GB/T 19810-2005 in English
VALIDPolyethylene (PE) pipe and fittings—Determination of the tensile strength and failure mode of test pieced from a butt-fused joint
- Issued on:2005-03-23
- Implemented on:2005-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$59.00
| Standard No: | GB/T 19810-2005 |
| Document status: | VALID |
| Title in English: | Polyethylene (PE) pipe and fittings—Determination of the tensile strength and failure mode of test pieced from a butt-fused joint |
| Title in Chinese: | 聚乙烯(PE)管材和管件热熔对接接头拉伸强度和破坏形式的测定 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2005-03-23 |
| Implemented on: | 2005-10-01 |
| ICS Classification: | 83.140.30-Plastics pipes, fittings and valves |
| Chinese Classification: | G33-Plastic profile |
| Professional Classification: | GB-National Standard |
| Related Keywords: | tensile failure mode
tensile strength failure mode butt-fused joint scopethis standard test methods |
| Related Topics: | docking
Hot Melt Tensile Strength Tensile Strength pe heat and tube GB/T19810-2005 pe pipe pipe Pipe Tensile Strength Pipe Fittings Pipe Fittings GBT19810 GBT19810-2005 Butt strength pipe National standard 19810 Method for determination of tensile strength of polypropylene gb/t 19810 gb/t19810 gbt19810 gb/t 19810-2005 |
《GB/T 19810-2005聚乙烯（PE）管材和管件 热熔对接接头 拉伸强度和破坏形式的测定》由TC48（全国塑料制品标准化技术委员会）归口，主管部门为中国轻工业联合会
本标准规定了测定聚乙烯(PE)热熔对接组件的拉伸强度和拉伸破坏形式的试验方法。本方法适用于公称外径不小于90 mm的聚乙烯(PE)管材与管材或管材与管件插口端的热熔对接接头。本方法可以与其他测试方法结合使用，来判定对熔焊接接头的质量。
Scope
This standard specifies the test methods for determining the tensile strength and tensile failure mode of polyethylene (PE) hot-melt butt joint components. This method is applicable to hot-melt butt joints between polyethylene (PE) pipes and pipes or pipes and pipe fittings with a nominal outer diameter of not less than 90 mm. This method can be used in combination with other test methods to determine the quality of butt fusion welded joints.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 44574-2024 in English
Plastic check valves for anti-pollution for discharge piping systems inside buildings
2024-09-29 -
GB/T 18251-2019 in English
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
2019-08-30 -
GB/T 16800-2008 in English
Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage
2008-08-19 -
GB/T 15558.1-2023 in English
Buried polyethylene(PE) piping systems for the supply of gaseous fuels—Part 1:General
2023-11-27 -
GB/T 35451.2-2018 in English
Polypropylene(PP)structure-wall piping systems for underground drainage and sewerage—Part 2:Polypropylene spirally enwound structure-wall pipes
2018-12-28 -
GB/T 18991-2003 in English
Thermoplastics pipes and fittings for hot and cold water systems
2003-03-05
