GB/T 2852-2008 in English
VALIDBall-bearing die sets for stamping dies
- Issued on:2008-04-10
- Implemented on:2008-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$204.00
| Standard No: | GB/T 2852-2008 |
| Document status: | VALID |
| Title in English: | Ball-bearing die sets for stamping dies |
| Title in Chinese: | 冲模滚动导向模架 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2008-04-10 |
| Implemented on: | 2008-10-01 |
| Superseding: |
GB/T 2852.1-1990 Ball slide die sets for press tools--Diagonal pillar sets
GB/T 2852.2-1990 Ball slide die sets for press tools-Center pillar sets GB/T 2852.3-1990 Ball slide die sets for press tools--Four pillar die sets GB/T 2852.4-1990 Ball slide die sets for press tools--Back pillar die sets |
| ICS Classification: | 25.120.30-Moulding equipment |
| Chinese Classification: | J46-Mould |
| Professional Classification: | GB-National Standard |
| Related Keywords: | ball-bearing die sets
guide die base die dies scopethis standard guide cast iron mold base |
| Related Topics: | guide
trend impulse scroll Guided mode GBT2852 GB/T 2852-2008 Demand-oriented Standard-oriented |
《GB/T 2852-2008冲模滚动导向模架》由TC33（全国模具标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准是对ＧＢ／Ｔ２８５２．１―１９９０《冲模滚动导向模架 对角导柱模架》、ＧＢ／Ｔ２８５２．２―１９９０《冲模滚动导向模架 中间导柱模架》、ＧＢ／Ｔ ２８５２．３―１９９０《冲模滚动导向模架 四导柱模架》和ＧＢ／Ｔ２８５２．４―１９９０《冲模滚动导向模架 后侧导柱模架》的合并修订。 本标准规定了冲模滚动导向模架的结构、尺寸规格与标记。本标准适用于冲模滚动导向模架。 本标准与ＧＢ／Ｔ２８５２．１―１９９０、ＧＢ／Ｔ２８５２．２―１９９０、ＧＢ／Ｔ２８５２．３―１９９０ 和ＧＢ／Ｔ２８５２．４―１９９０相比，主要变化如下：
―――将标准名称改为“冲模滚动导向模架”；
―――增加了“前言”和“规范性引用文件”；
―――对中间导柱模架的结构和尺寸规格作了较大的修改；
―――所有模架结构图中增加了限程器。
Scope
This standard stipulates the structure, size specification and marking of die rolling guide die base. This standard applies to die rolling guide cast iron mold base.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 14663-2024 in English
Plastic package moulds—Technical specifications
2024-09-29 -
GB/T 20914.1-2007 in English
Stamping dies—Gas springs—Part 1:General specification
2007-03-12 -
GB/T 8844-2017 in English
Diecasting dies--Specifications
2017-09-29 -
GB/T 39164-2020 in English
Tools for moulding—Thermal insulating sheets for injection moulds
2020-10-11 -
GB/T 2855.1-2008 in English
Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets
2008-04-10 -
GB/T 4678.1-2017 in English
Diecasting dies--Components--Part 1: Die plates
2017-09-29
