GB/T 16896.2-2016 in English
VALIDInstruments and software used for measurement in high-voltage and high-current tests-Part 2:Requirements for software for tests with impulse voltages and currents
- Issued on:2016-02-24
- Implemented on:2016-09-01
- File Format:PDF
- Delivery:Via email within 5 business days
$408.00
《GB/T 16896.2-2016高电压和大电流试验测量用仪器和软件 第2部分:对冲击电压和冲击电流试验用软件的要求》由TC163(全国高电压试验技术和绝缘配合标准化技术委员会)归口,主管部门为中国电器工业协会。
Scope
This part of GB/T 16896 specifies the Impulse voltage and impulse current test waveforms and standard values. This section applies to the software for calculating the impulse voltage and impulse current parameters recorded in the impulse test. This section does not apply to hardware with built-in firmware that cannot accept external input data. This part includes: - Determine the necessary tests to show that the performance of the software meets the requirements of the relevant national standards; - Define terms related to digital processing; - Specify the standard value and acceptable limit of the standard shock wave; - Specify Requirements for performance records; -- specify methods for evaluating software components of measurement uncertainty.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB 7727.2-1987 in English
General terminology for ships; General design
1987-05-18 -

GB/T 16930.2-2021 in English
Tactile sticks -- Part 2: Performance requirements and test methods
2021-03-09 -

GB/T 13277.3-2015 in English
Compressed air — Part 3: Test methods for measurement of humidity
2015-12-31 -

GB/T 2471-2024 in English
Preferred number series for resistors and capacitors
2024-03-15 -

GB/T 8117.2-2008 in English
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
2008-07-02 -

GB/T 26333-2010 in English
Evaluation specification for security in industrial control network
2011-01-14 -

GB/T 11563-1995 in English
Motor vehicles--Procedure for H-point determination
- -

GB/T 16406-1996 in English
Acoustics - Flexural resonance testing method for damping properties of acoustical materials
1996-05-27 -

GB/T 9966.1-2020 in English
Test methods for natural stone—Part 1:Determination of dry,wet and after freezing compressive strength
2020-03-06 -

GB/T 13220-1991 in English
Determination of particle size distribution of fine powder-Method of sieve classfication with sonic wave
1991-10-05