GB/T 21433-2008 in English
VALIDDetecting susceptibility to intergranular corrosion in stainless steel pressure vessels
- Issued on:2008-01-31
- Implemented on:2008-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$291.00
《GB/T 21433-2008不锈钢压力容器晶间腐蚀敏感性检验》由TC262(全国锅炉压力容器标准化技术委员会)归口,主管部门为国家标准化管理委员会。
本标准规定了不锈钢压力容器的晶间腐蚀敏感性检验要求与规则。
1 Scope
This standard specifies the requirements and rules for detecting susceptibility to intergranular corrosion in stainless steel pressure vessels.
1.1 This standard is applicable to stainless steel pressure vessels which including the stainless steel stationary pressure vessels, heat exchangers cylinders, transportable pressure vessels and pressure pipelines etc. The stainless steel ordinary pressure vessels and other stainless steel mechanical equipments may also adopt this standard by making reference (in this text, the "pressure vessel" is referred to as "vessel" sometimes).
1.2 In this standard, the applicable stainless steel used for manufacturing pressure vessels refers to acid-resistant steel, in which the chromium content is no less than 16%, including the austenitic stainless steel, ferritic stainless steel and duplex austenitic-ferritic stainless steel while excluding martensitic stainless steel and precipitation-hardening stainless steel. Not only including the press working stainless steel and its welded joints but also including the stainless cast steel and clad layer.
1.3 This standard not only specifies the requirements for detecting susceptibility to intergranular corrosion in stainless steel pressure vessels themselves, but also specifies corresponding detection requirements for stainless steel raw materials, welding materials and outsourced parts used for manufacturing the stainless steel pressure vessels.
1.4 The intergranular corrosion involved in this standard refers to sensitized intergranular corrosion. The non-sensitized intergranular corrosion is not included.
Foreword I
Introduction II
1 Scope 1
2 Normative References 1
3 Terms and Definitions 2
4 General Provisions 7
5 Determination of detection 9
6 Selection of Detection Methods 11
7 The Status of Specimen to Be Detected 15
8 Sampling and Batching for Vessel Detection 17
9 Qualification Indexes for Detection 19
10 Application Scope of Detection Result 20
11 Detection Report for Vessels 24

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 44457-2024 in English
Hydrogen storage pressure vessel used in hydrogen refueling station
2024-08-23 -

GB/T 20663-2026 in English
Accumulators
2026-01-28 -

GB/T 26929-2011 in English
Terminology for pressure vessels
2011-09-29 -

GB/T 8334-2022 in English
Periodic inspection and evaluation of liquefied petroleum steel gas cylinders
2022-03-09 -

GB/T 15382-2021 in English
General specifications of gas cylinder valves
2021-08-20 -

GB 33147-2025 in English
Liquefied dimethyl ether steel gas cylinders
2025-12-02 -

GB/T 5099.1-2017 in English
Seamless steel gas cylinders―Part 1:Quenched and tempered steel cylinders with tensile strengthless than 1 100 MPa
2017-12-29 -

GB/T 26556-2011 in English
Generic specification for online leak sealing sealant of pressure equipment
2011-06-16 -

GB/T 35544-2017/XG1-2020 in English
Fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for theon-board storage of compressed hydrogen as a fuel for land vehicles,includes Amendment 1
2020-04-28