Aluminum alloy shear strength specimen dimensions

Aluminum alloy shear strength specimen dimensions, Total:344 items.

The international standard classification for "Aluminum alloy shear strength specimen dimensions" includes: Testing of metals , Corrosion of metals , Surface treatment and coating , Aluminium and aluminium alloys , Metallic coatings , Rubber , Reinforced plastics , Plastics in general , Adhesives , Carbon materials , Testing of metals in general , Mechanical testing of metals , Petroleum products and natural gas handling equipment , Adhesives .

The Chinese standard classification for "Aluminum alloy shear strength specimen dimensions" includes: Metal mechanical property test method , Metal chemical property test method , Material Protection , Metal processing property test method , Rubber products in general , Fibre reinforced composites , Synthetic resin and plastic , Basic standards and general methods for adhesives , Special carbon material , Basic standards and general methods for synthetic resin and plastic , Powder metallurgy analysis method , Nonmetallic materials used for aviation and aerospace .

Group Standards of the People's Republic of China

T/SHMHZQ 052-2022 Technical specification for shear strength of carbon composites
T/CASAS 018-2021 Test method for shear strength of micro and nano metal sintered joints
T/CSEB 0003-2018 Testing method for determining dynamic shear strength of rock materials by the punch shear specimen

未注明发布机构

DIN CEN/TS 12697-51:2017*DIN SPEC 18099:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
DIN EN ISO 10123 E:2019-03 Adhesives Determination of shear strength of anaerobic adhesives using pin-ring specimens (draft)
DIN 18137-3 E:2002-09 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
ASTM RR-D14-1017 2010 D1002-Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM RR-B07-1003 2011 B0769-Test Method for Shear Testing of Aluminum Alloys
ASTM RR-D14-1015 2012 D0905-Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM RR-B07-2000 2022 B0831-Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM RR-D14-1013 2008 D3931-Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
DIN EN ISO 29022 E:2012-04 Dental bonding incision edge shear bond strength test (draft)
DIN 18137-3 E:1997-10 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test

Professional Standard - Aviation

HB 5474-1991 Method of Shear Strength Test for Heat Spray Coating Layer
HB 5294-1984 High Strength Aluminum Alloy Twin Cantilevers (DCB) Specimen - Stress Corrosion Test Method
HB 5164-1981 Metallic Cementing - Test Method for Tensile and Shear Strength

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool
GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
GB/T 12830-1991 Rubber, vulcanized-Determination of adhesion to metal plates in shear-Quadruple shear method
GB/T 1450.1-2005 Fibre- reinforced plastic composites— Determination of interlaminar shear strength
GB/T 30969-2014 Test method for short-beam shear strength of polymer matrix composite materials
GB/T 13096.4-1991 Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short-beam method
GB/T 10007-1988 Cellular plastics--Determination of shear strength of rigid materials
GB/T 10007-2008 Rigid cellular plastics - Determination of shear strength
GB/T 44302-2024 Carbon fibre reinforced plastics and metal assemblies—Determination of the tensile lap-shear strength
GB/T 6328-1999 Adhesives—Test method for shear impact strength of adhesive bonds
GB/T 3252-1982 Aluminum and aluminum alloys--Shear test method for rivet wire and rivets
GB/T 1461-1988 Test method for interlaminar shear strength of ring of filament-winding reinforced plastics
GB/T 1450.2-2005 Fibre-reinforced plastic composites— Determiantion of the punch- type shear strength
GB/T 13222-1991 Thermal sprayed metallic coatings－Determination of shear strength

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 6328-2021 Test method for shear impact strength of adhesive bonds
GB/T 40388-2021 Test method for shear strength of C/C composites

Professional Standard - Chemical Industry

HG/T 3839-2006 Testing methods for shear strength of plastics by punch tool
HGB 4045-1960 Determination of Bonding Strength of Rubber and Metal by Shear Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34487-2017 Shear testing method of aluminium alloy products for structural members
GB/T 3250-2017 Shearing and riveting test method of wires and rods for the aluminum and aluminum-alloy rivets
GB/T 33332-2016 Test method for dynamic shear strength of adhesive tapes

