Traditional catalyst design methods

Traditional catalyst design methods, Total:414 items.

The international standard classification for "Traditional catalyst design methods" includes: Other products of the chemical industry , Surface active agents , Products of the chemical industry in general , Physicochemical methods of analysis , Other non-ferrous metals and their alloys , Textile auxiliary materials .

The Chinese standard classification for "Traditional catalyst design methods" includes: Basic standards and general methods for catalyst , Catalyst , Precious metals and their alloys , Basic standards and general methods for dye , Basic standards and general methods for chemical additive , Rare metals and their alloys analysis method .

未注明发布机构

ASTM RR-D32-1007 1983 D4222-Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM RR-D32-1009 1984 D4365-Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM RR-D32-1023 1988 D4824-Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM RR-D32-1006 1983 D3663-Standard Test Method for Surface Area of Catalysts
ASTM RR-D32-1024 1988 D4179-Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM RR-D32-1029 1991 D5154-Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM RR-D32-1037 1994 D4567-Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM RR-D32-1040 2004 D7084-Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM RR-D32-1035 1992 D4642-Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM RR-D32-1027 1989 D4926-Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM RR-D32-1033 1992 D4782-Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM RR-D32-1026 1988 D4781-Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM RR-D32-1019 1986 D4567-Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
DIN 53240-1 E:2012-07 Determination of hydroxyl value - Part 1: Method without catalyst
ASTM RR-D32-1017 1986 D4164-Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM RR-D32-1034 1992 D5153-Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM RR-D32-1030 1991 D5154-Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM RR-D32-1005 1985 D4512-Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
DIN 55901:1968 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers
ASTM RR-D32-1016 1985 D3907-Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM RR-D32-1022 1987 D4699-Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM RR-D32-1031 1992 D3663-Standard Test Method for Surface Area of Catalysts
ASTM RR-D32-1011 1984 D4438-Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM RR-D32-1014 1985 D4481-Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM RR-D32-1018 1986 D4180-Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM RR-D32-1042 2014 D7964-Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
DIN 55901 E:2018-07 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers
ASTM RR-D32-1003 1982 D4058-Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM RR-D32-1020 1986 D3943-Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM RR-D32-1039 2002 D6761-Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

工业和信息化部

HG/T 5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
HG/T 2780-2016 Test method of activityfor sulfur-tolerant carbon monoxide shift catalysts in low pressure
HG/T 5585-2019 Test method for determining activity of ruthenium-based ammonia synthesis catalysts
HG/T 5583-2019 Analytical method of chemical composition for gas phase ethylene polymerization catalyst
HG/T 5769-2021 Test method for copper in waste copper-based catalysts
HG/T 5036-2016 Test method of catalytic performance for organic sulfur conversion absorption catalysts at room temperature
HG/T 5040-2016 Analytical method of chemical composition in pre-reduced ammonia synthesis catalysts
HG/T 5409-2018 Analytical method of chemical composition for inorganic sulful removal of liquefied gas
HG/T 5581-2019 Test method of activity for polyethylene oxide catalysts
HG/T 5197-2017 Test Method for Hydration Resistance of Carbon Monoxide Sulfur Tolerant Shift Catalysts
HG/T 5530-2019 Analyticalmethod ofchemicalcomposition for silicate molecular sieve based catalysts
HG/T 5203-2017 Test method for activity of medium-temperature sulfur-tolerant hydrolysis catalysts
HG/T 5038-2016 Analytical method of chemical composition for Raney nickel catalyst
HG/T 5405-2018 Test method of catalytic performance for ethylene polymerization catalyst
HG/T 5194-2017 Alkylation catalyst activity test method
HG/T 5317-2018 Analytical method of chemical composition for removing mercaptan catalyst at room temperature
HG/T 5407-2018 Test method of activity for thiols removal catalyst at room temperature
HG/T 5189-2017 Analytical method of chemical composition for organic sulfur conversion absorption catalysts at room temperature
HG/T 5193-2017 Analytical method of chemical compositionfor methanol hydrogen production catalysts
HG/T 5406-2018 Test methods of sulfur capacity for LPG inorganic sulfur removal catalysts
HG/T 5403-2018 Analytical method of chemical composition for Mg-Ti based ethylene polymerization catalyst
HG/T 5039-2016 Analytical method of chemical composition for C02 dehydrogenation catalysts in urea synthesis using
HG/T 5766-2020 Test method of catalytic activityfor supported catalyst of rosin disproportionation
HG/T 5201-2017 Test method for sulfur capacity of activated carbon catalyst for removal of inorganic sulfur at room temperature
HG/T 5202-2017 Test Method for Heat Resistance of Carbon Monoxide Sulfur Tolerant Shift Catalysts
HG/T 5190-2017 Reaction performance test methods of catalyst for methanol to propylene
HG/T 5757-2020 Analytical method of chemical compositionfor aluminum based hydrogenation catalyst
HG/T 5027-2016 Test method of catalytic performance for butyraldehyde vapor phase hydrogenation of butanol catalyst
HG/T 5316-2018 Test method of activity for ammonia decomposition hydrogen production catalysts
HG/T 5037-2016 Test method of activity for methanol hydrogen production catalysts
HG/T 5191-2017 Analytical method of chemical composition of catalyst for methanol to light olefins
HG/T 5588-2019 Test method for cobalt in waste petrochemical catalysts
HG/T 5200-2017 Analysis method of chemical composition of activated carbon catalyst for removal of inorganic sulfur at room temperature
HG/T 5195-2017 Test method for catalytic performance of octenal gas phase hydrogenation to 2-ethylhexanol catalyst
HG/T 5756-2020 Analytical method of chemical composition for benzene selective hydrogenation to cyclohexene catalysts
HG/T 5526-2019 Aluminum-nickel alloy hydrogenation catalyst activity test method
HG/T 5591-2019 Determination method of acid site for methanol to light olefins catalysts
HG/T 5028-2016 Analytical method of chemical composition for butyraldehyde vapor phase hydrogenation of butanol catalyst
HG/T 5410-2018 Analytical method of chemical composition for medium-temperature sulfur-resistant hydrolysis catalysts
HG/T 6057-2022 Test method for determining activity of fixed-bed palladium-basedanthraquinone hydrogenation catalyst
HG/T 5909-2021 Analytical method of chemical composition for meropenem synthesis catalyst
HG/T 5587-2019 Analytical method of chemical composition for hydrogenation to arylamine with catalysts
HG/T 5762-2020 Analytical method of chemical compositionfor chromium based ethylene polymerization catalyst
HG/T 5955-2021 Petrochemical waste catalyst-Molybdenum determination method
HG/T 5586-2019 Analytical method for determining chemical composition in supported ammonia synthesis catalysts
HG/T 5415-2018 Analytical method of chemical composition for methanol vapor phase dehydration to methyl ether catalyst
HG/T 5589-2019 Analytical method of chemical composition for propylene polymerization catalyst
HG/T 5029-2016 Test method of activity for cobalt molybdenum curing uses catalyst
HG/T 5702-2020 Test method of activity for carbon monoxide removing catalyst in monomer olefin at low temperature
HG/T 5418-2018 Analytical method of chemical composition for manganese ozone decomposition catalyst
HG/T 5419-2018 Test method for activity of Mn based ozone decomposition catalyst
HG/T 5414-2018 Method for chemical composition analysis of diesel oil hydrofining catalyst
HG/T 5035-2016 Test method of catalytic performance in the catalyst for nitrobenzene hydrogenation to aniline
HG/T 5580-2019 Analytical method of chemical composition in polyoxyethylene catalyst
HG/T 5034-2016 Analytical method of chemical composition for platinum series catalysts gas phase benzene hydrogenation to cyclohexane
HG/T 5761-2020 Catalytic performance test methods of dimethyI ether carbonylation catalyst for methyl acetate synthesis

