GB/T 33643-2022 in English
VALIDNon-destructive testing—Test methods for leak detection by means of acoustic emission
- Issued on:2022-03-09
- Implemented on:2022-10-01
- File Format:PDF
- Delivery:Via email within 5 business days
$388.00
《GB/T 33643-2022无损检测 声发射泄漏检测方法》由TC56(全国无损检测标准化技术委员会)归口,主管部门为国家标准化管理委员会。
Introduction
Core Technical Specifications of GB/T33643-2022 Standard
Comparison of Core Revision Features
| Indicator Items | 2017 Edition | 2022 New Edition |
|---|---|---|
| Sensor Protection Level | Undefined | Mandatory Requirement to Reach IP68 |
| Pressure Indicator | Independent Chapter Provisions | All Deleted |
| Measurement Parameter System | Basic Parameter Group | Newly Added Cross-Correlation Time Difference Positioning Indicator |
Key Performance Indicators of Acoustic Emission Detection System
According to Appendix A of the document: sensor cable attenuation needs to be <1dB/30m, and the baseline value of longitudinal wave sensitivity is -77dB (1V/μbar). Multi-channel system requirements:
- Amplitude acquisition accuracy ±2dB
- Correlation time difference calculation error ≤0.25μs
- Dynamic range of more than 64dB guaranteed
Analysis of leakage characteristic spectrum in typical scenarios
Practical Tank Bottom Plate Detection
When applying the full array waveguide positioning algorithm, it is recommended to use a double-row sensor layout for open tanks with a horizontal spacing of <15m. Signal acquisition must meet the following requirements:
- Benchmark static time ≥ 24 hours
- Dynamic pressure holding sampling time ≥ 60 minutes
- Turbulence discrimination threshold not less than 76dB
New pipeline online detection solution (Comparison in Table B.1)
| Media type | Recommended frequency | Typical leak detection distance | Feasible pressure difference |
|---|---|---|---|
| Liquefied natural gas | 15-80kHz | 50-90m | 3.2MPa |
| Crude oil | 8-40kHz | 120-200m | ≥5.0MPa |
Guide to major innovation points
The new standard deletes the old version of the safety requirements chapter and adds:
- Magnetic clamp Non-destructive fixation specification
- Gas-liquid two-phase medium hazard level evaluation matrix
- Tighten the gradient indication verification process control (Chapter 9.2)

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/Z 43410-2023 in English
Non-destructive testing—Automated ultrasonic testing—Selection and application of systems
2023-11-27 -

GB/T 46978-2026 in English
Non-destructive testing—Methods of alternating current field measurement (ACFM) for metal structures
2026-01-28 -

GB/T 7704-2017/XG1-2023 in English
Non-destructive testing-Practice for residual stress measurement by X-ray, includes Amendment 1
2023-05-23 -

GB/T 5616-2014 in English
Non-destructive Testing - Guidelines for Application
2014-05-06 -

GB/T 44525-2024 in English
Non-destructive testing—Ultrasonic testing—Specification for resin matrix composite reference block
2024-09-29 -

GB/T 15823-2009 in English
Non-destructive testing - Test methods for helium leak testing
2009-05-26 -

GB/T 18694-2002 in English
Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field
2002-03-10 -

GB/T 41856.1-2022 in English
Non-destructive testing—Industrial endoscopy visual testing—Part 1:Method
2022-10-12