Determination of safety insulation voltage withstand

Determination of safety insulation voltage withstand, Total:116 items.

The international standard classification for "Determination of safety insulation voltage withstand" includes: Transformers. Reactors , Insulators , Power stations in general , Insulating materials in general , Motors , Cables , Insulating gases , Electrical accessories in general , Other standards related to electricity and magnetism .

The Chinese standard classification for "Determination of safety insulation voltage withstand" includes: Transformer , Insulator , Electric power testing technique , Electrical insulating material and its products , Electric rotating machinery in general , Cable and its accessory , Basic standards and general methods for adhesives , Asynchronous machine , Signal equipment .

Professional Standard - Electricity

DL/T 555-2004 Guide for withstand voltage and insulated test of gas-insulated metal-enclosure switchgear on site
DL/T 555-1994 Guide for Withstand Voltage Test of Gas-Insulated Metal-Enclosure Electric Appliance on Site
DL/T 557-2021 Insulators of ceramic or glass material overhead lines with a nominal voltage greater than 1000V- impulse puncture tests in air
DL 557-2005 Definition, test methods and criteria for impact breakdown test in air for high-voltage line insulators
DL/T 984-2018 Guidelines for judging insulation aging of oil-immersed transformers
DL/T 557-2005 Insulators of ceramic or glass material overhead lines with a nominal voltage greater than 1000V -- impulse puncture tests in air
DL/T 984-2005 Guide for the diagnosis of insulation aging in oil-immersed power transformer

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1001.1-2003 Insulators for overhead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions，test methods and acceptance criteria
GB/T 11026.2-2000 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 2: Choice of test criteria
GB/T 29311-2012 Electrical insulating materials—A.C.voltage endurance evaluation—Introduction
GB/T 14517-1993 Test method for dielectric strength of insulating adhesive tape at power frequency
GB/T 11026.2-2012 Electrical insulating materials - Thermal endurance properties - Part 2: Choice of test criteria
GB 5013.3-1997 Rubber insulated cables of rated voltages up to and including 450/750V Part 3:Heat resistant silicone insulated cables
GB/T 5013.3-2008 Rubber insulated cables of rated voltages up to and including 450/750V - Part 3: Heat resistant silicone insulated cables
GB/T 22718-2008 Thermal evaluation methods of insulation systems for high-voltage electrical machines
GB/T 11026.7-2014 Electrical Insulating Materials - Thermal Endurance Properties - Part 7: Determination of Relative Thermal Endurance Index (RTE) of Insulating Material
GB/T 1739-1979 Method of test for transformer oil resistance of electrical insulating varnish films

Professional Standard - Machinery

JB/T 7589-2007 Thermal evaluation methods of insulation systems for high-voltage electrical machines
JB/T 7082-2013 Dielectric voltage-withstand tester
JB/T 6204-2002 Specifications for Withstanding Voltage Test Oil Stator Coil and
JB/T 7082-1993 Dielectric Withstand Testing Instruments for Insulating Medium
JB/T 7589-1994 Evaluation method for heat resistance of insulation structure of high voltage motor

Taiwan Provincial Standard of the People's Republic of China

CNS 3988-2000 Dielectric Properties of Control Device
CNS 9808-1983 Method of Test for Control Gear Insulation
CNS 14256-1998 Method of test for withstand voltage of personal protective equipment and insulation devices

Professional Standard - Railway

TB/T 1448-1982 Insulation and Voltage Resistance for Communication Signal Products

Group Standards of the People's Republic of China

T/EAMA 7.3-2023 Specifications for Testing and Assessment of Wire and Cable Products Part 3: Detection and Determination of Insulation Thickness and Dimensions
T/GDWCA 0031-2018 Rated voltage 450/750V double insulation flame retardant acid and alkali resistant cable
T/CEEIA 294-2017 Thermal evaluation of high temperature electrical insulation systems of nature ester transformer

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 29311-2020 Electrical insulating materials and systems—AC voltage endurance evaluation
GB/T 1001.1-2021 Insulators for overhead lines with a nominal voltage above 1 000V—Part 1:Ceramic or glass insulator units for a.c.systems—Definitions,test methods and acceptance criteria

Professional Standard - Energy

NB/T10824-2021 Guidelines for fire resistance rating assessment of insulating materials used in converter transformers
NB/T 10824-2021 Guidle for fireproof endurance rating assessment of insulating materails for eonverter transformer

国家铁路局

TB/T 1448-2018 Isolation voltage of railway communication & signal product

Professional Standard - Chemical Industry

HG/T 3857-2006 Method of test for transformer oil resistance of electrical insulating varnish films

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1044-2015 Rated voltage 450/750V weather-resistant PVC insulated overhead wire

GSO

DL/T 557-1994 High voltage line insulator steep wave impulse withstand test - definition, test method and criterion
GSO ISO 11432:2007 Building construction - Sealants – Determination of resistance to compression
DL/T 464.4-1992 Overhead insulated wire fittings and insulating parts for rated voltage 1 kV and below (4) Wedge-type tension clamps
GSO IEC 60245-3:2007 Rubber Insulated Cables of Rated Voltages Up To and Including 450/750 V – Part 3: Heat-Resistant Silicone Insulated Cables
OS GSO IEC 60245-3:2007 Rubber Insulated Cables of Rated Voltages Up To and Including 450/750 V – Part 3: Heat-Resistant Silicone Insulated Cables
DL/T 464.1-1992 Overhead insulated wire fittings and insulating parts for rated voltage 1 kV and below (1) General provisions

SE-SIS

SIS SS IEC 814:1986 Insulating oils - Determination of water in insulating liquids by automatic coulometric Karl Fischer titration
SIS SS 404 03 21-1986 Insulating oils - Method for determination of the electric strength of insulating oils
SIS SS IEC 897:1988 Insulating liquids — Methods for the determination of the lightning impulse breakdown voltage of insulating liquids

British Standards Institution (BSI)

BS EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength
BS 7808:1995 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS 6470:1984 Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60085:2008 Electrical insulation - Thermal evaluation and designation
BS EN 61251:2016 Electrical insulating materials and systems. A.C. voltage endurance evaluation
24/30488478 DC BS IEC 60245-3 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

Japanese Industrial Standards Committee (JISC)

JIS C 9742:2000 Isolating transformers and safety isolating transformers -- Requirements
JIS C 9742 ERRATUM 1:2001 Isolating transformers and safety isolating transformers -- Requirements (Erratum 1)
JIS C 3663-3:1998 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 3: Heat resistant silicone insulated cables
JIS C 3663-3:2003 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 3: Heat resistant silicone insulated cables

RU-GOST R

GOST R IEC 60245-3-1997 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables
GOST IEC 60245-3-2011 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables
GOST 15634.4-1970 Magnet wire. Methods of the breakdown voltage test
GOST 14950-1975 Insulation construction of electrical machinery with previously insulated preformed winding sections. Test method for determination of thermal enolurance

International Electrotechnical Commission (IEC)

IEC 60216-2:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 2: choice of test criteria
IEC 60245-3:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC 60245-3:1980 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 3 : Heat resistant silicone rubber insulated cables
IEC 60245-3:1994/AMD1:1997 Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC TR2 61251:1993 Electrical insulating materials; A.C. voltage endurance evaluation; introduction
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation

BR-ABNT

ABNT 19-2.1-003-1980 Pressure resistance test of insulating refractory bricks at normal temperature
ABNT NBR NM 287-3-2009 Rubber insulated cables of rated voltages up to and including 450/750 V Part 3- Heat resistant silicone insulated cables (IEC 60245-3 MOD)

Korean Agency for Technology and Standards (KATS)

KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C IEC 60245-3-2013(2018) Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 60216-5-2014(2019) Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C IEC 60245-3:2013 Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 60245-3-2023 Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 60245-3:2005 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 3: Heat resistant silicone insulated cables
KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
KS C IEC 60216-5:2014 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
KS C IEC 60216-5-2019 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material

CZ-CSN

CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 34 7470-3-1997 Rubber insulated cable of rated voltages up to and including 450/750 V Part 3: Heat resistant silicone rubber insulated cables

European Committee for Standardization (CEN)

EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004)

TH-TISI

TIS 955.3-2008 Rubber insulated cables.rated voltages up to and including 450/750 v.part 3: heat resistant silicone insulated cables

KR-KS

KS C IEC 60245-3-2013(2023) Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables

Canadian Standards Association (CSA)

CSA E742-94-CAN/CSA-1994 Isolating Transformers and Safety Isolating Transformers General Instruction No 1

Indonesia Standards

SNI IEC 60245-3:2012 Rubber insulated cables – Rated voltages up to and including 450/750 V. Part 3: Heat resistant silicone insulated cables

American National Standards Institute （ANSI)

ANSI/ASTM D3005:2010 Specification for Low-Temperature-Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

CENELEC - European Committee for Electrotechnical Standardization

HD 22.3 S2-1983 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 3: Heat Resistant Silicone Rubber Insulated Cables

SCC

DANSK DS/HD 22.3 S4:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 3: Heat resistant silicone rubber insulated cables
DIN VDE 0282-3:2006 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 3: Heat resistant silicone rubber insulated cables; German version HD 22.3 S4:2004 + A1:2006
UNE-EN 1094-5:1996 INSULATING REFRACTORY PRODUCTS. PART 5: DETERMINATION OF COLD CRUSHING STRENGTH.
IEC TS 61251:1993 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
UNE 21027-3:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 3: Heat resistant silicone rubber insulated cables
AS 4045.2:1995 Prepared unshaped refractory materials - Insulating
CEI EN 60216-5:2012 Electrical insulating materials - Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
DANSK DS/EN 60216-5:2008 Electrical insulating materials – Thermal endurance properties – Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

CH-SNV

SN 742 400-1984 Road vehiclesTyres and rims - Technical data

Association Francaise de Normalisation

NF C32-102-3/A1:1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3 : heat resistant silicone rubber insulated cables.
NF C26-204:1986 Evaluation of electrical endurance of electrical insulation systems
NF C32-102-3:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 3 : heat resistant silicone rubber insulated cables.
NF C26-351*NF EN 61251:2016 Electrical insulating materials and systeme - A.C. voltage endurance evaluation

ZA-SANS

SANS 5913:1980 Cold crushing strength of shaped insulating refractory bricks

European Committee for Electrotechnical Standardization（CENELEC）

EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...
HD 22.3 S3/A1-1999 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables

American Society for Testing and Materials (ASTM)

ASTM D3005-24 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-17 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-10 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-99 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

ES-UNE

UNE-EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (Endorsed by AENOR in April of 2016.)

SAE - SAE International

SAE AS81824A-A1-2005 Splices@ Electric@ Permanent@ Crimp Style@ Copper@ Insulated@ Environment Resistant

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 930-1987 Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data

Underwriters Laboratories (UL)

UL 224 BULLETIN-2005 UL Standard for Safety Extruded Insulating Tubing

German Institute for Standardization

DIN EN 60216-5:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008); German version EN 60216-5:2008

Others: