GB/T 13829.3-2004 in English
VALIDGrooved pins-One-third-length centre grooved
- Issued on:2004-02-10
- Implemented on:2004-08-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$88.00
| Standard No: | GB/T 13829.3-2004 |
| Document status: | VALID |
| Title in English: | Grooved pins-One-third-length centre grooved |
| Title in Chinese: | 槽销 中部槽长为1/3全长 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2004-02-10 |
| Implemented on: | 2004-08-01 |
| Superseding: |
GB/T 13829.3-1992 Grooved pins. With round head or countersunk head
|
| Professional Classification: | GB-National Standard |
| Related Keywords: | pins-one-third-length centre
middle groove length nominal diameter d1 austenitic stainless steel full length slot pin |
| Related Topics: | Grooved pin
full length full wavelength why not tall What is the wavelength 3rd generation full length trough up trough down GB/T 13829.3 GB/T 13829.3-1992 GB/T 13829.3-2004 Minister of Science and Technology, successive ministers pin groove |
《GB/T 13829.3-2004槽销 中部槽长为1/3全长》由TC85（全国紧固件标准化技术委员会）归口，主管部门为中国机械工业联合会。
本部分规定了公称直径d1为1．5～25mm、由碳钢或奥氏体不锈钢制造的、在销中部表面有三个互成120°纵向沟槽的中部槽长为1／3全长的槽销。 扩展直径d2由沟槽每边挤出的材料形成，且d2大于d1。当槽销压入直径等于公称直径d1的钻孔时，形成局部锁紧配合(见第4章)。
Scope
This part stipulates that the nominal diameter d1 is 1.5mm ~ 25mm, made of carbon steel or austenitic stainless steel, and the middle groove length of three mutually forming 120° longitudinal grooves on the middle surface of the pin is 1/3. Full length slot pin. The expanded diameter d2 is formed by the extruded material on each side of the groove, and d2 is greater than d1. When the grooved pin is pressed into a borehole with a diameter equal to the nominal diameter d1, a partial locking fit is formed (see Chapter 4).
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 12166-1990 in English
Electrical characteristics of unbalanced voltage digital interface circuits
1990-01-12 -
GB 17325-2015 in English
National Standard on Food Safety - Condense (Juice, Pulp) for Food Industry
2015-11-13 -
GB 4234.9-2023 in English
Implants for surgery—Metallic materials—Part 9: Wrought high nitrogen stainless steel
2023-11-27 -
GB 41317-2024 in English
Stainless steel corrugated tubes for the connection of gas appliances
2024-04-29 -
GB/T 6342-1996 in English
Cellular plastics and rubbers - Determination of linear dimensions
1996-04-10 -
GB/T 38133-2019 in English
Genetically modified alfalfa detection method by real-time PCR
2019-10-18 -
GB/T 4622.1-2022 in English
Spiral wound gaskets for pipe flanges—Part 1: PN designated
2022-10-12 -
GB/T 20042.6-2024 in English
Proton exchange membrane fuel cell—Part 6:Test method of bipolar plate properties
2024-03-15 -
GB 29140-2024 in English
Norm of energy consumption per unit production of soda ash
2024-04-29 -
GB/T 16896.2-2016 in English
Instruments and software used for measurement in high-voltage and high-current tests-Part 2:Requirements for software for tests with impulse voltages and currents
2016-02-24
