GB/T 33112-2016 in English

VALID

Verification method of instruments devoted to geotechnical engineering prototype monitoring

Issued on:2016-10-13
Implemented on:2017-05-01
File Format:PDF
Delivery:Via email within 5 business days

Price(USD)： $490.00
$476.00

Standard No:	GB/T 33112-2016
Document status:	VALID
Title in English:	Verification method of instruments devoted to geotechnical engineering prototype monitoring
Title in Chinese:	岩土工程原型观测专用仪器校验方法
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 5 business days
Issued on:	2016-10-13
Implemented on:	2017-05-01
ICS Classification:	07.060-Geology. Meteorology. Hydrology
Chinese Classification:	P10-Engineering investigation and geotechnical engineering in general
Professional Classification:	GB-National Standard
Related Keywords:	geotechnical engineering prototype monitoring introduction geotechnical engineering prototype observation geotechnical engineering calibration method calibration parameter requirements calibration items indoor calibration requirements
Related Topics:	Instrumental method Other Calibration Instruments Geotechnical Engineering Calibration instrument Process calibrator Special instrument three check Instrument Calibration Oriental special instrument Jiangbei special instrument special instrument Calibration method Chemical professional instrument West East Instrument Calibration Instrument Observation System with instrument Instrument Calibration+ Principle of Large Instruments Exclusive detector rock and soil Soil testing formula instrument internal observation instrument Instrument Calibration Calibration method of special instrument for geotechnical engineering prototype observation Suburban Instrument Calibration Methods Jingshan Instrument Calibration Method Southern Instrument Calibration Method Jingshan Instrument Calibration Urban Instrument Calibration Methods GBT33112 GB/T 33112-2016 Oxygen and explosion detector calibration cycle Principle and use of electrophoresis instrument Engineering instrument measurement adk Commonly used measuring instruments in engineering What instruments are used to measure elevation in engineering surveys? Water measuring instrument calibration method Calibration method of intelligent air tightness tester Geotechnical instrument calibration Testing instrument calibration standards Calibration method of two-dimensional altimeter probe and needle Method validation uses multiple instruments

《GB/T 33112-2016岩土工程原型观测专用仪器校验方法》由332（水利部）归口，主管部门为水利部。

Introduction

1. Background and purpose of the standard

This standard GB/T33112-2016 "Calibration Method for Special Instruments for Geotechnical Engineering Prototype Observation" was officially implemented on May 1, 2017, and was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China. This standard aims to unify the calibration process and methods of various monitoring instruments in the field of geotechnical engineering to ensure the accuracy and reliability of measurement data.

2. Calibration parameter requirements

Calibration items	Indoor calibration requirements	On-site calibration requirements
Accuracy	Non-linearity≤2.0%FS	Maximum difference in measurement stability≤3×10⁻⁴
Temperature parameters	Measurement error±0.5℃	The impact of temperature fluctuation on the measured value must meet the requirements
Insulation resistance	≥50MΩ	≥10MΩ

3. Calibration conditions and equipment

Indoor calibration conditions:

Temperature: (23±5)℃
Relative humidity: 25%~75%

Field calibration conditions:

Temperature range: 0℃~45℃
Relative humidity: ≤95%

More samples: GB 50021-2001(2009) DL/T 5154-2012 JC/T 2453-2018

Sample only — not a preview of GB/T 33112-2016

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 4935.2-2009 in English

Instrument for soil test—Oedometer—Part 2:Pneumatic oedometer
2009-06-12
GB/T 15406-2007 in English

Primary parameter and general specification for geotechnical engineering instrument
2007-06-11
GB/T 21029-2007 in English

Series and type spectrum of geotechnical engineering instrument
2007-06-11
GB/T 24105-2009 in English

Basic conditions and methods of environmental test for geotechnical engineering instrument
2009-06-12
GB/T 32747-2016 in English

Safety requirements for geotechnical engineering instruments
2016-06-14
GB/T 37367-2019 in English

Geotechnical engineering instrument—Displacement meters
2019-05-10
GB/T 21440.1-2008 in English

Instrument for dam monitoring—Settlement gauge—Part 1：Hydraulic overflow settlement gauge
2008-02-15
GB/T 3408.1-2008 in English

Instrument for dam monitoring - Strain meter - Part 1: Unbonded elastic wire resistance strain meter
2008-02-15
GB/T 41192-2021 in English

Instrument for geotechnical engineering―Vibrating wire load cell
2021-12-31