GB/T 26945-2011 in English

《GB/T 26945-2011集装箱空箱堆高机》由TC332（全国工业车辆标准化技术委员会）归口，主管部门为中国机械工业联合会。

Empty container handler

1 Scope

This standard specifies the requirements, test methods, inspection rules and markings, packaging, transportation and storage of empty container handler (hereinafter referred to as "handler").

This standard is applicable to empty container handlers for loading and unloading containers specified in GB/T 1413.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendment) applies.

GB/T 1413 Series 1 freight containers — Classification,dimensions and ratings (GB/T 1413-2008, ISO 668:1995, IDT)
GB/T 3220 Freight container spreader
GB 4785 Instructions for installation of the external lighting and light-signalling devices for motor vehicles and their trailers
GB/T 7593 Powered industrial trucks — Symbols for operator controls and other displays (GB/T 7593-2008, ISO 3287:1999, IDT)
GB/T 9286 Paints and varnishes — Cross cut test for films (GB/T 9286-1998, eqv ISO 2409: 1992)
GB 10827 Powered industrial trucks — Safety code (GB 10827-1999, eqv ISO 3691: 1980)
GB/T 13306 Plates
GB/T 14039 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles (GB/T 14039-2002, ISO 4406: 1999, MOD)
GB/T 18849 Powered industrial trucks — Brake performance and component strength (GB/T 18849-2002, ISO 6292: 1996, EQV)
GB/T 26560 Powered industrial trucks — Safety signs and hazard pictorials — General principles (GB/T 26560-2011, ISO 15870: 2000, IDT)
GB/T 26561 Counterbalanced trucks handling freight containers of 6 m length and above — Additional stability tests (GB/T 26561-2011, ISO 10525: 1997, IDT)
JB/T 3300 Counterbalanced fork-lift trucks — Testing method for whole machines

3 Requirements

3.1 Basic requirements

3.1.1 The manufacturing requirements of the main structure of the handler (see Figure 1) shall meet those specified in Table 1.

3.1.2 The requirements of the main technical performance parameters of the handler shall meet those specified in Table 2.

Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test method
5 Inspection rules
6 Marking, packaging, transportation and storage