GB/T 32710.2-2016 in English
VALIDSafety requirements for environmental testing and conditioning equipment-Part 2:Refrigerated circulators
- Issued on:2016-06-14
- Implemented on:2017-01-01
- File Format:PDF
- Delivery:Via email within 5 business days
$379.00
《GB/T 32710.2-2016环境试验仪器及设备安全规范 第2部分:低温恒温循环装置》由TC526(全国实验室仪器及设备标准化技术委员会)归口,主管部门为中国机械工业联合会。
Introduction
Analysis of the core content of the standard
| Safety dimension | NFL1 equipment | FL2 equipment | FL3 equipment |
|---|---|---|---|
| Liquid heat transfer medium | Non-flammable liquid only | Flammable liquid (temperature limit protection required) | Flammable liquid (temperature limit + liquid level protection required) |
| Over-temperature protection requirements | Fixed temperature protection | Adjustable temperature protection | Adjustable temperature protection + liquid level linkage cut-off |
Key technical requirements
1. Refrigeration system safety: The device using motor-compressor must comply with the requirements of GB 4706.17, and the high-voltage side must withstand 3 times the maximum working pressure (1.7.2). The cascade system needs to test each level of pressure independently.
2. Electrical protection: The lead-out terminal of the resistance heating device must meet the IPX7 waterproof level (14.101), and a 30mA residual current circuit breaker must be configured when the contact current exceeds 3.5mA (6.3).
Implementation suggestions
- When using flammable refrigerants, a pressure gauge and a stop valve are required if the filling volume is greater than 1kg (11.7.101)
- An emergency stop button is required when the circulating pump outlet pressure is greater than 0.1MPa (6.9.103)
- Regularly check the sealing of the pressure limiting device, pressure relief valve and safety valve (5.4.5)
Background of standard evolution
This standard is based on GB 4793.1-2007 and GB/T 32710.1-2016, and adds 11 supplementary requirements for the special risks of low-temperature constant temperature circulation devices (such as refrigerant leakage and low-temperature burns), including:
- New FL equipment classification (3.1.108-110)
- Forced non-automatic reset over-temperature protection (10.101)
- Transportation storage pressure test (11.7.102)

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 32710.8-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 8:Refrigerated incubators
2016-06-14 -

GB/T 32710.11-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 11:Heat aging test chambers
2016-06-14 -

GB/T 32710.4-2016 in English
afety requirements for environmental testing and conditioning equipment-Part 4:Heating circulators
2016-06-14 -

GB/T 32710.5-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 5:Heating baths
2016-06-14 -

GB/T 32710.6-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 6:Climatic chambers for biological application
2016-06-14 -

GB/T 32710.7-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 7:Climatic and environmental test chambers
2016-06-14 -

GB/T 32710.12-2016 in English
Safety requirements for environmental testing and conditioning equipment-Part 12:Salt baths
2016-06-14