GB/T 40863-2021 in English
VALIDAssessment technical specification for eco-design product—Motor products
- Issued on:2021-10-11
- Implemented on:2022-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
《GB/T 40863-2021生态设计产品评价技术规范 电动机产品》由TC297（全国电工电子产品与系统的环境标准化技术委员会）归口，TC297SC2（全国电工电子产品与系统的环境标准化技术委员会环境设计分会）执行，主管部门为国家标准化管理委员会。
Introduction
Interpretation of the core content of the standard
| Evaluation dimensions | Three-phase asynchronous motor | Small power motor |
|---|---|---|
| Energy efficiency requirements | Low voltage: IE3 and above High voltage: Level 2 and above | ≥120W: IE3 ＜120W: Level 2 energy efficiency |
| Material usage | The unit usage of stator copper/silicon steel/rotor aluminum (copper) needs to be calculated | Detection requirements for restricted substances in plastic parts |
| Renewable utilization rate | Calculated according to GB/T32355.5 | ≥70% |
Key technical requirements
Life cycle assessment shall be carried out in accordance with GB/T24040-2008, GB/T24044 and GB/T40100, with key assessments on:
- Resource consumption index at the raw material acquisition stage
- Unit product comprehensive energy consumption in the production process (refer to JB/T12731)
- Material recyclability at the scrap stage
Restricted substance control
Special provisions for small power motors:
- Six restricted substances (lead, mercury, etc.) must comply with the limits of GB/T26572
- Short-chain chlorinated paraffins (SCCPs) in plastic parts ≤0.15%
- The content of a single phthalate ester ≤0.1%
Implementation suggestions
- In the design phase, recyclable packaging materials that comply with GB/T18455 should be given priority
- In the production phase, a material usage record should be established (refer to the calculation formula in Appendix A)
- Testing and verification The noise test must meet both no-load and load requirements (GB/T10069 series)
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/Z 250-2026 in English
Guidance on material circular considerations in environmentally conscious design of electrical and electronic products
2026-08-27 -
GB/T 6988.1-2024 in English
Preparation of documents used in electrotechnology—Part 1: Rules
2024-09-29 -
GB/T 23687-2009 in English
Guide of environmentally conscious design for ICT & CE products
2009-04-20 -
GB/T 16679.1-2024 in English
Industrial systems，installations and equipment and industrial products—Designation of signals—Part 1:Basic rules
2024-08-23 -
GB/T 15543-2008 in English
Power quality—Three-phase voltage
2008-06-18 -
GB/T 3926-2007 in English
Rated voltages for medium frequency equipment
2007-07-11 -
GB/T 24337-2009 in English
Power quality—Interharmonics in public supply network
2009-09-30 -
GB/T 6988.5-2006 in English
Preparation of documents used in electrotechnology - Part 5: Index
2006-07-13 -
GB/T 10593.1-2005 in English
Measuring methods of environmental parameters for electric and electronic products - Part 1: Vibration
2005-08-26 -
GB/T 46737-2025 in English
Guidance for evaluation of zero-carbon factory in electrical and electronic industry
2025-10-31