Professional Standard - Chemical Industry

HG 1-1431-1981 Analytical method for chemical composition of vanadium catalyst for sulfuric acid production
HG/T 2273.4-2014 Test method of natural gas reforming catalyst for primary and secondary reformer
HG/T 4555-2013 Analytical Method of Micro-chlorine in Fertilizer Catalyst
HG/T 6234-2023 Test method for manganese in waste Mn-based catalysts
HG/T 6235-2023 Method for determination of vanadium content in catalysts for oxidation of waste sulfur dioxide to sulfuric acid
HG/T 5756～5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
HG/T 6287-2024 Test method for the activity of oxygenated compounds in olefin stripping
HG/T 6227-2023 Analysis method of chemical composition of catalytic cracking catalyst X-ray fluorescence spectrometry
HG/T 4348-2012 est method of naphtha steam reforming catalysts
HG/T 2511-2005 Analytical method of chemical composition in Methanation catalyst
HG/T 5589～5593-2019 Propylene polymerization catalyst and methacrolein oxidation to methacrylic acid catalyst chemical composition analysis method, methanol to light olefin catalyst thermal wear index test method and acid site determination method and aluminum-based desulfur
HG/T 2693-2014 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
HG/T 3544-2006 Test method of actavity for high temperature carbon monoxide shift catalyst
HG/T 3553-1981 Analytical method for chemical composition of polyalcohol and low temperature shift catalyst
HG/T 4858-2015 Analytical method of chemical composition in palladium-carbon catalyst for purified terephthalic acid
HG/T 4350-2012 Test Method of Activity for Carbonyl Sulfide Hydrolyzed Catalysts At Room Temperature
HG/T 2780-1996 Test method for carbon monoxide sulfur tolerant shift catalysts
HG/T 4553-2013 Test Method of Activity for Sulfur-tolerant Carbon Monoxide Shift Catalysts in Medium-high Pressure
HG/T 4554-2013 Test Method of Activity for High Temperature Carbon Monoxide Shift Catalysts in High Pressure
HG/T 2511-2013 Analytical Method of Chemical Composition in Methanation Catalyst
HG/T 4678-2014 Analytical method of chemical composition in Iron-based catalyst. Fischer-Tropsch synthesis
HG/T 2516-2005 Analytical method of chemical composition in the catalyst oxidizing sulphuric dioxide into sulphuric acid
HG/T 2780-2009 Test method of activity for sulfur-tolerant carbon monoxide shift catalysts(low pressure part)
HG/T 3554-2013 Analytical Method of Chemical Composition in Ammonia Synthesis Catalyst
HG/T 3542-2005 Analytical method of micro - Sulphur in fertilizer catalyst
HG/T 3553-2013 Analytical Method of Chemical Composition in Low Temperature Carbon Monoxide Shift Catalyst
HG/T 6281-2024 Test method for catalyst activity of propylene oxidation to acrolein
HG/T 4677-2014 Reaction performance test method of iron-based catalyst for Fischer-Tropsch synthesis
HG/T 5189~5193-2017 Analytical method of chemical composition for organic sulfur conversion absorption catalysts at room temperature
HG/T 4856-2015 Analytical method of chemical composition for nickel series gas phase benzene hydrogenation catalysts
HG/T 2514-1993 Test method for organosulfur hydrogenation catalyst
HG/T 3555-2006 Analytical method of chemical components in light oil reforming catalyst
HG/T 2693-2007 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
HG/T 5316～5319-2018 Test method for activity of ammonia cracking hydrogen production catalyst, analysis method for chemical composition of sweetening catalyst at room temperature, sulfur capacity test and chemical composition analysis method for manganese oxide desulfurizati
HG/T 5584～5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
HG/T 5038~5040-2016 Analytical method of chemical compositionin pre-reduced ammonia synthesis catalysts
HG/T 2514-2006 Test method of actavity for organic sulfur hydrogenation catalyst
HG/T 3543-1988 Analytical method of chemical composition for natural gas reforming catalysts
HG/T 4864-2015 Test method of activity for CO2 dehydrogenation catalysis in urea synthesis using
HG/T 6148-2023 Test method for activity of chromium-based ethylene polymerization catalysts
HG/T 3545-2014 Test method of activity for ammonia synthesis catalyst
HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
HG/T 3543-2006 Analytical method of chemical composition in natural gas reforming catalyst
HG/T 5596～5597-2019 Medium and high pressure sulfur-resistant shift catalyst for carbon monoxide and activity test method for high-precision removal of hydrogen sulfide and sulfur oxide carbon purification catalyst (2019)
HG/T 4681-2014 Analytical method of chemical composition in the catalyst for nitrobenzene hydrogenation to aniline
HG/T 5408～5411-2018 Analytical method for chemical composition of ruthenium carbon catalyst for hydrogenation of pyridine to piperidine, analytical method for chemical composition of inorganic sulfur catalyst in deliquefied gas, analytical method for chemical composition of
