GB/T 33881-2017 in English
VALIDAluminum alloy plats, sheets and strips for tank truck
- Issued on:2017-07-12
- Implemented on:2018-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$136.00
| Standard No: | GB/T 33881-2017 |
| Document status: | VALID |
| Title in English: | Aluminum alloy plats, sheets and strips for tank truck |
| Title in Chinese: | 罐车用铝合金板、带材 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2017-07-12 |
| Implemented on: | 2018-02-01 |
| ICS Classification: | 77.150.10-Aluminium products |
| Chinese Classification: | H61-Light metals and their alloys |
| Professional Classification: | GB-National Standard |
| Related Keywords: | aluminum alloy plats
aluminum alloy plates tank truck introduction gb/t tank trucks alloy plates |
| Related Topics: | Aluminum alloy plate
Aluminum can parameters Aluminum alloy sheet Aluminum can parameters GB/T 33881-2017 Strip Aluminum strip layer Safe Aluminum Cans tanker Aluminum jug Association Aluminum Cans GBT33881 GB/T 33881-2017 Aluminum alloy plate strength Tank truck aluminum alloy tank body European aluminum alloy plate standards |
《GB/T 33881-2017罐车用铝合金板、带材》由TC243（全国有色金属标准化技术委员会）归口，TC243SC1（全国有色金属标准化技术委员会轻金属分会）执行，主管部门为中国有色金属工业协会。
Introduction
GB/T 33881—2017 Standard Foreword
This standard was drafted in accordance with the rules given in GB/T1.1-2009, and mainly specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates and order (or contract) contents of aluminum alloy plates and strips for tank trucks. It is applicable to aluminum alloy plates and strips for road transport tank trucks.
1. Main technical requirements
1.1 Product classification and brand
| Brand | State | Plate specification | Strip specification |
|---|---|---|---|
| 5454, 5754, 5182, 5086, 5186, 5088 | O, H111 | Thickness: 3.00～12.00 mm Width: no specific limit | Thickness: 3.00～12.00 mm Width: 1000～2600 mm |
| 5059 | O, H111, H112 | Thickness: no specific limit | Thickness: 3.00～12.00 mm Width: 1000～2600 mm |
| 5383, 5083 | O, H111, H116, H321 | No specific limit | No specific limit |
1.2 Chemical composition requirements
Table 2 specifies the chemical composition of 5059, 5088, 5186, 5383 grades. Other grades shall comply with GB/T3190.
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Others b single | Total |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5059 | 0.45 | 0.50 | 0.25 | 0.6~1.2 | 5.0~6.0 | < td>0.250.40～0.9 | 0.20 | 0.05～0.25 | 0.05 | Margin | |
| 5383 | 0.25 | 0.25 | 0.20 | 0.7~1.0 | 4.0~5.2< /td> | 0.25 | 0.40 | 0.15 | 0.20 | 0.05 | Margin |
1.3 Dimensional deviation requirements
Table 3 specifies the allowable deviations of thickness, width, length and other dimensions, as follows:
| Thickness | ≤1250 mm | >1250~1600 mm mm | >1600～2000 mm | >2000～2600 mm |
|---|---|---|---|---|
| 3.00~3.50 mm | +0.28 0 | +0.28 0 | +0.30 0 | +0.40 0 |
| >3.50~6.00 mm | +0.32 0 | +0.32 0 | +0.40 0 | +0.45 0 |
| >6.00~8.00 mm | +0.38 0 | +0.45 0 | +0.50 0 | +0.60 0 |
| >8.00～12.00 mm | +0.45 0 | +0.55 0 | +0.65 0 | +0.80 0 |
2. Tensile Mechanical Properties and Bending Radius
2.1 Room Temperature Tensile Test Results
Table 4 specifies the requirements for tensile strength, yield strength and elongation at break for different alloys, states and thicknesses, as follows:
| Alloy | State | Thicknesst | 5454 | O、H111 | 3.00~6.00 | 215~285 | ≥85 | ≥24 |
|---|---|---|---|---|---|---|---|---|
| 5754 | O、H111 | >6.00~12.00 | 190~240 | ≥80 | ≥19 |
3. Implementation Suggestions
To ensure that aluminum alloy plates and strips for tank trucks comply with GB/T 33881-2017 standard, it is recommended that:
- Select products of appropriate brand and state, and customize size specifications according to specific needs.
- Strictly control the chemical composition to ensure that it meets the requirements of Table 2 or GB/T3190.
- During the processing, pay attention to maintaining the flatness of the plate to avoid deformation that affects the performance.
- Periodically conduct quality inspections on the production process and keep relevant inspection records.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 38106-2019 in English
Aluminum and aluminum alloy plates and sheets for pressure vessel
2019-10-18 -
GB/T 33824-2025 in English
Aluminium and aluminium alloys sheet and strip for cans and caps of new energy power batteries
2025-08-01 -
GB/T 42791-2024 in English
General technical specification for aluminium alloy forgings for aviation products
2024-03-15 -
GB/T 24486-2009 in English
Aluminium alloy wires for cable braiding
2009-10-30 -
GB/T 14846-2014 in English
Tolerances on dimensions and form of aluminium and aluminium alloy extruded profiles
2014-12-05 -
GB/T 20250-2006 in English
Aluminum and aluminum alloys continue extruded tubes
2006-05-08 -
GB/T 5237.1-2017 in English
Wrought aluminium alloy extruded profiles for architecture - Part 1: Mill finish profiles
2017-10-14
