GB/T 32434-2015 in English
VALIDPlastics pipes and fittings―Butt fusion jointing procedures for polyethylene(PE)pipes and fittings used in the construction of gas and water distribution systems
- Issued on:2015-12-31
- Implemented on:2016-07-01
- File Format:PDF
- Delivery:Via email within 5 business days
$301.00
| Standard No: | GB/T 32434-2015 |
| Document status: | VALID |
| Title in English: | Plastics pipes and fittings―Butt fusion jointing procedures for polyethylene(PE)pipes and fittings used in the construction of gas and water distribution systems |
| Title in Chinese: | 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 5 business days |
| Issued on: | 2015-12-31 |
| Implemented on: | 2016-07-01 |
| ICS Classification: | 83.140.30-Plastics pipes, fittings and valves |
| Chinese Classification: | G33-Plastic profile |
| Professional Classification: | GB-National Standard |
| Related Keywords: | hot-melt butt welding procedures
water distribution systems fittings ― butt fusion jointing procedures water distribution systems scopethis standard single low-pressure hot-melt butt |
| Related Topics: | pe heat and tube
pe pipe plastic pipe plastic pipe pipe Docking parameters Pipe fittings Pipe Fittings Pipe fittings network Pipe Fittings GBT32434 GB/T 32434-2015 Plastic pipe fittings pipe pipe fittings Pipes and Fittings Water pipe hot melter gb/t 32434-2015 gb/t 32434 gbt32434 gb 32434 gb32434 |
《GB/T 32434-2015塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序》由TC48（全国塑料制品标准化技术委员会）归口，主管部门为中国轻工业联合会。
本标准规定了用 PE80和 PE100聚乙烯混配料制造的燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序及其质量控制的一般原则。
本标准规定的热熔对接程序适用于公称外径由75mm~630mm 的燃气和给水输送系统用聚乙烯(PE)管材及管件;单一低压热熔对接程序适用于壁厚不大于70mm 的燃气和给水输送系统用聚乙烯(PE)管材及管件的热熔对接程序;双重低压热熔对接程序适用于壁厚大于22mm 且不大于70mm 的燃气和给水输送系统用聚乙烯(PE)管材及管件的热熔对接程序。
Scope
This standard specifies the hot-melt butt welding procedures and general principles for quality control of polyethylene (PE) pipes and fittings for gas and water distribution systems made of PE80 and PE100 polyethylene blends. The hot-melt butt welding procedures specified in this standard are applicable to polyethylene (PE) pipes and fittings for gas and water distribution systems with a nominal outer diameter of 75 mm to 630 mm; the single low-pressure hot-melt butt welding procedure is applicable to the hot-melt butt welding procedures for polyethylene (PE) pipes and fittings for gas and water distribution systems with a wall thickness of not more than 70 mm; the double low-pressure hot-melt butt welding procedure is applicable to the hot-melt butt welding procedures for polyethylene (PE) pipes and fittings for gas and water distribution systems with a wall thickness of more than 22 mm and not more than 70 mm.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 13021-2023 in English
Polyolefin pipes and fittings—Determination of carbon black content—Test method of alcination and pyrolysis
2023-08-06 -
GB/T 24452-2009 in English
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings—Chlorinated poly (vinyl chloride)(PVC-C)
2009-10-15 -
GB/T 44574-2024 in English
Plastic check valves for anti-pollution for discharge piping systems inside buildings
2024-09-29 -
GB/T 8801-2007 in English
Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling
2007-12-05 -
GB/T 33608-2017 in English
Unplasticized poly(vinyl chloride)(PVC-U)structured-wall pipes for soil and waste discharge inside buildings
2017-05-12 -
GB/T 5836.1-2018 in English
Unplasticized poly(vinyl chloride)(PVC-U)pipes for soil and waste discharge inside buildings
2018-12-28 -
GB/T 27725-2011 in English
Butterfly valves of thermoplastics materials
2011-12-30 -
GB/T 15558.1-2023 in English
Buried polyethylene(PE) piping systems for the supply of gaseous fuels—Part 1:General
2023-11-27 -
GB/T 30086-2013 in English
Determination of Axial Coefficient of Linear Expansion of Plastics Pipes for Water Supply
2013-12-17
