High voltage test test instrument basis

High voltage test test instrument basis, Total:232 items.

The international standard classification for "High voltage test test instrument basis" includes: Power stations in general , Measurement of electrical and magnetic quantities , Equipment for petroleum and natural gas industries , Electrical and electronic testing , Nuclear energy engineering , Environmental testing , Optical equipment , Geology. Meteorology. Hydrology , Mechanical testing , Chemical reagents , Electrical wires and cables .

The Chinese standard classification for "High voltage test test instrument basis" includes: Electric power testing technique , Electrical instrument and meter in general , Petroleum exploration logging equipment and instrument , Petroleum exploration, development, gathering and transportation equipment in general , Electric transmission and transformation equipment in general , Nuclear instrument and detector in general , Material composition analysis instrument and environment detection instrument in general , Optical instrument in general , Environmental Condition and General Test Method , Hydrology and water conservancy instrument , Engineering investigation and geotechnical engineering in general , Physics and Mechanics , Chemical reagent in general , Wire with insulation layer , Other electric appliances , Basic standards and general methods , Cable and its accessory , Technical Management .

Professional Standard - Energy and Power Planning

DL/T 849.6-2016 General specification for special test instruments used in power equipments Part 6: High voltage resonant test device
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester
DL/T 1681-2016 High voltage test equipment matching guidelines
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 846.13-2020 General technical specifications for high voltage test equipments -Part 13: Arrester monitor tester
DL/T 846.3-2004 General technical specifications for high voltage test equipments Part 3: High voltage switch integrate detector
DL/T 846.3-2017 General technical specifications for high voltage test equipments Part 3:high voltage switch integrate detector
DL/T 1694.6-2020 Calibration specification for high voltage testing instruments一Part 6: Very low frequency dielectric loss detector for power cable
DL/T 849.6-2004 General technical specification of test instruments used for power equipments Part 6: High voltage resonant test system
DL/T 962-2005 General technical specifications of the high voltage dieletric loss detector
DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 1694.8-2021 Calibration specification for high voltage testing instruments -Part 8: Power capacitance and inductance tester
DL/T 1694.9-2021 Calibration specification for high voltage test instruments—Part 9: Power transformer no-load and load loss tester

Professional Standard - Petroleum

SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid
SY/T 5218-1991 Basic Environment Test of Instrument for Petroleum Exploration and Development - Test A: High Temperature Test
SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press
SY/T 5102-1993 Basic Environment Test of Instrument for Petroleum Exploration and Development - Test K: HTHP Test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9357-2008 Instrument for soil test - Permeameter
GB/T 11606.2-1989 The method of environmental test for analytical instruments--Line frequency and voltage test
GB/T 11606.4-1989 The method of environmental test for analysical instruments--High temperature test
GB/T 21043-2007 Instrument for soil test—Strain-controlled unconfined compression apparatus
GB/T 12746-2007 Geotechnical engineering instrument for test—Penetration test apparatus
GB/T 32065.5-2015 Environmental test methods for oceangraphic instruments―Part 5:Dry heat storage
GB/T 16896.3-2024 Instruments and software used for measurements in high-voltage and high-current tests—Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
GB/T 32065.15-2019 Environmental test methods for oceanographic instruments-Part 15:Hydrostatic pressure test
GB/T 33087-2016 Ultra pure water for instrumental analysis specification and test methods
GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
GB/T 6587.5-1986 Shock tests for electronic measuring instruments
GB/T 31228-2014 Instrumented nanoindentation test. Terminology
GB/T 16896.1-2024 Instruments and software used for measurements in high-voltage and high-current tests—Part 1: Requirements for instruments for impulse tests
GB/T 12085.8-1989 Optics and optical instruments--Environmental test methods--High pressure, low pressure, immersion
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 11606.15-1989 The method of environmental test for analytical instruments--High temperature storage test
GB/T 22458-2008 General rules of instrumented nanoindentation test
GB/T 4935.2-2009 Instrument for soil test—Oedometer—Part 2:Pneumatic oedometer
GB/T 32065.4-2015 Environmental test methods for oceanographic instruments―Part 4:Dry heat
GB/T 12085.8-2010 Optics and optical instruments—Environmental test methods—Part 8:High pressure low pressure immersion
GB/T 16896.2-2016 Instruments and software used for measurement in high-voltage and high-current tests-Part 2:Requirements for software for tests with impulse voltages and currents
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
GB/T 12085.21-2011 Optics and optical instruments—Environmental test methods—Part 21:Combined low pressure and ambient temperature or dry heat

Professional Standard - Machinery

JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 7083-1993 Impulse Voltage Testing Instruments for Low Voltage Apparatus
JB/T 4278.12-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 12:High temperature pressure test device
JB/T 6214-1992 Guideline for Reliability Validation Test and Determination Test (Exponential Distribution) for Instrumentation
JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire Part11:Breakdown voltage tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
JB/T 6214-2014 Guide to the Reliability Compliance Test and Determination Test(Exponential Distribution)of Instrumentation
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire Part13:Continuity of insulation tester(high-voltage method)
JB/T 7089-1993 High-voltage Oscilloscopes for Impact Test
JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester

Professional Standard - Geology

DZ 0039.11-1992 Condition and method for basic environment test of geological instrument product - high temperature / high-voltage comprehensive test

Professional Standard - Energy

NB/T 42102-2016 Guide to the interpretation of high voltage test techniques
NB/T 42138-2017 Guide to the high-voltage alternating-current circuit-breakers
DL/T 1694.11-2024 Specification for calibration of high voltage test instruments and equipment Part 11: Capacitance and current testers
DL/T 1694.10-2024 High voltage test instruments and equipment calibration specifications Part 10: Sulfur hexafluoride density controller calibrator

Group Standards of the People's Republic of China

T/CHES 19-2018 General Protocol for Data Interaction of Model Test Water and Sediment Measuring Instruments
T/CEC 358-2020 Test Instrument Data Transmission Protocol
T/CSEE 0359-2023 Electrical test instrument data and communication technology specification

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 074-2009 Calibration specification for high voltage switch mechanical characteristic tester
JJF 1690-2018 Calibration Specification for Polarization Dependent Loss Meters
JJF 2228-2025 Calibration Specification for Withstanding Voltage Tester Calibrators

Military Standard of the People's Republic of China-General Armament Department

GJB 595.2-1988 Environmental test methods for artillery optical instruments High temperature test
GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors
GJB 570.3-1988 Data acquisition and processing for static testing of meteorological instrument finalization test methods
GJB 570.13-1988 Meteorological instrument final test method cloud meter

Professional Standard - Ocean

HY 21.11-1992 The basic method of environmental test for oceanographic instruments - Guideline for hydrostatic pressure test
HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
HY 016.5-1992 The basic method of environmental test for oceanographic instruments—High-temperature storage test
HY 016.15-1992 The basic method of environmental test for oceanographic instruments—Hydrostatic pressure test
HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
HY 016.4-1992 High temperature test for basic environmental test methods for marine instruments
HY 016.6-1992 The basic method of environmental test for oceanographic instruments—Temperature cycling test

National Metrological Verification Regulations of the People's Republic of China

JJG 1137-2017 Verification Regulation of High Voltage Relative Dielectric Loss and Capacitance Testers
JJG 1126-2016 Verification Regulation of High-voltage Dielectric Loss Factor Tester
JJG 1120-2015 High Voltage Switch Operation Characteristic Testers

Professional Standard - Electricity

DL/T 849.6-2016(英文版) General technical requirements for test instruments for power equipment Part 6: High voltage resonance test equipment

Professional Standard - Military and Civilian Products

WJ 747-1994 High temperature test method for adhesives used in optical instruments
WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
WJ/T 747-2014 High temperature test method for glue used in optical instruments
WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

Professional Standard - Aviation

HB 6136.2-1987 Flight Test Instrument (Static) Calibration Specification Altitude
HB 6136.4-1987 Flight Test Instrument (Static) Calibration Specification Stress

Hubei Provincial Standard of the People's Republic of China

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

Professional Standard - Electron

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes

Taiwan Provincial Standard of the People's Republic of China

CNS 13986-1997 Method of test for wear resistance of fine ceramics by ball on disk method

Professional Standard - Light Industry

QB 1048-1991 Compression Strength Tester

International Electrotechnical Commission (IEC)

IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
IEC 61083-3:2020 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

Standard Association of Australia （SAA）

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
AS 4459.1:1999 Methods of sampling and testing ceramic tiles - Sampling and basis for acceptance
AS 1931.2:1996 High-voltage test techniques - Measuring systems

GCC Standardization Organization

BH GSO IEC 61083-1:2024 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
GSO ASTM F2939:2022 Standard Specification for High Voltage Phasing Testers
GSO ISO 9022-8:2013 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion

Spanish Association for Standardization (UNE)

UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.
UNE-EN 60427:2001 Synthetic testing of high-voltage alternating current circuit-breakers.
UNE-EN 61083-2:2014 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
UNE-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (Endorsed by Asociación Española de Normalización in May of 2021.)

Korean Agency for Technology and Standards (KATS)

KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1-2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS C IEC 61083-1:2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
KS C IEC 61083-1-2006(2016) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C 1001-1970 Impulse voltage testing for instrument transformers
KS C IEC 61083-2:2019 Instruments and software used for measurement in high-voltage and highcurrent tests – Part 2: Requirements for software for tests with impulse voltages and currents
KS C IEC 61083-2-2019 Instruments and software used for measurement in high-voltage and highcurrent tests – Part 2: Requirements for software for tests with impulse voltages and currents
KS C IEC 61083-2-2019(2024) Instruments and software used for measurement in high-voltage and highcurrent tests – Part 2: Requirements for software for tests with impulse voltages and currents
KS B ISO 9022-8-2017(2022) Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8-2017 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8:2017 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8-2022 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8:2002 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS B 5628-1991 Test Transparencies for Overhead Projectors
KS C IEC 60427:2002 Synthetic testing of high-voltage alternating current circuit-breakers
KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation
KS C IEC 60427:2016 Synthetic testing of high－voltage alternating current circuit－breakers
KS B 0950-2009(2024) Metallic materials - Instrumented indentation test for indentation tensile properties

YU-JUS

JUS N.A5.544-1989 Bigh-voltage test technicpies. Application gui?e for measuring ?evices
JUS N.H9.100-1984 Instrument transformers. Measurements ofpartial discharges

Association Francaise de Normalisation

NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Devices and software used for measurements during high voltage impulse tests - Part 1: requirements for devices
NF C41-108*NF EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2 : requirements for software for tests with impulse voltages and currents
NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
NF C41-105:1993 Digital recorders for measurements in high-voltage impulse tests. Part 1 : requirements for digital recorders.

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61083:2007 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
OS GSO ISO 9022-8:2013 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion

Comitato Elettrotecnico Italiano

CEI EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
CEI EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and highcurrent tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

German Institute for Standardization

DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
DIN EN 61083-1:2002-01*VDE 0432-7:2002-01 Digital recorders for measurements in high-voltage impulse tests
DIN 53425:1965 Testing of rigid foams; creep-depending-on-time compression test under heat
DIN EN IEC 61083-3:2022-08*VDE 0432-12:2022-08 Instruments and software used for measurement in high-voltage and high-current tests
DIN EN 61083-2:2013-12*VDE 0432-8:2013-12 Instruments and software used for measurement in high-voltage and high-current tests
DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
DIN ISO 9022-8:2000 Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994)
DIN EN 837-1:1997 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
DIN EN 352-4:2006 Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs; English version of DIN EN 352-4:2001 + A1:2005
DIN ISO 9022-8:2000-09 Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994)
DIN EN 61083-1 E:2017-06 Draft Document - Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for hardware for impulse tests (IEC 42/344/CD:2016)
DIN 16086:2006-01 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN 16086:2006 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets

Swedish Institute for Standards

SS-EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
SS-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
SS-EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
BH GSO ASTM F2939:2023 Standard Specification for High Voltage Phasing Testers
BH GSO ISO 9022-8:2015 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion

CENELEC - European Committee for Electrotechnical Standardization

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders

CZ-CSN

CSN 66 8028-1973 Stability lot according to Bergmann-.Junk
CSN 66 8102 Cast.30-1978 Smokeless powders. Methods of testing. Stability test according to Bergmann-Junk
CSN 50 0368-1990 Paper and board tcsting. Determination of resistance to picking aecording to IGT
CSN 35 9736 Za-1980 Revision a) - 1/1980 Czech National Standard 35 9736 High voltage and high voltage testers

Danish Standards Foundation

DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DANSK DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
DS/EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents

British Standards Institution (BSI)

BS EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for software for tests with impulse voltages and currents
BS ISO 9022-8:1994 Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion
BS ISO 9022-8:1995 Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion
BS EN 61083-1:2001 Digital recorders for measurements in high-voltage impulse tests. Requirements for instruments
BS EN 352-4:2001 Hearing protectors - Safety requirements and testing - Level-dependent ear-muffs
BS EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests-Requirements for digital recorders
06/30149562 DC IEC 61083-2. Instruments and software used for measurements in high-voltage impulse test. Part 2. Requirements for software
BS EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for hardware for tests with alternating and direct voltages and currents
BS ISO 9022-18:1994 Optics and optical instruments. Environmental test methods-Combined damp heat and low internal pressure
BS EN 60427:2001 Synthetic testing of high-voltage alternating current circuit-breakers

Bureau of Indian Standards

IS 15638-2-2018 Instruments and Software Used for measurement in High-Voltage and High Curent Tests-2 Requirements for Software for Tests with Impulse Voltages and Currents (First Revision)
IS 15638-1-2023 Instruments and Software Used for Measurements in High-Voltage and High-Current Tests - Part 1 Requirements for Instruments for Impulse Tests
IS 13630-1TO15-2006 Ceramic Tiles - Methods of Test, Sampling and Basis for Acceptance
IS 13630-15-2019 Ceramic Tiles â€” Methods of Test, Sampling and Basis for Acceptance Part 15 Sampling and Basis for Acceptance ( First Revision )
IS 15638-3-2022 Instruments and Software Used for Measurement in High-Voltage and High-Current Tests Part 3 Requirements for Hardware for Tests with Alternating and Direct Voltages and Currents
IS 10236-9-1983 Procedure for basic climatic and durability test for optical instruments:Part 9 Low air pressure (altitude) test

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0432-7-2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
VDE 0432-7-2017 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for hardware for impulse tests (IEC 42/344/CD:2016)
VDE 0432-5-1987*DIN VDE 0432-5:1987 High-voltage test techniques; Oscilloscopes and peak voltmeters for impulse tests
VDE 0670-104-1992*DIN VDE 0670-104:1992 High-voltage a.c. circuit-breakers; Type tests and routine tests
VDE 0432-12-2018 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 42/351/CDV:2017); German version prEN 61083-3:2017
VDE 0432-8 E*DIN IEC 61083-2:2006-10 Instruments and software used for measurements in high-voltage impulse tests – Part 2: Requirements for software
VDE 0670-108-2001*DIN EN 60427:2001 Synthetic testing of high-voltage alternating current circuit-breakers (IEC 60427:2000)

Standards Norway

SN-CWA 17552:2020 Engineering materials — Electronic data interchange — Instrumented indentation test data

European Committee for Standardization (CEN)

CWA 17552:2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
CWA 17552-2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
prEN 61083-1-1992 Digital recorders for measurements in high-voltage impulse tests; part 1: requirements for digital recorders (IEC 1083-1:1991)
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 1071-7:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of hardness and Young's modulus by instrumented indentation testing

AT-ON

ONORM E 1364-1971 Apparatus for pressure lest on shrouds.

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P1122/D8.3, June 2024 IEEE Draft Standard for Digital Recorders for Measurements in High-Voltage and High-Current Impulse Tests
IEEE C12.9-1987 TEST SWITCHES FOR TRANSFORMER-RATED METERS
IEEE C12.9-1982 TEST SWITCHES FOR TRANSFORMER-RATED METERS

European Committee for Electrotechnical Standardization（CENELEC）

EN 61083-1:2001 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments
EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
HD 580 S1-1990 Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers
EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

Lithuanian Standards Office

LST EN 61083-1-2002 Instruments and software used for measurements in high- voltage impulse tests. Part 1: Requirements for instruments (IEC 61083-1:2001)

American Society for Testing and Materials (ASTM)

ASTM F2939-13(2019) Standard Specification for High Voltage Phasing Testers
ASTM F2939-13(2019)e1 Standard Specification for High Voltage Phasing Testers
ASTM F2939-13(2025) Standard Specification for High Voltage Phasing Testers
ASTM F2939-13 Standard Specification for High Voltage Phasing Testers
ASTM RR-E28-1045 2015 E2546-Practice for Instrumented Indentation Testing
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM RR-E28-1025 2007 E2546-Standard Practice for Instrumented Indentation Testing

International Organization for Standardization (ISO)

ISO 9022-8:1994 Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)

Society of Automotive Engineers (SAE)

SAE J977_196611 Instrumentation for Laboratory Impact Tests
SAE J977A_196812 Instrumentation for Laboratory Impact Tests
SAE AIR5026A-2011 Test Cell Instrumentation
SAE AIR5026-1996 Test Cell Instrumentation
SAE J211A-1971 INSTRUMENTATION FOR IMPACT TESTS
SAE J211B_197412 Instrumentation for Impact Test

ESDU - Engineering Sciences Data Unit

SPF-M3-7-2007 Developing a high temperature and pressure fluid dynamic gauge for the crude oil annular test section.

SCC

SPC GB/T 32065.15-2019 Environmental test methods for oceanographic instruments -- Part 15: Hydrostatic pressure test (TEXT OF DOCUMENT IS IN CHINESE)

SE-SIS

SIS SS 428 91 05-1982 Portable single pole voltage testers for 3,6 - 420 kV h/g hes t system voltage - Design and testing

Gosstandart of Russia

GOST ISO 13402-2011 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods

Japanese Industrial Standards Committee (JISC)

JIS B 1758:2013 Acceptance tests for gear measuring instruments
JIS C 1731-2:1998 Instrument transformers for testing purpose and used with general instrument Part 2: Voltage transformers