HG/T 4676-2014 Physical performance test method in iron-based catalyst for Fischer-Tropsch synthesis
HG/T 2510-2014 Test method of activity for methanation catalyst
HG/T 3542-2013 Analytical Method of Micro - Sulphur in Fertilizer Catalyst
HG/T 4857-2015 Test method of activity for pre-reduced ammonia synthesis catalyst
HG/T 5035~5037-2016 Catalytic Performance Test of Nitrobenzene Hydrogenation to Aniline Catalyst and Normal Temperature Organic Sulfur Conversion and Absorption Catalyst and Activity Test Method of Methanol Hydrogen Production Catalyst (2016)
HG/T 5417～5420-2018 Catalyst activity test method for methanol vapor phase dehydration to dimethyl ether, manganese-based ozonolysis catalyst chemical composition analysis method and activity test method, and chemical composition analysis method for n-olefin to isobutylene c
HG/T 4353-2012 Test Method of Activity for Low Temperature Carbon Monoxide Shift Catalysts in Ordinary Pressure
HG/T 2516-2013 Analytical Method of Chemical Composition in the Catalyst Oxidizing Sulphuric Dioxide Into Sulphuric Acid
HG/T 4674-2014 Test method of activity for nickel series gas phase benzene hydrogenation catalysts
HG/T 3554-2005 Analytical method of chemical composition in ammonia synthesis catalyst
HG/T 2511-1993 Analytical method for chemical composition of methanation catalyst
HG/T 3542-1986 Analytical Method for Trace Sulfur in Fertilizer Catalysts
HG/T 2089-2014 Test method of activity for oxidizing sulphuric dioxide into sulphuric acid catalyst
HG/T 3544-1989 The determinatino of high temperature carbon monoxide shift catalyst
HG/T 5029~5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
HG/T 4352-2012 Test Method of Activity for Low Temperature Carbon Monoxide Shift Catalysts in High Pressure
HG/T 3554-1981 Analytical Method for Chemical Components of Ammonia Synthesis Catalyst
HG/T 6228-2023 Test method for primary particle size activity of catalysts for oxidation of sulfur dioxide to sulfuric acid
HG/T 5027~5028-2016 Catalytic performance test and chemical composition analysis method of butyraldehyde gas-phase hydrogenation to butanol catalyst (2016)
HG/T 2510-2006 Test method of activity for methanation catalyst
HG/T 3553-2005 Analytical method of chemical composition in low temperature carbon monoxide shift catalyst
HG/T 2515-1993 Analytical Method for Active Components of Organosulfur Hydrogenation Catalysts
HG/T 4198-2011 Analytical method of chemical composition in methanol synthesis catalyst
HG/T 3555-1984 Analytical method of chemical components in light oil reforming catalyst
HG/T 4859-2015 Analytical method of chemical composition for carbonyl sulfide hydrolyzed catalysis at room temperature
HG/T 5764～5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
HG/T 5909～5910-2021 Analytical methods for the chemical composition of meropenem synthesis catalysts and bimetallic supported polyether polyol synthesis catalysts (2021)
HG/T 2271.2-1992 Test method of platinum catalyst for S201 nitric acid production
HG/T 3545-2006 Test method of actavity for ammonia synthesis catalyst
HG/T 2089-1991 The catalyst oxidizing sulphuric dioxide into sulphuric acid
HG/T 4682-2014 Analytical method of chemical composition in the catalyst for cydohexanol dehydrogenation
HG/T 5405～5407-2018 Test methods for catalytic performance of ethylene polymerization catalysts, test methods for sulfur capacity of inorganic sulfur catalysts in deliquefied gas, and test methods for activity of sweetening catalysts at room temperature (2018)
HG/T 2273.4-2006 Test method of natural gas reforming catalyst for primary and secondary reformer
HG/T 3543-2014 Analytical method of chemical composition in natural gas reforming catalyst
HG/T 5759～5762-2020 Normal temperature iron oxide desulfurizer, dimethyl ether carbonylation to methyl acetate catalyst, dimethyl ether carbonylation to methyl acetate catalyst catalytic performance test method and chromium-based ethylene polymerization catalyst chemical com
HG/T 3545-1990 Determination of ammonia aynthesis catalyst
HG/T 3544-2014 Test method of activity for high temperature carbon monoxide shift catalyst
HG/T 2273.4-1992 Test methods for catalysts for primary and secondary reforming of natural gas
HG/T 2515-2013 Analytical Method of the Active Composition in Organic Sulfur Hydrogenation Catalyst
HG/T 3555-2016 Analytical method of chemical components in light oil reforming catalyst
HG/T 2510-1993 Methanation Catalyst Test Method
HG/T 4862-2015 Reaction performance test methods of catalyst for methanol to light olefins
HG/T 2089-2007 Test method of activity for oxidizing sulphuric dioxide into sulphuric acid catalyst
HG/T 2516-1993 Analytical method for chemical composition of vanadium catalyst for sulfuric acid production
HG/T 2515-2005 Analytical method of the active composition in organic sulfur hydrogenation catalyst
HG/T 2514-2014 Test method of activity for organic sulfur hydrogenation catalyst

Group Standards of the People's Republic of China

T/CRRA 0703-2018 Sampling method of solid spent petrochemical catalysts
T/CSTM 01264-2024 The determination method for acid accessibility index of catalytic cracking catalyst
T/CNIA 0097-2021 Green Design Product Evaluation Technical Specifications Noble Metal Carbon-Supported Catalysts
T/QGCML 4200-2024 Evaluation of denitration catalyst regeneration methods
T/HPAESRCU 0021-2023 Technical specification for green-design product assessment–Ozone catalyst
T/CIECCPA 021-2024 Quantification and evaluation method for carbon footprint of a flue gas denitrification catalyst product
T/CNIA 0099-2021 Green Design Product Evaluation Technical Specifications Alumina Supported Precious Metal Catalysts
T/CIET 113-2023 Green Design Product Evaluation Technical Specification Electric Power SCR Denitrification Catalyst
T/CIET 114-2023 Green design product evaluation technical specification Non-electric SCR denitrification catalyst
T/CIEP 0012-2024 Determination of carbon content of catalysts in catalytic cracking and catalytic reforming units - Elemental analyzer method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38602-2020 Test method of catalytic activity for catalytic wet oxidation of organic wastewater
GB/T 37360-2019 Test method of activity for rhodium carbon catalysts
GB/T 37354-2019 Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 37359-2019 Test method of activity for palladium carbon catalysts
GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 37355-2019 Test method of mercury removal rate for activated carbon mercury removal catalyst

Professional Standard - Agriculture

GB 3636-1983 Determination of abrasion for fertilizer catalyst, molecular sieve and absorbent
ZB G 75003-1986 Analytical method for loss on ignition of fertilizer catalyst
GB 3635-1983 Determination of granular crush-strength for fertilizer catalyst, molecular sieve and absorbent

Professional Standard - Energy

NB/SH/T 6075-2023 Dynamic Image Method for Determination of Catalyst Morphology in Catalytic Cracking
NB/SH/T 0918-2015 Standard test method for determination of catalyst aridity by ammonia chemisorption

国家能源局

SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method
SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method
SH/T 0964-2017 Determination of catalytic cracking catalyst wear index straight tube method
SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalyst - phenanthroline spectrophotometry
SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry
SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34233-2017 Test method of activity for low temperature sulphur tail gas hydrogenation catalyst
GB/T 34703-2017 Test method of catalytic activity for platinum-carbon catalysts
GB/T 33068-2016 Test method of physical properties for sulfur exhaust hydrogenation catalyst
GB/T 33104-2016 Test method for honeycomb catalyst for removal of NOx of marine SCR
GB/T 34234-2017 Analytical method of chemical composition for deoxy-sulphur and cyanide catalyst from coal gas
GB/T 35961-2018 Test method of physical properties for titanium oxide type sulfur recovery catalysts
GB/T 33103-2016 Test method of activity for alumium oxide type sulfur recovery catalyst
GB/T 34701-2017 Microelement analysis method of regeneration DeNDx catalysts
GB/T 34248-2017 Performance test method of three-way catalyst
GB/T 34702-2017 Analytical method of chemical composition for low temperature sulphur tail gas hydrogenation catalyst

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5548-1985 Resin finishing agent--Method of determination for the stability of solution after adding catalyst
GB/T 31590-2015 Analytical method of chemical composition for flue gas DeNOx catalysts
GB/T 31196-2014 Test method of activity for sulfur exhaust hydrogenation catalyst
GB/T 31193-2014 Test method of activity for titanium oxide type sulfur recovery catalyst
GB/T 31585-2015 Test method of activity for oxygen and sulphur and cyanider emoval purification catalyst from coal gas
GB/T 31590-2015(英文版) Analytical method of chemical composition for flue gas DeNO x catalysts
GB/T 23277-2009 Chemical analysis methods of catalysts containing precious metals - Determination of platinum palladium and rhodium in automobile exhaust-purifying catalysts - Spectrophotometry
GB 5548-1985 Method for Determination of Solution Stability of Resin Finishing Agent Added Catalyst
GB/T 31198-2014 Test method of activity for deoxidizing protection type sulfur recovery catalyst

Professional Standard - Petrochemical Industry

SH/T 0572-1993 Calculation method for catalyst pore size distribution (nitrogen desorption constant temperature line calculation method)

Professional Standard - Non-ferrous Metal

YS/T 834-2012 Determination of Loss on Ignition in Reforming Spent Platinum Catalyst
YS/T 1071-2015 Chemical analysis methods of hydrogen peroxide spent catalysts―Determination of palladium content―Spectrometry

化学工业部

HG 2089-1991 Test methods for vanadium catalysts for sulfuric acid production
HG 2273.4-1992 Test methods for natural gas first and second stage reforming catalysts
HG 2271.2-1992 Test method for platinum catalyst for type S201 nitric acid production

Professional Standard - Rare Earth

XB/T 607-2011 Test method of coating materials of catalyst for petrol vehicle emission purification
XB/T 607-2003 The test method of the coating material of catalyst for petrol vehicle emission purification

Professional Standard - Electricity

DL/T 2279-2021 Test method for sulfur dioxide oxidation ratio of selective catalyst reduction catalyst for thermal power plant- Powder method

Professional Standard - Machinery

JB/T 14410-2023 Diesel engines — Coated vanadium SCR catalyst — Chemical composition analysis method

American Society for Testing and Materials (ASTM)

ASTM D4438-24 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D4438-13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D5153-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D7084-04 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-23 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D7084-04(2009) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D3907-03(2008) Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4164-03 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D3907-03 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D7964/D7964M-14 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4180-03(2008) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4180-03 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4180-13 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4164-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D6175-03 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D4780-23 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM UOP333-10 Fines in Catalysts and Catalyst Supports by Sieve Analysis
ASTM D3907/D3907M-13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4164-99 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D3908-03 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM D4780-12 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM UOP602-89 Soxhlet Extraction of Catalyst
ASTM D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D4642-04(2016) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4642-92(1998) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4642-04 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D3663-99 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4782-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4781-99 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4058-96(2011)e1 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D3907-92 Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2001)
ASTM D3943-21 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4824-13(2018) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4058-96(2001) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4512-03(2018)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4058-96(2006) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4481-21 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4058-96 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4512-03 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4642-04(2010) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4824-94(1999) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM UOP602-15 Soxhlet Extraction of Catalyst
ASTM D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4824-24 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4824-03 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4824-03(2008) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4782-10 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D8393-21 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
ASTM D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D4179-01(2006) Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
ASTM UOP947-96 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
ASTM D4782-04 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D4180-99 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D3943-00 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4438-85(2001)e1 Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting
ASTM D4641-12 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
ASTM D3943-04 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4824-13 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4481-10(2015) Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4481-04 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D3943-10(2015) Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4438-85(1997) Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting
ASTM D4179-01 Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4179-88ae1 Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes
ASTM D4438-85(2007) Standard Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting
ASTM D4782-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D564-87(1996) Standard Test Methods for Liquid Paint Driers
ASTM D4926-15 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D5757-22 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM D564-87(2002) Standard Test Methods for Liquid Paint Driers
ASTM D4699-99 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM D4699-03(2008) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D3908-03(2008) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM UOP436-87 Silica in Catalysts by Gravimetric Procedure
ASTM D4481-97 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D7098-08 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7085-04(2010)e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D3943-10 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D7085-04 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D7085-04e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D5757-11(2017) Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM D4481-10 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4365-95 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM UOP742-86 Sulfate in Catalyst by a Gravimetric Method
ASTM D3908-03(2015) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM D7098-05 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D4365-95(2001) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-C019-2011 Environmentally Opportunistic Computing: Computation as Catalyst for Sustainable Design

PL-PKN

PN C89651-1986 Catalysts Method of testing Detcrmination of porosity

SCC

SPC GB/T 37360-2019 Test method of activity for rhodium carbon catalysts (TEXT OF DOCUMENT IS IN CHINESE)
SPC GB/T 37354-2019 Analytical method of chemical composition for activated carbon mercury removal catalyst (TEXT OF DOCUMENT IS IN CHINESE)
SPC GB/T 37359-2019 Test method of activity for palladium carbon catalysts (TEXT OF DOCUMENT IS IN CHINESE)
SPC GB/T 37355-2019 Test method of mercury removal rate for activated carbon mercury removal catalyst (TEXT OF DOCUMENT IS IN CHINESE)
AWWA WSC61386 Catalytic Enzyme-Based Methods for Water Treatment and Water Distribution System Decontamination
DIN 53240-1 E:2012 Draft Document - Determination of hydroxyl value - Part 1: Method without catalyst
AWWA IMTECH51381 Concept Design of Water Distribution Systems Using Genetic Algorithm Optimization
DIN 55901 E:2018 Draft Document - Driers for paints and varnishes - Methods for determination of metal contents of mixed driers

GSO

NB/SH/T 0964-2017 Determination of the attrition index of catalytic cracking catalysts - Straight tube method
NB/SH/T 0961-2017 Determination of alumina content in catalytic cracking catalysts - EDTA volumetric method
NB/SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts - Laser scattering method
NB/SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts - Flame photometry
NB/SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts - Static nitrogen adsorption capacity method
NB/SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalysts - O-phenanthroline spectrophotometric method
NB/SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts - X-ray fluorescence spectrometry

American National Standards Institute （ANSI)

ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

German Institute for Standardization

DIN 53240-1:2013 Determination of hydroxyl value - Part 1: Method without catalyst
DIN 53240-2:2007 Determination of hydroxyl value - Part 2: Method with catalyst
DIN 53240-2:1998 Determination of hydroxyl value - Part 2: Method with catalyst
DIN 55901:2018-12 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers
DIN 55901:2023-12 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers / Note: Date of issue 2023-11-17*Intended as replacement for DIN 55901 (2018-12).
DIN 55901:2018 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers

RU-GOST R

GOST 12597-1967 Sorbents. Method for determination of moisture fraction of mass in activated carbons and catalysts on their base

Universal Oil Products Company (UOP)

UOP 947-1996 LENGTH AND DIAMETER OF EXTRUDED CATALYST USING A SEMI-AUTOMATED METHOD
UOP 947-2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method

ETSI - European Telecommunications Standards Institute

ETR 247-1996 Transmission and Multiplexing (TM); Technical Report on Statistical Approach Design

European Telecommunications Standards Institute (ETSI)

ETSI ETR 247-1996 Transmission and Multiplexing (TM); Technical Report on Statistical Approach Design

AR-IRAM

IRAM 6614-1959 Test methods for the practicality of catalysts in crude oil

Japanese Industrial Standards Committee (JISC)

JIS K 6220-2:2001 Rubber compounding ingredients -- Test methods -- Part 2: Organic accelerators and vulcanizing agents

SAE - SAE International

SAE AIR5567-2009 Test Method for Catalytic Carbon Brake Disk Oxidation

Society of Automotive Engineers (SAE)

SAE AIR5567A-2020 Test Method for Catalytic Carbon Brake Disk Oxidation

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 63.1-1995 Method of Testing Liquid Line Refrigerant Driers

Korean Agency for Technology and Standards (KATS)

KS B 6399-2003 Performance evaluation method for NOx removal facilitiesby selective catalytic reduction

Others: