Jingshan Instrument Calibration

Jingshan Instrument Calibration, Total:215 items.

The international standard classification for "Jingshan Instrument Calibration" includes: Electricity. Magnetism. Electrical and magnetic measurements , Optics and optical measurements , Geology. Meteorology. Hydrology , Hydraulic energy engineering , Flow in closed conduits , Radiographic equipment , Mechanical testing of metals , Head protective equipment , Glass in general , Exploratory and extraction equipment .

The Chinese standard classification for "Jingshan Instrument Calibration" includes: Electromagnetic Measurement , Radio Measurement , Optical Measurement , Hydrology and water conservancy instrument , Flow capacity and material level instrument , Medical radiographic equipment , Force and deformation test instrument , Nuclear instrument for exploration mining and technological detection , Engineering investigation and geotechnical engineering in general , Water conservancy and water power engineering in general , Laboratory glass, ceramic and plastic vessel , Petroleum geology exploration , Geophysical search equipment .

National Metrological Verification Regulations of the People's Republic of China

JJG(轻工) 83-1991 Verification Regulations for BMP-2 Quartz Clock Instrument Accuracy Calibrator
JJG(船舶) 17-1998 Sound Intensity Meter Performance Calibration Regulations
JJG(民航) 012-1995 Verification Regulation of Electrical Power fault sensor Test Bench“ПAП-33”
JJG 802-2019 Distortion Meter Calibrators
JJG 1193-2023 Calibrator of AC Charging Piles for Electric Vehicles
JJG 169-2010 Verification regulation of transformer test set
JJG 169-1993 Verification Regulation of Instrument Transformer Test Set
JJG(民航) 008-1995 Verification Regulation of Autopilot System Test Bench "ПРК-3"
JJG(轻工) 79-1991 Calibration rules for watch instrument calibrator
JJG(轻工) 82-1991 Calibration Regulations for Quartz Watch Calibrator
JJG 278-2002 Verification Regulation of Oscilloscope Calibrator
JJG(轻工) 81-1991 Calibration rules for mechanical clock calibrator
JJG 779-1992 Cheker of Speed And Mr lege Messr For Cars
JJG(民航) 009-1995 Verification Regulation of Go-Around Test Bench "ПРК-19"
JJG 1001-2005 Verification Regulation of Calibrators for Near Headlamp Tester of Motor Vehicle
JJG 1196-2023 DC Instrument Transformers Test Set
JJG(民航) 007-1995 Verification Regulation of Temperature Indicator Test Bench "УПТ-1M"

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织) 088-2020 Calibration Specification for Thermal Protective Performance Testers
JJF(机械) 021-2008 Calibration specification for armature tester
JJF(纺织) 068-2016 Calibration Specification for Vertical Combustion Tester
JJF(石化)044-2021 Calibration Specification for Oxidizing Liquids Test Device
JJF 1923-2021 Calibration Specification for Verification Equipment of Electrical Measuring Devices
JJF 1284-2011 Calibration Specification of Calibrators for Electrical Meters
JJF(石化) 013-2018 Calibration Specification for Pressure Tester for Stackability
JJF(石化)043-2021 Calibration specifications for self-heating material testers
JJF(机械) 004-2008 Calibration specification for portable power transmitter calibrator
JJF(石化)009-2018 Calibration Specification for Scratch Testers
JJF 1400-2013 Calibration Specification for Time Relay Testers
JJF(石化) 001-2015 Calibration Specification for Paint Film Scrub Resistance Testers
JJF(石化) 030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
JJF(纺织)068-2018 Calibration Specification for Vertical Combustion Testers
JJF(石化)030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
JJF(纺织)068-2016 Calibration Specification for Vertical Combustion Tester
JJF 1995-2022 Calibration Specification for Electronic Instrument Transformers Test Set
JJF(石化) 009-2018 Calibration Specification for Scratch Testers
JJF(纺织) 051-2006 Calibration specification for insolation and climate tester
JJF(石化)013-2018 Calibration Specification for Pressure Tester for Stackability
JJF 1472-2014 Calibration Specification for Process Calibrators
JJF(纺织) 068-2018 Calibration specification for vertical combustion tester
JJF 1294-2011 Calibration Specification for Transduccers of Ultrasonic Flaw Detector
JJF 1667-2017 Calibration Specification for Harmonics Analyzing Instruments at Power Frequency
JJF 1203-2008 Calibration Specification for Electro-acoustic Products(Loudspeakers) Power Life-span Measurement Equipments
JJF 2027-2023 Calibration Specification for Transformer Merging Unit Test Set
JJF 1941-2021 Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle
JJF 2118-2024 Calibration Specification for Pressure Type SF6 Gas Density Monitor Calibrators
JJF 1201-2008 Calibration Specification for Hearing Aids Measurement Instruments
JJF 1320-2011 Calibration Specification for Instrumented Charpy Pendulum Impact Testing Machines
JJF(机械) 1053-2020 Calibration specification for glow wire tester
JJF(机械)1053-2020 Calibration specification for glow wire tester
JJF(纺织)088-2020 Calibration Specification for Thermal Protective Performance Testers
JJF 1860-2020 Calibration Specification for Defibrillator Analyzers
JJF(石化)001-2015 Calibration Specification for Paint Film Scrub Resistance Testers
JJF 1374-2012 Calibration Specification for Elevator Overspeed Governor Testers

Professional Standard - Machinery

JB/T 9306-1999 Technical specification for transformer calibrator

Professional Standard - Coal

MT 59-1981 AJH type oxygen breathing apparatus calibrator

Henan Provincial Standard of the People's Republic of China

DB41/T 1041-2015 Pressure Type Sulfur Hexafluoride Gas Density Controller Calibrator
DB41/T 1445-2017 clock calibrator
DB41/T 913-2014 AC and DC indicating instrument calibration device

Professional Standard - Electricity

DL/T 1394-2014 Technical Requirement of Electronic Current and Voltage Transformer Error Test Sets
DL/T 1258-2013 General Technical Requirement of Instrument Transformer Error Test Sets
DL/T 2187-2020 General technical specification of DC instrument transformers test set

Professional Standard - Water Conservancy

SL 122-2012 Calibrating methods of measurement instrument of rock deformation
SL 131-2017 SL/T 131-2017 (Calibration method for apparatus measuring slump of concrete)
SL 412-2007 Calibrating code for bitumen penetrometers
SL 112-1995 Calibration method for compaction test apparatus
SL 410-2007 Calibrating code for dynamic perforation test(con-drop test)instrument
SL 133-2014 Calibration methods for water permeability testing instrument of concrete
SL 131-1995 Method for calibration of apparatus for concrete slump test
SL 413-2007 Calibration code for bitumen ductility meter
SL 407-2007 Calibrating code for permeability testing instrument of geomembranes
SL 137-1995 Calibration method for length meter
SL 121-2012 Calibrating methods of rock direct shear testing instrument
SL 409-2007 Calibrating code for flow testing instrument prefabricated drains
SL 115-2014 Permeameter Calibration Method
SL 408-2007 Calibrating code for impermeability testing instrument of geomembranes
SL 112-2017 SL/T 112-2017 Code for calibration of compaction apparatus
SL 118-2014 Code for calibration of strain-controlled triaxial apparatus
SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 116-1995 Calibration method for strain-controlled direct shear apparatus
SL/T 233-1999 Verification method of common instrument in hydraulic and river model
SL 121-1995 Calibrating Methods of Rock Direct Shear Testing Instrument
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment
SL 144.8-2008 calibration methods of water environmental detecting instrument and equipment calibration method of microwave heating system
SL 119-2012 Calibrating Methods of Rock Triaxial Testing Apparatus
SL 114-1995 Calibration method for lever consolidometer
SL 116-2012 Calibration method for strain-controlled direct shear apparatus
SL 119-1995 Calibrating Methods of Rock Treaxial Testing Apparatus
SL 118-1995 Calibration method for strain-controlled triaxial apparatus
SL 414-2007 Calibration code for bitumen softening meter
SL 233-2016 Calibration methods of commonly used instruments for hydraulic and river engineering model tests
SL 114-2014 Code for calibration of oedometers
SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
SL 144.9-2008 calibration methods of water environmental detecting instrument and equipment calibration method of accelerated solvent extractor(ase)
SL 122-1995 Calibrating Methods of Measurement Instrument of Rock
SL 133-1995 Calibration method for concrete impevious apparatus

水利部

SL/T 118-2014 Calibration method of strain controlled triaxial instrument
SL/T 133-2014 Calibration method of concrete impermeability meter
SL/T 131-2017 Calibration method of concrete slump meter
SL/T 124-2014 Calibration method of cement hydration heat meter
SL/T 115-2014 Penetration meter calibration method
SL 509-2012 Calibration method for grouting recorder
SL/T 114-2014 Consolidation instrument calibration method
SL/T 233-2016 Commonly used instrument calibration methods for hydraulic and river engineering model tests
SL/T 112-2017 Compaction instrument calibration method
SL/T 756-2017 Calibration method of special instruments for geotechnical in-situ testing

Hubei Provincial Standard of the People's Republic of China

DB42/T 628-2010 Calibration specfication of multifunction calibrator for electric measuring instruments,transducters and AC sampling equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10254-1988 Calibration for radiation protection instruments beta doseratemeters
GB/T 20013.4-2010 Nuclear medicine instrumentation—Routine tests— Part 4:Radionuclide calibrator
GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines
GB/T 25918-2010 Portable calibration instrument for water meters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33112-2016 Verification method of instruments devoted to geotechnical engineering prototype monitoring

Group Standards of the People's Republic of China

T/CMA YX129-2024 Calibration Method for Dissolution Testers
T/CMA JD006-2019 Calibrators for Headlamp Tester of Motor Vehicle
T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment
T/SSM 002-2019 On-site Calibrator for Alternating-current Electric Energy Meter
T/HBJLXH 006-2023 Ball pressure tester calibration method

Professional Standard - Energy

DL/T 2458-2021 General technical specification for DC instrument transformers transient test set

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40961-2021 Calibration methods of rock triaxial testing apparatus
GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1341-2018 Specification for calibration of electronic scanner for carded cashmere hand row length chart

Professional Standard - Petroleum

SY 6639-2012 Geophone Tester Calibration Method
SY/T 6639-2005 The calibration method of geophone tester
SY/T 6639-2012 Calibration Method for Geophone Tester

Military Standard of the People's Republic of China-General Armament Department

GJB 1692-1993 Flight test instrument calibration requirements

Professional Standard - Geology

DZ 0023-1991 General technical conditions for gradienter calibration board

CN-QIYE

Q/GDW 1897-2013 Communication protocol for transformer calibrator

US-FCR

FCR COE RPMAS 49570-1978 CALIBRATION OF INSTRUMENTATION

BSI

SN-CWA 18133:2024 Raman instruments calibration and verification protocols

American National Standards Institute （ANSI)

ANSI N323A-1997 Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments
ANSI N323A/B-2013 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323-1978(R1991) Radiation Protection Instrumentation Test and Calibration
ANSI N323C-2009 Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
ANSI N323B-2003 Installed Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments for Near Background Operation
ANSI N323ab-2014 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

CZ-CSN

CSN 24 3598-1961 Gauges for adjusting of instruments
CSN 99 4179-1990 Grain testers. Methods of verification and calibrating

American Society for Testing and Materials (ASTM)

ASTM RR-E28-1009 1989 E0074-Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM E74-18 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E542-22 Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments
ASTM E542-01(2021) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E556-95(2006) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE N323A-1997 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE N323A/COR-2004 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE N323C-2009 American National Standard Radiation Protection Instrumentation Test and Calibration Air Monitoring Instruments

Japanese Industrial Standards Committee (JISC)

JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7728:2002 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7728:2013 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7602:2009 Calibration and test method for force-proving instruments
JIS C 1515:1991 Sound calibrators

U.S. Air Force

AIR FORCE A-A-59419 A-2005 CALIBRATOR, THERMOMETER

GSO

GSO ASTM E74:2022 Standard Practices for Calibration and Verification for Force-Measuring Instruments
BH GSO ASTM E74:2023 Standard Practices for Calibration and Verification for Force-Measuring Instruments
OS GSO OIML R141:2013 Procedure for calibration and verification of the main characteristics of the thermographic instruments
BH GSO OIML R141:2015 Procedure for calibration and verification of the main characteristics of the thermographic instruments
GSO ISO 18899:2014 Rubber -- Guide to the calibration of test equipment
OS GSO ISO 376:2016 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
GSO ISO 376:2016 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
BH GSO ISO 376:2017 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
OS GSO IEC 62089:2014 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
GSO IEC 62089:2014 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
BH GSO IEC 62089:2016 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
BH GSO ISO 4965-2:2022 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
OS GSO OIML D10:2010 Guidelines for the determination of calibration intervals of measuring instruments
GSO ISO 4965-2:2021 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation

Standard Association of Australia （SAA）

AS Z43.3:1969 Instrumentation for audiometry - Reference coupler for the calibration of earphones used in audiometry

Korean Agency for Technology and Standards (KATS)

KS B ISO 9342:2013 Optics and optical instruments ― test lenses for calibration of focimeters
KS B ISO 9342:2003 Optics and optical instruments-Test lenses for calibration of focimeters
KS B ISO 9342-2013(2018) Optics and optical instruments ― test lenses for calibration of focimeters
KS C IEC TR 61948-4:2021 Nuclear medicine instrumentation — Routine tests —Part 4: Radionuclide calibrators
KS C IEC TR 61948-4:2017 Nuclear medicine instrumentation ─ Routine tests ─ Part 4: Radionuclide calibrators
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers

British Standards Institution (BSI)

BS 6393:1987 Specification for calibration of stylus instruments
BS 7935-2:2004 Constant amplitude force calibration - Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems - Method
BS 812-100:1990 Testing aggregates. General requirements for apparatus and calibration
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 4965-2:2012(2013) Metallic materials — Dynamic force calibration for uniaxial fatigue testing Part 2 : Dynamic calibration device (DCD) instrumentation

European Committee for Standardization (CEN)

EN ISO 9342:1998 Optics and Optical Instruments - Test Lenses for Calibration of Focimeters ISO 9342:1996; Superseded by EN ISO 9342-1:2005

International Organization for Standardization (ISO)

ISO 9342:1996 Optics and optical instruments - Test lenses for calibration of focimeters
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 18898:2016 Rubber - Calibration and verification of hardness testers

KR-KS

KS B ISO 9342-2023 Optics and optical instruments — Test lenses for calibration of focimeters
KS C IEC TR 61948-4-2017 Nuclear medicine instrumentation ─ Routine tests ─ Part 4: Radionuclide calibrators
KS C IEC TR 61948-4-2021 Nuclear medicine instrumentation — Routine tests —Part 4: Radionuclide calibrators

Association Francaise de Normalisation

NF S12-134:1998 Optics and optical instruments. Test lenses for calibration of focimeters.
NF A03-003*NF EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.

Danish Standards Foundation

DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

RO-ASRO

STAS 8230-1968 machine tool. Plane correction instrument terminology

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE N323A ERTA-2004 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE N323AB-2013 Radiation Protection Instrumentation Test and Calibration@ Portable Survey Instruments
IEEE N323-1978 Radiation Protection Instrumentation Test and Calibration

RU-GOST R

GOST R 8.908-2015 State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers

SCC

DANSK DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS PD IEC TR 61948-4:2019 Nuclear medicine instrumentation. Routine tests-Radionuclide calibrators
BS PD IEC/TR 61948-4:2007 Nuclear medicine instrumentation. Routine tests-Radionuclide calibrators

Indonesia Standards

SNI IEC/TR 61948-4:2012 Nuclear medicine instrumentation - Routine test - Part 4: Radionuclide calibrators

International Electrotechnical Commission (IEC)

IEC TR 61948-4:2019 RLV Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators
IEC TR 61948-4:2019 Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators

German Institute for Standardization

DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.

API - American Petroleum Institute

API STD 2531 C4 S2-1963 MECHANICAL DISPLACEMENT METER PROVERS (Second Edition)
API STD 2531-1963 MECHANICAL DISPLACEMENT METER PROVERS (First Edition)

CN-STDBOOK

图书 3-9797 General rules and calibration specifications for instrument analysis methods in colleges and universities (1)

VN-TCVN

TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity

Spanish Association for Standardization (UNE)

UNE-EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Lithuanian Standards Office

LST EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

European Committee for Electrotechnical Standardization（CENELEC）

HD 87-1977 Testing and Calibration of Ultrasonic Therapeutic Equipment

American Gear Manufacturers Association

AGMA 2113-A97-1997 Measuring Instrument Calibration, Gear Tooth Alignment Measurement

AGMA - American Gear Manufacturers Association

2113-A97-1997 Measuring Instrument Calibration@ Gear Tooth Alignment Measurement

SE-SIS

SIS SS-ISO 5436:1990 Calibration specimens — Stylus instruments — Types, calibration and use of specimens