GB/T 27748.3-2011 in English
SUPERSEDEDStationary fuel cell power system - Part 3: Installation
- Issued on:2011-12-30
- Implemented on:2012-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$204.00
《GB/T 27748.3-2011固定式燃料电池发电系统 第3部分：安装》由TC342（全国燃料电池及液流电池标准化技术委员会）归口，主管部门为中国电器工业协会。
Scope
This part of GB/T 27748 specifies the minimum safety requirements for indoor and outdoor installation of stationary fuel cell power generation systems under the condition of complying with GB/T 27748.1-2011 "Safety of Stationary Fuel Cell Power Generation Systems", and applicable Installation in the following systems: - electrically connected to the main equipment directly or through a transfer switch; - independent power distribution systems; - installations that can supply alternating current or direct current; - installations with or without heat recovery. This section does not apply to: - fuel supply and/or fuel storage systems; - couplings to the grid; - portable fuel cell power generation systems; - driven fuel cell power generation systems; - auxiliary power unit (APU) applications equipment. Typical stationary fuel cell power generation system components Table 1
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 20042.7-2024 in English
Proton exchange membrane fuel cells—Part 7: Test method of carbon paper properties
2024-12-31 -
GB/T 33978-2017 in English
Proton exchange membrane fuel cell modules for road vehicles
2017-07-12 -
GB/Z 27753-2011 in English
Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
2011-12-30 -
GB/T 23645-2009 in English
Test methods of fuel cell power system for passenger cars
2009-04-21 -
GB/T 38914-2020 in English
Evaluation method for lifetime of proton exchange membr
2020-06-02
