Thermoformed polystyrene production and

Thermoformed polystyrene production and, Total:165 items.

The international standard classification for "Thermoformed polystyrene production and" includes: food products in general , Plastics pipes , Rubber , Thermoplastic materials , Cellular materials , Rubber and plastics products , Films and sheets , Thermal and sound insulating materials .

The Chinese standard classification for "Thermoformed polystyrene production and" includes: Food sanitation , Plastic profile , Basic standard and general method for synthetic rubber , Synthetic resin and plastic , Labor safety technology in general , Synthetic rubber , Basic standards and general methods for synthetic resin and plastic , Heat insulation, sound absorption, light fireproof material .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 17327-1998 Hygienic Standard for acrylonitrile-styrene products used as food containers and packaging materials
GB/T 10801.1-2002 polystyrene foam board for thermal insulation
GB 9689-1988 Hygienic STANDARD for polystyrene products used as food containers and table wares
GB/T 8658-1998 Rubber, raw styrene-butadiene, emulsion - Polymerized - Determination of bound styrene content-Refractive index method
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
GB 9687-1988 Hygienic STANDARD for polyethylene products used as food containers and table wares
GB/T 5009.60-2003 Method for Analysis of Hygienic Standard of Products of Polyethylene, Polystyrene and Polypropyrene for Food Packaging
GB/T 5009.60-1996 Method for analysis of hygienic standard of products of polyethylene polystyrene and polypropyrene for food packaging
GB/T 5009.100-2003 Method for analysis of hygienic standard of products of foamed polystyrene for food packaging
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
GB 9681-1988 Hygienic STANDARD of products of polyvinyl chloride for food packaging
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
GB/T 29645-2013 Plastics—Recycled polystyrene compound

Taiwan Provincial Standard of the People's Republic of China

CNS 4013-1976 Method of Test for Polystyrene Moulding Materials
CNS 2536-1992 Method of Test for Thermal Insulation Material Made of Polystyrene Foam
CNS 2535-1992 Thermal Insulation Material Made of Polystyrene Foam
CNS 3918-1976 Polystyrene Moulding Materials (for General Use)

未注明发布机构

CAN/ULC-S701.1:2017 STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS
DIN EN 16809-1 E:2015-01 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation
DIN EN 16809-2 E:2015-01 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation
DIN EN 16809-1 E:2018-07 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation

Group Standards of the People's Republic of China

T/JSBC 4-2020 Recycled polystyrene compound
T/SDSCCE 044-2022 By-product sodium bromide from bromination reation in bromopolystyrene and tetrabromophthalic anhydride production
T/QGCML 666-2023 Technical specifications for the production of polystyrene foam crushing vehicles
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics

Professional Standard - Light Industry

QB 1110-1991 Safety Procedure in Manufacturing Polyurethane, Polystyrene and Polyethylene Foam Plastic
QB/T 3807-1999 Cellular plastics. Polystyrene foam for thermal insulation

Professional Standard - Agriculture

GB/T 13119-1991 Method for analysis of hygienic standard of products of foamed polystyrene for food packaging
GBn 84-1980 Hygienic Standards for Polyethylene Molded Products

Professional Standard - Machinery

JB/T 53124-1999 Expandable polystyrene foam molding machine product quality classification
JB/T 5293-1991 Expandable Polystyrene Foamed Plastics Forming Machine
JB/T 5293-2013 EPS Automatic shape moulding machine
JB/T 11345-2013 EPS Block Molding Machinery

Professional Standard - Commodity Inspection

SN/T 1891.5-2007 Hygienic standard for import and export microwave food containers and packaging materials - Part 5: Products of polystyrene
SN/T 1888.7-2007 Hygienic standard for export and import irradiated food containers and packaging materials - Part 7: Products of polystyrene

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 37388-2019 Solution-polymerized styrene butadiene rubber(SSBR)

工业和信息化部

QB/T 5153-2017 Recycled polystyrene extrusion foaming wire-rod

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34849-2017 Biaxially oriented polystyrene heat shrinkable film

住房和城乡建设部

JG/T 536-2017 Thermosetting composite polystyrene foam insulation board

Korean Agency for Technology and Standards (KATS)

KS M 3158-1997 polystyrene molding material
KS M 3360-2002 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M 3360-1981 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M 3845-2020 Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS I 3245-2016 Recycled foam polystyrene heat insulating materials for windows and door
KS I 3245-2014 Recycled foam polystyrene heat insulating materials for windows and door
KS M 3842-2020 Plastics－Recycled moulding materials－Polyetylene(PE)
KS M 3806-2005 RECYCLED FOAM POLYSTYRENE AGGREAGATE
KS M 3808-2021 Cellular polystyrene(PS) for thermal insulation
KS M 3844-2020 Plastics－Recycled moulding materials－Polyvinyl chloride(PVC)
KS M 3807-2005 Recycled foam polystyrene thermal insulation material
KS M 3808-2020 Cellular polystyrene(PS) for thermal insulation
KS F 2231-1999 Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards

IN-BIS

IS 2267-1972 Specification for polystyrene molding materials
IS 4671-1984 Specification for expanded polystyrene for thermal insulation
IS 5189-1985 Specification for cold polymerized raw styrene-butadiene rubber
IS 5188-1985 Specification for cold polymerization oil modified raw styrene butadiene rubber

(U.S.) Ford Automotive Standards

FORD WSB-M4D844-A11-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND
FORD WSB-M4D844-A8-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND
FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND
FORD WSK-M4D905-A1-1996 ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND
FORD ESB-M4G69-A-1986 POLYVINYL CHLORIDE MOLDING COMPOUND
FORD WSS-M4D827-A3-1995 ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND
FORD WSB-M4D844-A10-2010 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SJ-M4D9792-B-1994 ABS MOULDING COMPOUND, VERY HIGH HEAT RESISTANT (Shown on SJ-M4D9792-A)
FORD ESA-M4D434-A1-2000 STYRENE MALEIC ANHYDRIDE TERPOLYMER (SMA), MODIFIED MOLDING COMPOUND, GENERAL PURPOSE
FORD ESB-M4D400-A-1979 LAMINATE RIGID POLYSTYRENE, FOAM/FILM- THERMOFORMABLE, HEADLINING SUBSTRATE

Association Francaise de Normalisation

NF EN 16809-1:2019 Thermal insulating products intended for buildings - Products formed on site from bulk expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: specification of products with and without binder before...
NF EN 16809-2:2017 Thermal insulating products intended for buildings - Products formed on site from bulk expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: specification for bonded and bulk products after...
NF P75-405/IN1*NF EN 13164/IN1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
NF P75-405*NF EN 13164+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
NF P75-405:2012 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
NF P75-480-2*NF EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2 : specification for the bonded and loose-fill products after installation
NF EN 14309:2016 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en polystyrène expansé (PSE) - Spécification
NF EN 13163+A2:2017 Produits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - Spécification
NF EN 13163/IN2:2017 Produits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - Spécification

German Institute for Standardization

DIN EN 16809-1:2020-02 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation; German version...
DIN EN 16809-2:2017-04 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version ...
DIN EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version EN

SCC

AS K188:1971 Extruded polystyrene sheet for thermoforming processes
BS EN 13163:2008 Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS). Specification
UNE-EN 13163:2002 Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS) . Specification.
BS EN 13163:2012+A1:2015 Thermal insulation products for buildings. Factory made expanded polystyrene (EPS) products. Specification
CAN/ULC-S701.1:2022 STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS
ULC 701.1-2017 Standard for Thermal Insulation, Polystyrene Boards
BS EN 13164:2008 Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
10/30213962 DC BS EN 13163. Thermal insulation products for buildings. Factory made expanded polystyrene (EPS) products. Specification
AS K156:1965 Expanded polystyrene for thermal insulation
AENOR UNE-EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation
NS-EN 16809-2:2017 Thermal insulation products of buildings — In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads — Part 2: Specification for the bonded and loose-fill products after installation
DANSK DS/EN 16809-1:2019 Thermal insulation products of buildings – In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads – Part 1: Specification for the bonded and loose-fill products before installation
UNE-EN 13164:2002 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification.
NS-EN 16809-1:2019 Thermal insulation products of buildings — In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads — Part 1: Specification for the bonded and loose-fill products before installation
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DANSK DS/EN 16809-2:2017 Thermal insulation products of buildings – In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads – Part 2: Specification for the bonded and loose-fill products after installation
DIN EN 16809-2 E:2015 Draft Document - Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation...
DIN EN 16809-1 E:2018 Draft Document - Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installatio...
BS 3837:1965 Specification for expanded polystyrene board for thermal insulation purposes
08/30169537 DC BS EN 13164. Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
AENOR UNE-EN 13163+A1:2015 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification
DANSK DS/EN 13163+A2:2016 Thermal insulation products for buildings – Factory made expanded polystyrene (EPS) products – Specification
NS-EN 13163:2001 Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification
NS-EN 13163:2012+A2:2016 Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification

SE-SIS

SIS 16 66 60-1966 Styrene moulding and extrusion compounds. General information
SIS 16 66 51-1966 Polystyrene moulding and extrusion compounds
SIS 16 66 52-1966 Styrene-acrylonitrile copolymer moulding and extrusion compounds
SIS 16 66 53-1966 Acrylonilrile-butadiene-slyrene (ABS) moulding and extrusion compounds
SIS 16 66 54-1966 Styrene-butadiene moulding and extrusion compounds

GOST

GOST 15588-1970 Thermal insulation boards made of polystyrene foam

SAE - SAE International

SAE AMS3620B-1984 PLASTIC MOLDINGS & EXTRUSIONS POLYSTYRENE

United States Navy

NAVY MIL-P-19644 C-1970 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)
NAVY MIL-P-19644 C INT AMD 1-1991 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)

European Committee for Standardization (CEN)

PD CEN/TR 15985:2010 Thermal insulating products - Factory made products of expanded polystyrene (EPS) - Voluntary certification of the raw material
EN 14309:2009 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification (Incorporates Amendment A1: 2013)
EN 13163:2012 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification (Incorporates Amendment A1: 2015)
EN 13164:2012 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification (Incorporates Amendment A1: 2015)

British Standards Institution (BSI)

BS PD CEN/TR 15985:2010 Thermal insulating products — Factory made products of expanded polystyrene (EPS) — Voluntary certification of the raw material
BS EN 16809-2:2017 Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads. Specification for the bonded and loose-fill products after installation
BS EN 16809-1:2019 Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Specification for the bonded and loose-fill products before installation
18/30375812 DC BS EN 13163 AMD3. Thermal insulation products for buildings. Factory made expanded polystyrene (EPS) products. Specification
BS EN 14309:2009 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
14/30282878 DC BS EN 16809-1. Thermal insulation products for buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads. Part 1. Specification for the bonded and loose filled products before…
18/30375815 DC BS EN 13164 AMD2. Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification
18/30366774 DC BS EN WI 00088424. Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads. Part 1. Specification for the bonded and loose-fill products before installation

U.S. Military Regulations and Norms

ARMY MIL-P-60312C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312 C NOTICE 2-2009 PARTS, MOLDED, PLASTIC FORM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-14571 A-1960 PLASTIC, POLYSTYRENE, MODIFIED; FABRICATED PARTS

PL-PKN

PN-EN 16809-1-2020-04 P Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 1: Specification for the bonded and loose-fill products before installation
PN-EN 16809-1-2020-04/Ap1-2021-08 E Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 1: Specification for the bonded and loose-fill products before installation
PN-EN 16809-2-2017-02/Ap1-2021-08 E Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 2: Specification for the bonded and loose-fill products after installation

RU-GOST R

GOST 23492-1983 Synthetic rubbers, butadiene-styrene SKS-30ARKPN and butadiene-methylstyrene SKMS-30ARKPN. Specifications
GOST 20326-1974 Disk type milling cutters for cutting organic glass, polyethylene and polysterene. Construction and dimensions

GOSTR

GOST 23492-2019 Butadiene-methylstyrene SKMS-30ARKPN and butadiene-styrene SKS-30ARKPN rubbers. Specifications

American Society for Testing and Materials (ASTM)

ASTM D4549-15 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D6339-05 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM D6339-04 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)

GM Europe

GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME STD 518736-1996 TPE 8736 SEBS+PP TPE 8736 SEBS+PP English/Swedish
GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German

IL-SII

S.I.634-1967 RIGID FOAMED POLYSTYRENE FOR THERMAL INSULATION

GM Daewoo

GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer

CEN - European Committee for Standardization

EN 14309:2015 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
PREN 16809-1-2018 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation
EN 13163:2008 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN 13164:2008 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification

ES-UNE

UNE-EN 16809-1:2020 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation

CZ-CSN

CSN 64 3000-1979 Polystyrene thermo- plastics. General requirements
CSN 64 0321-1963 Testing of polystyrene hermoplastics

AENOR

UNE-EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation

International Organization for Standardization (ISO)

ISO 2453:1991 Rubber, raw styrene-butadiene, emulsion-polymerized; determination of bound styrene content; refractive index method
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —

DIN

DIN EN 16809-1:2020 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation

GM Holden Ltd

HOLDEN HN 2476-2006 ELASTOMER ?THERMOPLASTIC - STYRENIC TYPE SEBS, 75 SHORE A

GM North America

GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers

GSO

GSO ISO 2453:2015 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
GSO 1015:1998 EXPANDED POLYSTYRENE INSULATION BOARDS PART 2: EXTRUDED BOARDS

Association of German Mechanical Engineers

DVS 2215-2-1995 Heating element welding for mass production of polyolefin (PE, PP) molded parts

Defense Logistics Agency

DLA A-A-59602 VALID NOTICE 1-2006 TUBE, SPIRAL WRAP, POLYETHYLENE, POLYTETRAFLUOROETHYLENE AND POLYAMIDE

IT-UNI

UNI 7066-1972 Polystyrene thermoplastic material (PS). Classification

Underwriters Laboratories (UL)

UL 651A-1995 Type EB and A rigid PVC conduit and HDPE conduit
UL 651A-1989 Type EB and A rigid PVC conduit and HDPE conduit
UL 651A-2000 UL Standard for Safety Type EB and A Rigid PVC Conduit and HDPE Conduit Fourth Edition; Revisions Through and Including September 6, 2007
UL 651A-2017 UL Standard for Safety Type EB and A Rigid PVC Conduit and HDPE Conduit

Others: