GB/T 26869-2011 in English
VALIDInsulator-test on indoor post insulator of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
- Issued on:2011-07-29
- Implemented on:2011-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$301.00
| Standard No: | GB/T 26869-2011 |
| Document status: | VALID |
| Title in English: | Insulator-test on indoor post insulator of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV |
| Title in Chinese: | 标称电压高于1000V低于300kV系统用户内有机材料支柱绝缘子的试验 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2011-07-29 |
| Implemented on: | 2011-12-01 |
| ICS Classification: | 29.080.10-Insulators |
| Chinese Classification: | K48-Insulator |
| Professional Classification: | GB-National Standard |
| Related Keywords: | organic material post insulators
indoor post insulator post insulators organic material nominal voltages |
| Related Topics: | Organic matter in polymer materials
Polymer material testing machine about the pillar Application of organic polymer materials Q Q standard insulator organic piezoelectric materials post insulator GBT26869 GB/T 26869-2011 Pillar insulator test |
《GB/T 26869-2011标称电压高于1000V低于300kV系统用户内有机材料支柱绝缘子的试验》由TC80(全国绝缘子标准化技术委员会)归口,主管部门为中国电器工业协会。
Scope
This standard applies to indoor organic material post insulators used in atmospheric conditions for electrical installations or equipment used in AC systems with a nominal voltage higher than 1000V and lower than 300kV (range I defined in GB 311.1) and a frequency not greater than 100Hz. This standard does not cover composite insulators. The purpose of this standard is to: — define the terms used; — specify the electrical and mechanical properties of post insulators made of organic materials, and specify the conditions for testing the specified values of these properties; — specify test methods; — specify acceptance criteria. This standard does not give values for the characteristics of post insulators, nor does it involve the selection of post insulators under specific operating conditions. GB/T 8287.2 specifies the values of electrical and mechanical properties and gives the dimensions required for the interchangeability of post insulators.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 44179-2024 in English
Composite hollow core station post insulators with a.c. voltage greater than 1 000V and d.c. voltage greater than 1 500V—Definitions,test methods and acceptance criteria
2024-07-24 -

GB/T 7253-2019 in English
Insulators for overhead lines with a nominal voltage above 1 000 V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type
2019-12-10 -

GB/T 19443-2017 in English
Insulators for overhead lines with a nominal voltage above 1 500 V-Ceramic of glass insulator units for d.c.systems-Definitions,test methods and acceptance criteria
2017-11-01 -

GB/T 21206-2007 in English
Characteristics of line post insulators
2007-12-03 -

GB/T 22079-2019 in English
HV polymeric insulators for indoor and outdoor use -- General definitions, test methods and acceptance criteria
2019-12-10 -

GB/T 8287.1-2008 in English
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 1: Test on insulators of ceramic material or glass
2008-06-30 -

GB/T 4056-2019 in English
Dimensions of ball and socket couplings of string insulator units
2019-12-10 -

GB/T 34937-2017 in English
Insulators for overhead lines-Composite suspension and tension insulators for d.c. systems with a nominal voltage greater than 1 500 V-Definitions,test methods and acceptance criteria
2017-11-01 -

GB/T 12944-2011 in English
High-voltage ceramic wall bushings
2011-07-29 -

GB/T 26218.1-2010 in English
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 1:Definitions,information and general principles
2011-01-14