GB/T 33068-2016 in English

VALID

Test method of physical properties for sulfur exhaust hydrogenation catalyst

Issued on:2016-10-13
Implemented on:2017-05-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $90.00
$88.00

Standard No:	GB/T 33068-2016
Document status:	VALID
Title in English:	Test method of physical properties for sulfur exhaust hydrogenation catalyst
Title in Chinese:	硫磺尾气加氢催化剂物理性能试验方法
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2016-10-13
Implemented on:	2017-05-01
ICS Classification:	71.100.99-Other products of the chemical industry
Chinese Classification:	G74-Basic standards and general methods for catalyst
Professional Classification:	GB-National Standard
Related Keywords:	average pore diameter physical adsorption method nitrogen adsorption method test method sulfur tail gas hydrogenation resistance hg/t2782 intelligent particle strength test method physical properties
Related Topics:	catalyst sulfur hydrogenation catalyst Catalyst Standard Sulfonated compounds How to measure catalytic performance physical properties Analytical method for chemical composition of sulfur tail gas hydrogenation catalyst Test methods for electrocatalysts Cadmium Catalytic Performance Exhaust gas detection method GB/T 33068-2016 Test methods for physical properties of sulfur tail gas hydrogenation catalysts Hydroxide catalyst exhaust catalyst Catalyst Stability Test Hydrogenation airtight test hydrogen catalysis Cobalt Catalyzed Hydrogen Test method for hydrogen sulfide in air Catalytic Performance Equipment cobalt hydrogen sulfide Catalytic Performance Equipment Hydrogenation catalyst + device Hydrogen sulfide test results Hydrogen sulfide test results exhaust/ "catalyst Sulfide and hydrogen sulfide Catalytic ability Hydride Generator Hydrogen sulfide for testing For hydrogen sulfide test How to test hydrogen sulfide hydrogen sulfide cylinder prehydrogenation catalyst GBT33068 GB/T 33068-2016 "Automotive Exhaust Three-Way Catalyst Performance Test Method" GB/T 34248-2017 Hydrogenation catalyst coking treatment method Catalytic sulfonation technology Photocatalytic hydrogen evolution in alkaline water Hydrogen TPR physical and chemical experiment Causes of tailing of acidic compounds Hydrogen sulfide cylinder use Test method for degree of sulfonation Hydrogen sulfide resistance test Invention of hydrogen sulfide test Linear optimization method for biochemical reagents Traditional catalyst design methods Sulfuric acid sulfonation method for impurity removal Hydrogen Sulfide International Methods Automotive Catalyst Adhesion Test Catalyst moisture test method Tail-sweeping agent in liquid phase method Characterization Methods Biocatalysts Sulfur oxide exhaust gas detection method Hydrogen sulfide test method before saturator Preparation method of electrochemical hydrogenation catalyst Water iodine test method Cerium sulfate catalytic method Laboratory hydride handling methods The testing methods for hydrogen sulfide gas include How to test hydride New method for hydrogen sulfide Libra's adding method (physics)

《GB/T 33068-2016硫磺尾气加氢催化剂物理性能试验方法》由TC63（全国化学标准化技术委员会）归口，主管部门为中国石油和化学工业联合会。

Introduction

Interpretation of the test methods for physical properties of sulfur tail gas hydrogenation catalysts

1. Scope of application of the standard

This standard applies to sulfur tail gas hydrogenation catalysts with cobalt oxide and molybdenum oxide as the main active components and aluminum oxide as the carrier in the Claus sulfur recovery process using hydrogen sulfide acid gas as raw material. The measurement indicators include:

Bulk density
Particle crushing resistance
Abrasion rate
Specific surface area
Pore volume
Average pore diameter

2. Standard framework comparison table

Measurement indicators	Reference standard	Measurement method	Instrument requirements
Bulk density	HG/T4680	Heating and drying method	- Oven (120℃) - Analytical balance
Particle crushing resistance	HG/T2782	Intelligent particle strength test method	- Intelligent particle strength testing machine - Range 0N~500N
Abrasion rate	HG/T2976	Vibration screening method	- Vibration screening machine - Test sieve (aperture φ2.0mm)
Specific surface area, pore volume, average pore diameter	Physical adsorption method	Nitrogen adsorption method	- Physical adsorption instrument - Degassing device (300℃, vacuum degree ≤1.3Pa) - Analytical balance

3. Implementation suggestions

Control of experimental conditions:

Sample pretreatment: Dry at 120℃ for 2 hours to avoid moisture affecting the test results.
Particle screening: Use a test sieve with a pore size of φ2.0mm (in accordance with the R40/3 series in GB/T6003.1)
Instrument calibration: Regularly calibrate the analytical balance, vacuum pump and adsorption instrument to ensure measurement accuracy.

Optimization of test steps:

Sample degassing: Keep at 300℃ for 3 hours to ensure that the sample is completely degassed.
Adsorption-desorption analysis: Use liquid nitrogen as the adsorption medium to accurately control the temperature (-196℃) and pressure.

More samples: DL/T 368-2010 JGJ 94-2008 GB 50021-2001(2009)

Sample only — not a preview of GB/T 33068-2016

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 31590-2025 in English

Analytical method of chemical composition for flue gas DeNOx catalysts
2025-12-02
GB/T 37354-2019 in English

Analytical method of chemical composition for activated carbon mercury removal catalyst
2019-03-25
GB/T 33067-2016 in English

Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature
2016-10-13
GB/T 38108-2019 in English

Test method for derterming chlorine capacity of alkaline earth metal-based sorbents at high temperature
2019-10-18
GB/T 34233-2017 in English

Test method of activity for low temperature sulphur tail gas hydrogenation catalyst
2017-09-07