GB/T 22906.7-2008 in English

VALID

Testing of cores - Part 7: Determination of flexural modulus by the three-point method

Issued on:2008-12-30
Implemented on:2009-09-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $150.00
$146.00

Standard No:	GB/T 22906.7-2008
Document status:	VALID
Title in English:	Testing of cores - Part 7: Determination of flexural modulus by the three-point method
Title in Chinese:	纸芯的测定第7部分：弹性模量的测定（三点法）
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2008-12-30
Implemented on:	2009-09-01
Chinese Classification:	Y30-Papermaking in general
Professional Classification:	GB-National Standard
Related Keywords:	three-point method scopethis part flexural modulus elastic modulus modulus part
Related Topics:	Elastic Modulus Modulus Cardboard modulus of elasticity Elastic Modulus Analysis Elastic Modulus Analysis Elastic modulus+ Three-point method for the determination of contact angle Indium modulus of elasticity Indium modulus of elasticity modulus of elasticity The meaning of elastic modulus How is the modulus of elasticity measured? reduced modulus of elasticity Why is the modulus of elasticity measured? modulus of elasticity How to Measure the Modulus of Elasticity Modulus of elasticity of cardboard modulus of elasticity The Physics of Elastic Modulus Elastic modulus monitoring GB/T 22906.7 GB/T 22906.7-2008 Four-point bending moment elastic modulus Standard for elastic modulus Concrete elastic modulus

《GB/T 22906.7-2008纸芯的测定第7部分：弹性模量的测定（三点法）》由TC141（全国造纸工业标准化技术委员会）归口，主管部门为中国轻工业联合会。
GB/T 22906的本部分规定了纸芯弹性模量的测定方法，该纸芯应满足以下条件：
―――内径：50mm~350mm；
―――最小壁厚：0.02×内径或不小于2.0mm；
―――最小长度：8×内径或不小于1000mm。
本部分适用于纸芯弹性模量的测定。

Scope

This part of GB/T 22906 specifies the method for the determination of the elastic modulus of the paper core. The paper core should meet the following conditions: —Inner diameter: 50 mm to 350 mm; —Minimum wall thickness: 0.02×inner diameter or not less than 2.0 mm; — Minimum length: 8 x inner diameter or not less than 1000 mm. This section applies to the determination of the elastic modulus of the paper core.

More samples: JGJ 94-2008 JC/T 2453-2018 NB/T 47013.2-2015

Sample only — not a preview of GB/T 22906.7-2008

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 6548-2011 in English

Determination of ply adhesive strength for corrugated fiberboard
2011-05-12
GB/T 1539-2007 in English

Paperboard—Determination of bursting strength
2007-12-05
GB/T 24990-2010 in English

Paper,board and pulps—Determination of chromium
2010-08-09
GB/T 742-2018 in English

Fibrous raw material,pulp,paper and board—Determination of residue(ash)on ignition at 575 ℃ and 900 ℃
2018-12-28
GB/T 42702-2023 in English

Paper,board and paper products—Determination of antibacterial activity
2023-05-23
GB/T 36420-2018 in English

Tissue paper and products—Safety assessment management system of chemicals and materials
2018-06-07
GB/T 147-2020 in English

Untrimmed sizes of printing, writing and drawing paper
2020-07-21
GB/T 7974-2013 in English

Paper,board and pulps—Measurement of diffuse blue reflectance factor—D65 brightness(Diff/ Geometry,Outdoor daylight conditions)
2013-10-10
GB/T 18402-2001 in English

Pulps--Determination of drainability (dainage time method)
2001-08-06
GB/T 24288-2009 in English

Paper and board—Determination of dominant wavelength and excitation purity—D65/10°diffuse reflectance method
2009-07-31