GB/T 3524-2015 in English

《GB/T 3524-2015碳素结构钢和低合金结构钢热轧钢带》由TC183（全国钢标准化技术委员会）归口，TC183SC2（全国钢标准化技术委员会基础分会）执行，主管部门为中国钢铁工业协会。
本标准规定了碳素结构钢和低合金结构钢热轧钢带的分类和代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。
本标准适用于厚度不大于12.00mm、宽度不大于600mm 的碳素结构钢和低合金结构钢热轧钢带(以下简称“钢带”)。

1 Scope

This standard specifies the classification and code, ordering information, the dimension, shape, weight and permissible deviation, technical requirements, test methods, acceptance rules and the packaging, marking and quality certificate, etc., of hot-rolled carbon and low alloy structural steel strips.
This standard is applicable to hot-rolled carbon and low alloy structural steel strips (hereinafter referred to as "steel strips") with thickness ≤12.00mm and width ≤600mm.

2 Normative References

The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.9 Iron, Steel and Alloy - Determination of Aluminium Content - Chrom Azurol S Photometric Method
GB/T 223.11 Iron Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Iron Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method
GB/T 223.32 Methods for Chemical Analysis of Iron, Steel and Alloy - The Hypophosphite Reduction - Iodimetric Method for the Determination of Arsenic Content
GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy - The Indophenal Blue Photometric Methods for the Determination of Nitrogen Content after Distillation Separation
GB/T 223.40 Iron Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite-sodium Nitrite Titrimetric Method for the Determination of Manganese Content
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.64 Iron Steel and Alloy- Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.71 Methods for Chemical Analysis of Iron, Steel and Alloy - The Gravimetric Method after Combustion in the Pipe Furnace for the Determination of Carbon Content
GB/T 223.72 Iron Steel and Alloy - Determination of Sulfur Content - Gravimetric Method
GB/T 228.1 Metallic Material - Tensile Test - Part 1: Method of Test at Room Temperature
GB/T 232 Metallic Materials - Bend Test
GB/T 247 General Rule of Package Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 700 Carbon Structural Steels
GB/T 1591 High Strength Low Alloy Structural Steels
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
GB/T 8170 Rules of Rounding Off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 17505 Steel and Steel Products: General Technical Delivery Requirements
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition

3 Classification and Code

3.1 Based on edge states, it is classified as:
a) Trimmed: EC;
b) Untrimmed: EM.
3.2 Based on the thickness precision, it is classified as:
a) Common thickness precision: PT.A;
b) High thickness precision: PT.B.

Foreword II
1 Scope
2 Normative References
3 Classification and Code
4 Ordering Information
5 Dimension, Shape, Weight and Their Permissible Deviations
6 Technical Requirements
7 Test Methods
8 Inspection Rules
9 Packaging, Marking and Quality Certificate
10 Rounding off of Numerical Values