Professional Standard - Non-ferrous Metal

YS/T 1009-2014 Sintered metal porous materials—Determination of shear strength
YS/T 550-2006 Thermal sprayed metallic coatings -- Determination of shear strength
YS/T 485-2005 bimetal material - Determination of shear strength

Military Standard of the People's Republic of China-General Armament Department

GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)

Professional Standard - Petroleum

SY/T 0041-2012 Standard Test Method for Apparent Shear Strength of Coatings to Metal
SY/T 0041-1997 Test method for apparent shear strength of pipeline coatings to metal

Professional Standard - Aerospace

QJ 1634A-1996 Test Method of Compression Shear Strength of Adhesive

Professional Standard - Civil Aviation

MH/T 6099-2013 Standard test method for lap shear strength of sealants

PL-PKN

PN H04321-1986 Metalls Testing of shear strength
PN M69782-1974 Shearing strength test of spot weld
PN C89300-1969 Adhesive? to me?als Determinalion of shear s?rength
PN H92741-02-1987 Aluminium and aluminium alloys Sheets Dimensions

(U.S.) Ford Automotive Standards

FORD FLTM BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM EU-BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM EU-BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES

SCC

ASD-STAN prEN 4525:1970 Aluminium and aluminium alloys Test mehods Shear testing
DANSK DS/EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds
DANSK DS/EN 15337:2007 Adhesives – Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
DANSK DS/EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
NS-EN 15337:2007 Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)
AIA NA0019-0024 RIVET, SOLID, COUNTERSUNK, 100° SHEAR HEAD, ALUMINUM AND ALUMINUM ALLOY, METRIC
DIN EN 4525 E:1999 Draft Document - Aerospace series - Aluminium and aluminium alloys - Test methods; shear testing
BS PD CEN/TS 12697-51:2017 Bituminous mixtures. Test methods-Surface shear strength test
DANSK DS/ISO 8749:1988 Fastening elements. Shear strength testing of pins
BS 5350-C15:1982 Methods of test for adhesives-Determination of bond strength in compressive shear
AENOR UNE 7437:1980 SHEAR TEST OF RIVETS AND WIRES FOR ALUMINUM RIVETS AND ITS ALLOYS
BS 5350-C5:1976 Methods of test for adhesives-Determination of bond strength in longitudinal shear
DANSK DS/EN ISO 10123:2019 Adhesives – Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
NS-EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
DANSK DS/EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
NS-EN ISO 14273:2001 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)
NS 9515:1985 Adhesives - Determination of tensile lap-shear strength of high strength adhesive bonds
AS 1321.3:1976 Methods for the sampling and testing of adhesives, Part 3: Bond strength of cured wood-to-wood adhesives in shear
NS-EN ISO 9653:2000 Adhesives — Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
13/30266452 DC BS EN ISO 14273. Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
DIN EN ISO 10123 E:2019 Draft Document - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013); German and English version prEN ISO 10123:2019
NS-EN ISO 13445:2006 Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
12/30252883 DC BS ISO 10123. Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
UNE-EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds. (ISO 14273:2000)
BS ISO 20337:2018 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
DANSK DS/CEN/TS 12697-51:2017 Bituminous mixtures – Test methods – Part 51: Surface shear strength test
DANSK DS/ISO 20337:2019 Fibre-reinforced plastic composites – Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus

American Society for Testing and Materials (ASTM)

ASTM C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
ASTM B769-06 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-94(2000) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11(2016) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11(2021) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-14 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-19 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-22 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-93(1998) Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM D4562-01(2019) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D4562-90(1995)e1 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM E229-97 Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM D4562-01(2007) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D4562-01 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D4562-01(2013) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM B565-20 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B565-94(2000) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM D5321/D5321M-21 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321/D5321M-17 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321/D5321M-19 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321/D5321M-20 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321-92(1997) Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
ASTM D3983-98(2019) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D7617/D7617M-11(2017) Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D4501-95 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01(2014) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01e1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D4501-01(2009)e1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

GM Daewoo

GMKOREA EDS-T-7904-2011 Adhesive Shear Strength Test Method Using Pin-and-Collar Specimens

Association Francaise de Normalisation

NF EN ISO 29022:2013 Oral medicine - Adhesion - Shear strength test on samples with notched edges
NF A89-572:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.
NF A89-570:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.
NF E73-104*NF ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
NF T76-335*NF EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
NF T76-115:1994 Adhesives. Test method for shear impact strength of adhesive bonds.
NF E83-200*NF EN ISO 12996:2013 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF EN ISO 20337:2019 Fiber Reinforced Plastic Composites - Shear Test Method Using Shear Frame for Determination of In-Plane Shear Stress/Shear Strain and Shear Modulus
NF E73-106*NF ISO 5747:2015 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
NF A50-761:1970 ALUMINIUM AND ALUMINIUM ALLOYS. COILS. TOLERANCES ON DIMENSIONS.
NF A50-705:1984 ALUMINIUM AND ALUMINIUM ALLOYS. RECTANGULAR SECTION EXTRUDED BARS. DIMENSIONAL TOLERANCES AND RECOMMENDED DIMENSIONS.
NF E73-109:1988 Pliers and nippers. Slip joint pliers. Dimensions and test values.
NF E73-108:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values.
NF E73-109:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values.

KR-KS

KS P ISO 29022-2019 Dentistry — Adhesion — Notched-edge shear bond strength test
KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method

Korean Agency for Technology and Standards (KATS)

KS P ISO 29022:2019 Dentistry — Adhesion — Notched-edge shear bond strength test
KS M 3729-2015 Testing methods for impact shear strength of adhesive bonds
KS B ISO 14323:2014 Resistance spot welding and projection welds－Destructive testing of welds－Specimen dimensions and procedure for impact sheaar test and cross－tension testing
KS B ISO 14323:2007 Resistance spot welding and projection welds-Destructive testing of welds-Specimen dimensions and procedure for impact sheaar test and cross-tension testing
KS M ISO 9653-2022 Adhesives－Test method for shear impact strength of adhesive bonds
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS M ISO 13445-2022 Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
KS M 3721-2008(2013) Testing methods for strength properties of adhesives in shear by compression loading
KS M 3720-2008(2013) Testing methods for strength properties of adhesives for wood in shear by tension loading
KS C ISO 14273-2001(2011) Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
KS L 1632-2024 Test method for shear bond strength of ceramic-based sealants
KS M ISO 19212-2019 Adhesives — Determination of temperature dependence of shear strength
KS M ISO 9653:2007 Adhesives－Test method for shear impact strength of adhesive bonds
KS C ISO 14273:2017 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
KS M ISO 19212-2014(2019) Adhesives — Determination of temperature dependence of shear strength
KS C ISO 14273:2001 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
KS M ISO 14129-2021 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 9653-2007(2017) Adhesives－Test method for shear impact strength of adhesive bonds
KS B ISO 8976:2002 Pliers and nippers-Multiple slip joint pliers-Dimensions and test values
KS M 3734-2011 Testing methods for shear strength of adhesives bonds by tensile loading
KS M 3734-1986 Testing methods for shear strength of adhesives bonds by tensile loading
KS M 3385-2020 Testing method for transverse shear strength of glass fiber reinforced plastics
KS M 3729-2011 Testing methods for impact shear strength of adhesive bonds
KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
KS B 0416-2019 Permissible deviations in dimensions without tolerance indication for shearing of metal plates
KS M 3720-2015 Testing methods for strength properties of adhesives for wood in shear by tension loading
KS M 3721-2015 Testing methods for strength properties of adhesives in shear by compression loading

HU-MSZT

MSZ 4206-1966 Copper, aluminum alloy dimensions. weight and chop
MSZ 9322-1983 Aluminum, aluminum alloy plate general dimensions
MSZ 9323-1983 Aluminum, aluminum alloy track dimensions
MSZ 7803-1986 Screw aluminum and alloy aluminum dimensions
MSZ 9320-1968 Aluminum, aluminum alloy wire general dimensions
MSZ 3762-1968 Dimensions of aluminum and aluminum alloy discs
MSZ 3757-1983 Aluminum and aluminum alloy elongated tube dimensions

German Institute for Standardization

DIN 50162:1978-09 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN ISO 5749:2006 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
DIN EN ISO 10123:2019 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
DIN ISO 5748:2006 Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004) English version of DIN ISO 5748:2006-09
DIN EN ISO 10123:2019-10 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013); German version EN ISO 10123:2019
DIN EN ISO 29022:2013-09 Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013); German version EN ISO 29022:2013
DIN EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006); English version of DIN EN ISO 14323:2006-07
DIN EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000
DIN EN ISO 13445:2006-09 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003); German version EN ISO 13445:2006
DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
DIN 6538-1:1993 Twist drills with hardmetal cutting edges with reinforced parallel shank; dimensions
DIN 13990:2017-04 Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments
DIN EN ISO 9653:2000-10 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000
DIN EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
DIN 18137-3:2002 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN ISO 8976:2006 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976:2004) English version of DIN ISO 8976:2006-09
DIN 6538:2020-10 Twist drills with hardmetal cutting edges with reinforced parallel shank - Dimensions
DIN EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ˝ 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN CEN/TS 12697-51:2017-10*DIN SPEC 18099:2017-10 Bituminous mixtures - Test methods - Part 51: Surface shear strength test; German version CEN/TS 12697-51:2017
DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test

ZA-SANS

SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test

AT-ON

ONORM M 3571-1980 Strip and strip cut to lengthfor leaf Springs ofwrought copper alloys; cold rolled; dimensions

International Organization for Standardization (ISO)

ISO/R 2101:1971 Aluminium and aluminium alloys — Shear test for rivet wire and rivets
ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
ISO 5748:1988 Pliers and nippers - End cutting nippers - Dimensions and test values
ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
ISO 12579:2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
ISO 4587:1979 Adhesives; Determination of tensile lap-shear strength of high strength adhesive bonds
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 9653:1998 Adhesives - Test method for shear impact strength of adhesive bonds
ISO/FDIS 7972 Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
ISO 5747:1995 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
ISO 8976:2021 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
ISO 9343:1988 Pliers and nippers - Slip joint pliers - Dimensions and test values
ISO 29022:2013 Dentistry.Adhesion.Notched-edge shear bond strength test
ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values

AIA/NAS - Aerospace Industries Association of America Inc.

NA0019-0024-1978 Rivet@ Solid-Countersunk 100 Degree Shear Head@ Aluminum and Aluminum Alloy@ Metric
NAS1097-1968 Rivet@ Solid - 100 Degree Flush Shear Head@ Aluminum Alloy (Rev 4)
NAS1097-1983 Rivet@ Solid - 100 Degree Flush Shear Head@ Aluminum Alloy@ Titanium Columbium Alloy (Rev 6)
NAS1097-1985 Rivet@ Solid - 100 Degree Flush Shear Head@ Aluminum Alloy@ Titanium Columbium Alloy (Rev 7)
NAS1097-1988 Rivet@ Solid - 100 Degree Flush Shear Head@ Aluminum Alloy@Titanium Columbium Alloy (Rev 8)
NAS1097-1982 Rivet@ Solid - 100 Degree Flush Shear Head@ Aluminum Alloy@ Titanium Columbium Alloy (Rev 5)
NAS1097-2018 RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 11)
NAS1097-2012 RIVET@ SOLID@ 100° FLUSH SHEAR HEAD@ ALUMINUM ALLOY@ TITANIUM COLUMBIUM ALLOY (Rev 10)
NA0019-0024-2011 RIVET@ SOLID@ COUNTERSUNK@ 100° SHEAR HEAD@ ALUMINUM AND ALUMINUM ALLOY@ METRIC (REV 1)
NAS1097-1993 Rivet@ Solid@ 100 Deg. Flush Shear Head@ Aluminum Alloy@ Titanium Columbium Alloy (Rev 9)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NA 0023-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0019-0024-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0020-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0024-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0019-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0022-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA/NAS NA 0021-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric

RO-ASRO

STAS 9159-1989 PLYWOOD Shearing strength determination
STAS 2161-1987 PANKT, Ddmniiuilion of slicarin^ slri'iiL?th ol j?lue joinl
STAS 11403/2-1991 Aluminium alloy strips dimensions
STAS 8652/2-1980 ALUMINIUM ALLOY SHEETS Dimensions
STAS 8656-1980 ALUMINIUM ALLOY PLAT BARS Dimensions
STAS 5114-1985 Beech glued wood DETERMINATION OF SIIEARING STRENGTH OF GLUE JOINT
STAS 9781/2-1989 EXTRUDED ROTIND PIPKS OF ALUMINIUM AND ALUMINIUM ALLOYS Dimensions
STAS 8870-1980 ALUMINIUM AND ALUMINIUM ALLOY EXTRUDED CHANNELS Dimensions
STAS 9255-1980 EXTRUDED T - BEAMS OF ALUMINIUM AND ALUMINIUM ALLOYS Dimensions
STAS 11531/2-1984 ALUMINIUM ALLOYS TUBES FOR IRRIGATIONS Dimensions
STAS 10590/3-1976 ALUMINIUM ALLOY DRAWN SQUAKE BARS Dimensions
STAS 10590/2-1976 ALUMINIUM ALLOY DRAWN ROUND BARS Dimensions

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 4525-1998 Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing (Edition P1)
PREN 3238-1993 Aerospace Series Test Methods for Metallic Materials Except Aluminium and Aluminium Alloys Shear Test for Wires and Rivets

RU-GOST R

GOST R 57728-2017 Polymer composites. Determination of shear strength of adhesive bond by the block-shear method
GOST 9624-2009 Laminated glued wood. Method for determination of shear strength
GOST 9624-1993 Laminated glued wood method for determination of shear strength
GOST 18938-1973 Solid carbide-tipped conical end milling cutters for cutting hardworking steels and alloys. Design and dimensions
GOST 18948-1973 Cylindrical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions
GOST 18944-1973 Spherical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions
GOST 18937-1973 Solid carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions
GOST 18942-1973 Elongated carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions
GOST 18945-1973 Spherical ellipsoidal end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions
GOST 18934-1973 Solid carbide-tipped spherical bulb-type end milling cutters for cutting hardworking steels and alloys. Design and dimensions
GOST 18939-1973 Elongated carbide-tipped spherical bulb-type and milling cutters for cutting hardworking steels and alloys. Design and dimensions

British Standards Institution (BSI)

BS EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
BS EN ISO 9653:2000 Adhesives - Test method for shear strength of adhesive bonds
BS EN ISO 10123:2019 Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
BS ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
BS EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method
BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
BS EN ISO 14273:2001 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
BS ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
BS ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
BS ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
BS ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values

GSO

GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds
GSO ISO 10123:2013 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
OS GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds
OS GSO ISO 10123:2013 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
GSO ISO 19212:2013 Adhesives - Determination of temperature dependence of shear strength
BH GSO ISO 19212:2016 Adhesives - Determination of temperature dependence of shear strength
OS GSO ISO 12579:2014 Timber structures -- Glued laminated timber -- Method of test for shear strength of glue lines
BH GSO ISO 12579:2016 Timber structures -- Glued laminated timber -- Method of test for shear strength of glue lines

Danish Standards Foundation

DS/EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
DS/EN 15337:2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
DS/EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
DS/EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

ES-UNE

UNE-EN ISO 10123:2020 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)

AENOR

UNE-EN 15337:2008 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)
UNE-EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)
UNE-EN ISO 9653:2001 ADHESIVES. TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS. (ISO 9653:1998)
UNE-EN ISO 13445:2007 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)

Lithuanian Standards Office

LST EN 15337-2007 Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)
LST EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)
LST EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
LST EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)

CZ-CSN

CSN 42 7110-1971 Aluminium and aluminium alloy blocks. Dimensions
CSN 66 8510-1960 Method of test for strength properties of adhesives in shear by tension loading (metal to metal)
CSN 42 7805-1985 Aluminium and aluminium alloys profiles. Dimensions
CSN 42 7302-1992 Hot rolled aluminium and aluminium alloy sheets. Dimensions
CSN 42 7610-1986 Aluminium and aluminium alloys. Cold drawn round rods. Dimensions
CSN 42 7620-1986 Aluminium and aluminium alloys. Cold drawn square rods. Dimensions
CSN 42 7714-1989 Round hot pressed tubes of aluminium and aluminium alloys. Dimensions
CSN 42 7130-1971 Aluminium and aluminium alloy flat castings. Dimensions
CSN 42 7305-1992 Cold rolled aluminium and aluminium alloy strips. Dimensions
CSN 42 7624-1986 Aluminium and aluminium alloys. Cold drawn flat rods. Dimensions
CSN 42 7510-1986 Aluminium and aluminium alloys. Extruded round rods Dimensions
CSN 42 7520-1986 Aluminium and aluminium alloys. Extruded square rods. Dimensions
CSN 42 7524-1986 Aluminium and aluminium alloys. Extruded flat rods. Dimensions
CSN 49 0173-1966 Determination of shear strength of a glue joint in the plane of layers

BE-NBN

NBN I 08-001-1976 Aluminum alloy ladder quality, size, testing

Standard Association of Australia （SAA）

AS/NZS 4056.7:1992 Pliers and nippers - End cutting nippers - Dimensions and test values
AS/NZS 4056.12:1992 Pliers and nippers - Slip joint pliers - Dimensions and test values
AS/NZS 4056.9:1992 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
AS/NZS 4056.6:1992 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box

European Committee for Standardization (CEN)

EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing ISO 14323:2006
EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
PD CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test

VN-TCVN

TCVN 1087-1990 Combined shearing presses.Types, basic parameters and dimensions

SE-SIS

SIS SS 27 11 14-1986 Metal sheet jointing — Determination of shearing strength
SIS SS 02 71 27-1991 Geotechnical tests — Shear strength — Direct simple shear test, CU- and CD-tests — Cohesive soil
SIS SS 23 01 08-1984 Glued timber structures - Determination of joint-strength in shear

GOSTR

GOST 12248.1-2020 Soils. Determination of strength parameters by shear strength testing
GOST R 57968-2017 Polymer composites. Test method of samples for shearing

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2071-1989 Sheets in Aluminium and Aluminium Alloys - Thickness A Less Than or Equal to 6 mm - Dimensions (C6/A01)

Japanese Industrial Standards Committee (JISC)

JIS K 6855:1994 Testing methods for impact shear strength of adhesive bonds
JIS Z 3136:1999 Specimen dimensions and procedure for shear testing resistance spot and embossed projection welded joints
JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method

Aerospace Industries Association

AIA NA 0021-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0019-0024-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0022-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0019-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0020-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0024-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric
AIA NA 0023-1978 Rivet, Solid-Countersunk 100 Degree Shear Head, Aluminum and Aluminum Alloy, Metric

YU-JUS

JUS D.A8.067-1985 Testing of plywood. Determination shear strength in adhesines layer ,

IN-BIS

IS 2525-1982 Processing dimensions of aluminum alloy and aluminum alloy wire
IS 1734 Pt.4-1983 Test methods for plywood Part 4 Determination of glue shear strength
IS 2678-1972 Processing dimensions of aluminum alloy and aluminum alloy drawn tubes
IS 11040-1984 Dimensions of forged aluminum alloy and aluminum alloy welded pipes
IS 1734 Pt.14-1983 Test methods for plywood Part 14 Determination of shear strength of panels
IS 2673-1979 Dimensions of forged aluminum alloy and aluminum alloy extruded round tubes

Indonesia Standards

SNI 03-2487-1991 Cohesive soils, Field test method for vane shear strength

SAE - SAE International

SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice

American Society of Mechanical Engineers (ASME)

ASME B94.53-1978(R1984) Solid Steel Rectangular Metal Cutting Squaring Shear Knives-Dimensional Tolerances
ASME B94.53-1978 Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances

Society of Automotive Engineers (SAE)

SAE J1523-2012 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives

TR-TSE

TS 1855-1975 RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH

Others: