son za

son za, Total:60 items.

The international standard classification for "son za" includes: .

The Chinese standard classification for "son za" includes: .

CZ-CSN

CSN 79 6595 Za-1989 Czech Standard 79 6595 Box
CSN 49 3341 Za-1972 Revision a- 9/1972 Czech National Standard 49 3341 Baskets and half-baskets for fruits and vegetables
CSN 02 3311 Za-1987 Czech National Standard 02 3311 Roller Chain Specifications
CSN 02 3315 Za-1987 Czech national standard 02 3315 long roller chain spacing specifications
CSN 02 4645 Za-1989 Czech national standard 02 4645 *Roller bearing. Single row ball bearing
CSN 35 8940 Za-1985 Revision a. 2/1985 Czech National Standard 35 8940 Sleeves for electron tubes. common standards
CSN 42 8316 Za-1983 Revision a) - 7/1983 Czech National Standard 42 8316 Specification for Nickel and Nickel Alloy Plates and Strips
CSN 70 0020 Za-1985 Revision a- 8/1985 Czech National Standard 70 0020/ST SEV 2051-79 Defects of electronic glass products. name
CSN 16 0210 Za-1986 Revision a-2/1986 Czech National Standard 16 0210 Round cans made of tinned iron
CSN 02 4607 Za-1985 Czech national standard 024607/ST SEV 279383 roller bearing. Calculation method of dynamic load carrying capacity and durability
CSN 40 1112 Za-1990 Revision a. 8/1990 Czech National Standard 40 1112VST 3440-81 General technical conditions for radiation electron accelerators
CSN 69 5159 Za-1989 Revision a-2/1989 Czech National Standard 69 5159 Chemical Plant Membrane Rotor Waste
CSN 36 7000 Za-1986 Revision a. 7/1986 Czech National Standard 36 7000 ★ /ST SEV 3194-81 Consumer electronic equipment. Safety regulations. Test Methods
CSN 35 8804 Za-1989 Revision a. 8/1989 Czech National Standard 35 8804 * / ST SEV 3992-83 Semiconductor optoelectronic devices for equipment. General technical conditions
CSN 36 9307 Za-1984 A single system of electronic computers. Revision a. 5/1984 Czech National Standard 36 9307 ★ /ST SEV 2099-80 Computer Test Method
CSN 42 0633 Za-1986 Revised a-10/1986 Czech National Standard 42 0633, Part 4/917-78 Chemical Analysis of Non-ferrous Metals and Alloys. cadmium. Determination of iron by atomic absorption and photometry

SE-SIS

SIS SMS 1870-1972 Worms. Type ZA, ZN, Zl, ZK

Danish Standards Foundation

DS/EN 13658-2/ZA:2008 Metal lath and beads – Definitions, requirements and test methods – Part 2: External rendering
DS/EN 13407/ZA:2007 Wall-hung urinals - Functional requirements and test methods
DS/EN 15258/ZA:2008 Precast concrete products - Retaining wall elements
DS/EN 1125/ZA:2009 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
DS/EN 14904/ZA:2007 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
DS/EN 13963/ZA:2008 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
DS/EN 13915/ZA:2008 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
DS/EN 14246/ZA:2007 Gypsum elements for suspended ceilings - Definitions, requirements and test methods
DS/EN 10340/ZA:2008 Steel castings for structural uses
DS/EN 13950/ZA:2007 Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods
DS/EN 14195/ZA:2008 Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods
DS/EN 1057/ZA:2007 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
DS/EN 1873/ZA:2007 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
DS/EN 14967/ZA:2007 Flexible sheets for waterproofing – Bitumen damp proof courses – Definitions and characteristics
DS/EN 15274/ZA:2008 General purpose adhesives for structural assembly - Requirements and test methods
DS/EN 13341+A1/ZA:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an
DS/EN ISO 14122-4/ZA+ZB:2011 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
DS/EN 14814/ZA:2008 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
DS/EN 14782/ZA:2007 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
DS/EN 14964/ZA:2007 Rigid underlays for discontinuous roofing - Definitions and characteristics
DS/EN 15275/ZA:2008 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
DS/EN 179/ZA:2009 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
DS/EN 14545/ZA:2010 Timber structures - Connectors - Requirements
DS/EN 14190/ZA:2008 Gypsum plasterboard products from reprocessing – Definitions, requirements and test methods
DS/EN 516/ZA:2007 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
DS/EN 517/ZA:2007 Prefabricated accessories for roofing - Roof safety hooks
DS/EN 10311/ZA:2007 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
DS/EN 14800/ZA:2008 Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels
DS/EN 14846/ZA:2009 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
DS/EN 14963/ZA:2007 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
DS/EN 15250/ZA:2009 Slow heat release appliances fired by solid fuel - Requirements and test methods
DS/EN 15088/ZA:2007 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
DS/EN 15266/ZA:2008 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
DS/EN 15435/ZA:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
DS/EN 14209/ZA:2007 Preformed plasterboard cornices - Definitions, requirements and test methods

SCC

DANSK DS/EN 13658-1/ZA:2005 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering

IECQ - IEC: Quality Assessment System for Electronic Components

QC 300401/ZA 0001 IS 1.1-1989 Detail Specification: Boxed Capacitors for Use in Electronic Equipment Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors Assessment Level E
QC 300401/ZA 0002 IS 1.1-1989 Detail Specification: Epoxy Dipped Capacitors for Use in Electronic Equipment Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors Assessment Level E
QC 300401/ZA 0003 IS 1.1-1989 Detail Specification: Miniature Epoxy Dipped Capacitors for Use in Electronic Equipment Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors Assessment Level E

American Society for Testing and Materials (ASTM)

ASTM B86-10a Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B86-23 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B86-13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

FI-SFS

SFS 3658-1976 gear. spiral shape. Thread shape ZA, ZN, Zl, ZK

Others: za3300,za-3300,za,original za,son za,kettle za,za-3000,za 3000,Ultraviolet za,za spring and autumn,Laoza,degree za,light za,deuterium za,time za,cum za,za palm,Dragon Boat Festival,if za