Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
test items extreme test overspeed test no-load test load test economical maintenance intervals vanadium samples radioactive material retention introductiona standard
GB/T 40082-2021 in English

GB/T 40082-2021 in English

VALID

Wind turbines—Drive train ground test specification

  • Issued on:2021-04-30
  • Implemented on:2021-11-01
  • File Format:PDF
  • Delivery:Via email within 5 business days
Price(USD): $400.00
$388.00

《GB/T 40082-2021风力发电机组 传动链地面测试技术规范》由TC50(全国风力发电标准化技术委员会)归口,主管部门为中国机械工业联合会。


Introduction

Analysis of the core content of the standard

This standard specifies the full-process technical requirements for ground testing of the transmission chain performance of variable speed constant frequency wind turbine generator sets, covering 7 categories and 14 key tests, mainly including:

  • Basic mechanical performance test (dynamic balance, inertia, etc.)
  • Electrical characteristics verification (voltage distortion, grid adaptability)
  • System dynamic response test (damping, semi-physical simulation)
  • Extreme working condition verification (overspeed, overload)

Comparison of key technical requirements

Test items Accuracy requirements Equipment specifications Evaluation standards
Torque ripple <1% of rated value 0.5-level dynamometer GB/T9239.1
Vibration test 0.2mm/s 200Hz response frequency GB/T35854
Grid adaptability THD<3% Class A electrical measuring instrument GB/T36994

Detailed explanation of typical test methods

7.5 Key points for the implementation of overspeed test

The test requires the use of The inverter drives the generator to 1.2 times the rated speed for 2 minutes:

  1. Gearbox models shall evaluate vibration according to GB/T35854
  2. Direct drive models shall refer to GB/T25389.1 standard
  3. Focus on checking spindle deformation and bearing damage

Standard implementation recommendations

Laboratory construction requirements

  • The flatness of the basic platform must reach GB/T22095-2008 Level 3
  • Drive system torque control accuracy ≤1%
  • Equipped with dual circuits for emergency stop (GB/T5226.1)

Test process optimization

It is recommended to perform the test items in the following order:

Appearance inspection → no-load test (7.1-7.7) → load test (7.8-7.12) → extreme test (7.13-7.14)

Sample only — not a preview of GB/T 40082-2021
Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend