxygen demand and of organie carbon content Determination of chemical oxygen demand (COD) by permanganate method

Japanese Industrial Standards Committee (JISC)

JIS C 2541:2023 Thermal measurement method of loss distribution on iron core surfaces by means of an infrared camera
JIS K 0106:1995 Methods for determination of chlorine in flue gas
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
JIS Z 4511:2005 Methods of calibration for exposure meters, air kerma meters, air absorbed dose meters and dose-equivalent meters
JIS K 0221:1988 Methods for determination of arsenic in flue gas
JSA JIS B 7989 Determination of Volatile Organic Compounds in Flue Gas by Using a Measuring Analyzer

Magyar Szabványügyi Testület

MSZ 1709/4.lap-1969 Measurement of liquid flow, with measuring instruments

Austrian Standards

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

U.S. Military Regulations and Norms

ARMY MIL-HDBK-705 C VALID NOTICE 1-1992 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS
ARMY MIL-HDBK-705 C-1987 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS

Association of German Mechanical Engineers

VDI 3862 Blatt 8-2014 Messen gasfoermiger Emissionen - Messen von Formaldehyd im Abgas von Verbrennungsmotoren - FTIR-Verfahren
VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
VDI/VDE 3519 Blatt 10-2012 Fuellstandmesstechnik - Waermeableitungsverfahren
VDI/VDE 3519 Blatt 10-2011 Fuellstandmesstechnik - Waermeableitungsverfahren
VDI 2080-1996 Measuring methods and measuring instruments for air-conditioning systems

Society of Automotive Engineers (SAE)

SAE J860-2003 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_200907 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_198501 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_200305 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_199601 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-2015 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_202204 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860_201506 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-1996 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-2009 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-2022 Test Method for Measuring Mass (Weight) of Organic Trim Materials
SAE J860-1985 Test Method for Measuring Weight of Organic Trim Materials

American National Standards Institute （ANSI)

ANSI/ASTM D4272:1999 Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03)
ANSI/AHAM TC-1-2007 Method for Measuring Performance of Household Trash Compactors

Instituto Colombiano de Normas Técnicas y Certificación

ICONTEC 3223-1991 Electronics. Method for measuring thermal conductivity of liquids

Bureau of Indian Standards

IS 10052-4-1984 Electromagnetic Interference Measuring Apparatus And Measuring Methods: Part 4 Electromagnetic Interference Measuring Apparatus Having Detectors Other Than Quasi-Peak
IS 14273-1999 Automotive Vehicles - Exhaust Emissions - Gaseous Pollutants from Vehicles Fitted with Compression Ignition Engines - Method of Measurement
IS 1448-6-1984 Methods of test for petroleum and its products part 6: Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter Method

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4560-1988 Waste water.Method for determination of residue content
TCVN 7876-2008 water.Determination of organochlorine pesticides content.Liquid-liquid extraction gas chromatographic method

Underwriter Laboratories of Canada (ULC)

ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)
ULC 135-2004 Standard Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter)

Spanish Association for Standardization (UNE)

UNE 82501:2004 Measuring instruments. Instruments intended to measure the emissions of exhaust pollutant gaz of motor vehicles. Characteristics and test methods.
UNE 115223:1993 EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. METHODS OF MEASURING TOOL FORCES.

American Association of State Highway and Transportation Officials

AASHTO T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

Swedish Institute for Standards

SIS SS 02 81 04-1991 Determination of organically bound chlorine in waste waters by the AOXmethod

American Petroleum Institute (API)

API 4121-1971 IMPROVED INSTRUMENTATION FOR DETERMINATION OF EXHAUST GAS OXYGENATE CONTENT

Netherlands Institute for Standardization

NEN 6660-1981 Waste water - Titrimetric determination of chloride content (mercurimetric)

Belgian Standards Institute

NBN 316-1954 Method for determination of heat emissions from heaters for hot water heating

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM D4308:2023 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

Others: