Water particle size distribution detection

Water particle size distribution detection, Total:166 items.

The international standard classification for "Water particle size distribution detection" includes: Protection against dangerous goods , Particle size analysis. sieving .

The Chinese standard classification for "Water particle size distribution detection" includes: Marking, packaging, transport and storage in general , Sieving, Sieve Plate and Sieve Screen .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22231-2008 Particle size distribution/fibre length and diameter distributions
GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle size/diameters and moments from particle size distibutions
GB/T 43502.1-2023 Natural gas—Determination of particulate matter—Part 1:Determination of particle size distribution by optical method

未注明发布机构

DIN EN ISO 17892-4 E:2014-08 Laboratory examination of soils for geotechnical investigation and examination Part 4: Determination of particle size distribution (draft)
DIN ISO 9276-2 E:2018-01 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions

Professional Standard - Agriculture

124药典四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
2354药典二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
143药典四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
199药典三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47
845兽药典一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
218药典三部-2020 Physical examination method 0982 Particle size and particle size distribution method

农业农村部

NY/T 1860.32-2016 Guidelines on the determination of physico-chemical properties of pesticides. Part 32:Particle size distribution

Taiwan Provincial Standard of the People's Republic of China

CNS 14313-1999 Method of test for particle size distribution of fine ceramic podwer by liquid photosedimentation method
CNS 14316-1999 General rules of the sample preparation for particle size analysis of fine ceramic raw powder

National Metrological Verification Regulations of the People's Republic of China

JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations

PL-PKN

PN C04424-1970 Pigmen?? Determination ot particie size ditlribution
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-05-1985 Pigments Determination of particie size distribution Flow-out single drop of suspension

SE-SIS

SIS SS 13 21 12-1978 Concrete testing — Aggregate — Particle size distribution
SIS SS 02 71 23-1992 Geotechnical tests — Particle size distribution — Sieving
SIS SS 13 21 23-1983 Concrete testing - Aggregate - Particle size distribution by sieving
SIS SS 02 71 24-1992 Geotechnical tests — Particle size distribution — Sedimentation, hydrometer method

Korean Agency for Technology and Standards (KATS)

KS A 0095-2007 Determination of particle size distribution by the weight of sedimentation in liquid
KS M 5976-2003 TEST METHOD FOR PARTICLE SIZE AND DISTRIBUTION OF POWDER COATING
KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS A 0509-2004 DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY THE SEDIMENTATION IN LIQUID USING THE PIPPETTE APPARATUS
KS E ISO 4701:2009 Iron ores and direct reduced iron－Determination of size distribution by sieving
KS A ISO 9276-2-2019 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS M ISO 15825-2022 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry

RU-GOST R

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution

International Organization for Standardization (ISO)

ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 21501-3:2007 Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
ISO 21501-2:2007 Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Part 1: Light scattering aerosol spectrometer
ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method
ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 21501-4:2018 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
ISO 19430:2016 Particle size analysis - Particle tracking analysis (PTA) method
ISO 21501-4:2018/Amd 1:2023 Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1
ISO/CD 21501-1:2024 Determination of particle size distribution
ISO 6344-3:1998 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 20927:2019 Rubber compounding ingredients — Precipitated silica — Determination of aggregate size distribution by disc centrifuge
ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 17190-3:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 3: Test method for determination of the particle size distribution by sieve fractionation
ISO 6344-1:1998 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test

American Society for Testing and Materials (ASTM)

ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber

GSO

GSO ISO 15900:2013 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles
BH GSO ISO 15900:2016 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles
OS GSO ISO 15900:2013 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles
GSO ISO 9276-2:2013 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
OS GSO ISO 9276-2:2013 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
BH GSO ISO 9276-2:2016 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
GSO ISO 15825:2021 Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry
BH GSO ISO 15825:2022 Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry

AENOR

UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.

Association Francaise de Normalisation

NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF T45-153*NF ISO 8511:2011 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
NF X31-107:2003 Soil quality - Determination of the particle size distribution of soil particles - Pipette method
NF P18-622-1:1997 Tests for geometrical properties of aggregates. Part 1 : determination of particle size distribution. Sieving method.
XP CEN/TS 17434:2020 Ambient air - Determination of the particle size distribution of an atmospheric aerosol using an electrical mobility particle size spectrometer (MPSS)
NF EN 15428:2007 Soil amendments and growing media - Determination of particle size distribution
XP CEN ISO/TS 19590:2019 Nanotechnologies - Particle size distribution and concentration of inorganic nanoparticles in an aqueous medium by induced plasma mass spectrometry in single particle mode
NF ISO 11277:2020 Soil quality - Determination of the particle size distribution of mineral matter in soils - Sieving and sedimentation method
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
NF T45-156:2015 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disk centrifuge photosedimentometry

British Standards Institution (BSI)

BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS ISO 8486-1:1997 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 8486-1:1996 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS ISO 4701:2008 Iron ores and direct reduced iron. Determination of size distribution by sieving
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals
BS ISO 19430:2016 Particle size analysis. Particle tracking analysis (PTA) method
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation

Danish Standards Foundation

DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy

SCC

DIN EN 16126 E:2010 Draft Document - Solid biofuels - Determination of the particle size distribution of disintegrated pellets; German version prEN 16126:2010
DANSK DS/EN ISO 17830:2016 Solid biofuels – Particle size distrstørrelsebution of disintegrated pellets
BS PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
SN-CEN/TS 17434:2020 Ambient air — Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
DANSK DS/CEN/TS 17434:2020 Ambient air – Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
UNE 146300:1999 EX TESTS OF AGGREGATES. PARTICLE SIZE DISTRIBUTION OF FILLER BY SIEVING METHOD.
DANSK DS/ISO 9276-2:2014 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
DANSK DS/ISO 13319-1:2021 Determination of particle size distribution – Electrical sensing zone method – Part 1: Aperture/orifice tube method
UNE-EN 933-1:1998 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. SIEVING METHOD.
DIN CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
VDI 3867 BLATT 5-2013 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Time of flight spectrometer
AWWA JAW19476 Journal AWWA — Influence of Floc Size Distribution on Clarification
VDI 3867 BLATT 4-2011 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Optical aerosol spectrometer
VDI 3867 BLATT 4-2011 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Optical aerosol spectrometer
VDI 3867 BLATT 2-2008 Measuring particles in the outside air — Characterization of test aerosols — Determination of particle number concentration and number size distribution — Condensation particle counter (CPC)
VDI 3867 BLATT 3-2012 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Electrical mobility spectrometer
12/30269757 DC BS ISO 9276-2. Representation of results of particle size analysis. Part 2. Calculation of average particle sizes/diameters and moments from particle size distributions
DANSK DS/EN 933-2:2020 Tests for geometrical properties of aggregates – Part 2: Determination of particle size distribution – Test sieves, nominal size of apertures

Universal Oil Products Company (UOP)

UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

Japanese Industrial Standards Committee (JISC)

JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method

German Institute for Standardization

DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN EN ISO 17892-4:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016); German version EN ISO 17892-4:2016
DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02

ES-UNE

UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures

YU-JUS

JUS B.B8.105-1984 Testing of mineral filher. The deter,omatopm of grain sin distribution
JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion

European Committee for Standardization (CEN)

prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)
prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion

AT-ON

ONORM L 1061-2-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils - Part 2: Feinboden
ONORM L 1061-1-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils-Part 1: Coarse soil

Indonesia Standards

SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods

CZ-CSN

CSN 72 1172-1967 Determination of grain size distribution and of grain form of aggregates

Malaysia Standards

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

HU-MSZT

MSZ 22510/2-1982 Grain size diamond or boron nitride. Coarse grain inspection of designation and particle size distribution

Others: