Product testing equipment machine

Product testing equipment machine, Total:403 items.

The international standard classification for "Product testing equipment machine" includes: Aircraft and space vehicles in general , Environmental testing , Sterilization and disinfection in general , Electrical and electronic testing , Electrical wires and cables in general , Electrical engineering in general , Mechanical testing , audio, video and audiovisual systems in general .

The Chinese standard classification for "Product testing equipment machine" includes: Reliability , Basic standards and general methods , Public medical equipment , Highway vehicle utilization, maintenance and service , Standardization and quality management , Cable and its accessory , Environmental protection equipment , Metal mechanical property test method , Video and pulse system equipment , Technical management , Marking, packaing, transport and storage .

Group Standards of the People's Republic of China

T/WLJC 106-2022 Designof three-dimensional for machine tool products General principles of drawing configure
T/WLJC 105-2022 Designof three-dimensional for Machine tool products General requirements
T/WLJC 114-2022 Designof three-dimensional for Machine tool products Indication of technological symbols
T/CIET 19-2023 Push rod motor load test equipment
T/QGCML 4381-2024 Mechanical sealing equipment for sterile products
T/CMIF 242-2024 Technical specifications for green-design product assessment—Mechanical parking systems
T/WLJC 108-2022 Designof three-dimensional for Machine tool products General principles of drawings presentation
T/WLJC 107-2022 Designof three-dimensional for Machine tool products General principles of drawings protract
T/CRAAS 1131-2022 Performance Evaluation of Fan Coil Units for Export of Refrigeration and Air Conditioning Equipment
T/WLJC 109-2022 Designof three-dimensional for Machine tool products General principles of dimensioning
T/QME 0301-2021 Design specification of recovery device for powder product line in exhaust of spray dryer
T/WLJC 103-2021 Machine tool products—Green design standardization guide
T/ZGM 004-2024 Green product commercial water purification equipment
T/WLJC 110-2022 Designof three-dimensional for Machine tool products General principles of tolerance dimensioning
T/CAQI 135-2020 Product Quality Appraisal Program Standardizes Special Requirements for Mechanical Equipment
T/WLJC 115-2022 Designof three-dimensional for Machine tool products Synthesize show request of product drawings
T/WLJC 113-2022 Designof three-dimensional for Machine tool products Indication of design symbols
T/ZGM 003-2024 Green product household drinking water treatment equipment
T/CEEIA 668-2023 Assessment specification of green design product—Arc welding equipment

Professional Standard - Aerospace

QJ 3051-1998 Design Criteria for Testing Character of Space Products
QJ 1986-1990 Environmental Test Equipment Manual for Aerospace Products
QJ 2243-1992 Naming method of ground equipment products

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5170.11-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Corrosive gas testing equipments
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments
GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Combined high and low temperature/low air pressure testing�equipments
GB/T 5170.8-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Salt mist testing equipments
GB/T 5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Temperature testing equipments
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products—Salt mist testing equipments
GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products - General
GB/T 5170.5-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Damp heat testing equipments
GB/T 5170.20-1990 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Water testing equipments
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products - Damp heat testing equipments
GB/T 24628-2009 Sterilization of health care products—Biological and chemical indicators—Test equipment
GB/T 13666-1992 organization method of production for use with books and information articles
GB/T 5170.9-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Solar radiation testing equipments
GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products - Corrosive gas testing equipments
GB/T 5170.20-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Water testing equipments
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments
GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products - Solar radiation testing equipments
GB/T 5170.16-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products; Centrifugal machines for constant acceleration test

未注明发布机构

DIN 18104-1 E:2017-03 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
DIN EN ISO 377:1997 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing
DIN 18104-2 E:2001-09 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
DIN 51460-3 E:2014-09 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
GJB 2489-1995 Aviation airborne equipment resume and product certificate preparation requirements
DIN 18104-1 E:2012-05 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
AS 3990:1993(R2016) Mechanical equipment - Steelwork
JIS G 0416:2023 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
AS 62052.31:2017/Amdt 1:2021 Electricity metering equipment (AC) — General requirements, tests and test conditions, Part 31: Product safety requirements and tests
DIN 18104-2 E:2012-05 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
DIN EN 12629-8 E:1997-05 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
DIN 18104-2 E:2020-01 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods

Professional Standard - Construction Industry

JG/T 5093-1997 Construction machinery and equipment - Classification and type

Guangdong Provincial Standard of the People's Republic of China

DB44/T 219-2005 Agricultural produces drying equipments Testing specification

Professional Standard - Traffic

JT/T 218-1996 The model designation of motor vehicle service equipment and tools

Professional Standard - Aviation

HB 6121-1999 logbook and Product Certificate of Airborne Equipment for Foreign Trade
HB 6569-1992 Airborne equipment resume and product certificate
HB/Z 227.12-1992 Airborne Equipment Manufacturing Process Work Guidelines Product Process Appraisal
HB 6121-2011 Logbook and product certificate of airborne equipment for foreign trade
HB/Z 227.3-1992 Work Guidance on Airborne Equipment Manufacturing Process - Process Review of Product Design

Professional Standard - Machinery

JB/T 53142-1999 Pure nitrogen equipment product quality grading
JB/T 53149-1999 Argon extraction equipment product quality classification
JB/T 5824.4-1991 Classification and code of special equipment for wire and cable Part 4: Test equipment
JB/T 5824.2-1991 Classification and codes of special equipment for wire and cable Part 2: Main engine, unit, production line
JB/T 5824.2-2008 Equipments for Electric Wires and Cables - Division and Code of Product Classification - Part 2:Main Machine, Set, Production Line
JB/T 6471-1992 Model Designation Method for Electronic Control Unit of Cranes
JB/T 5824.4-2008 Equipments for electric wires and cables—Diveision and code of product classification—Part 4:Testing machine
JB/T 5662-1992 Classification of Environmental Protection Apparatus

未注明发布机构

DIN 18104-2 E:2001-09 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
AS 62052.31:2017/Amdt 1:2021 Electricity metering equipment (AC) — General requirements, tests and test conditions, Part 31: Product safety requirements and tests
DIN 18104-1 E:2017-03 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
DIN 18104-2 E:2020-01 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
AS 3990:1993(R2016) Mechanical equipment - Steelwork
DIN 18104-1 E:2012-05 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
DIN 18104-2 E:2012-05 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
GJB 2489-1995 Aviation airborne equipment resume and product certificate preparation requirements
DIN 51460-3 E:2014-09 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN EN ISO 377:1997 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing
DIN EN 12629-8 E:1997-05 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
JIS G 0416:2023 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing

Shanghai Provincial Standard of the People's Republic of China

DB31/T 987-2023 Technical specifications for the establishment of grassroots agricultural product testing institutions
DB31/T 184-2012 Regulations on Product Identification of Microcomputers and Peripheral Equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments

Beijing Provincial Standard of the People's Republic of China

DB11/T 1012-2019 Basic technical specifications for software product filing and testing

Professional Standard - Ocean

HY/T 207-2016 Standard system for product and test of marine instrument and equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 14623-2-2002 Sterilization of health care products-chemical indicators-Part 2：Test equipment and methods
CNS 14623.2-2002 Sterilization of health care products-chemical indicators-Part 2：Test equipment and methods

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40863-2021 Assessment technical specification for eco-design product—Motor products
GB/T 40774-2021 Technical specification for eco-design product assessment—Office equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 8298-2015 Product evaluation requirements for centralized procurement of computers and network equipment

Professional Standard - Energy

NB/T 47016-2011 Mechanical Property Tests of Product Welded Test Coupons for Pressure Equipments
NB/T 47016-2023 Mechanical property tests of product welded test coupons for pressure equipments

Professional Standard - Commodity Inspection

SN/T 1667.1-2005 Methods for the test of import and export mechanical and electrical commodity - Part 1: Measurement for the power consumption of audio video and related equipment

Professional Standard - Electron

SJ 20361-1993 Performance measurements for Tacan airbone equipment
SJ/Z 9148-1987 Acoustical measuring equipment for aircraft noise certification

Professional Standard - Railway

TB/T 2766-1996 Test rules for test equipment of locomotive electronic equipment

Professional Standard - Certification and Accreditation

RB/T 227-2023 Domestic testing equipment verification and evaluation guide Hydrogen fuel cell stack test equipment

工业和信息化部

JB/T 14140-2021 Food machinery一Sugar melting equipment
JB/T 14141-2021 Food machinery一Dispensing&mining equipment

Professional Standard - Medicine

YY/T 0083-1992 Product nameplate for medical instruments and equipment
YY 0083-1992 Product nameplate for medical equipment

HU-MSZT

MSZ 6415-1968 Mechanical production products. Lathe equipment
MSZ 6401-1963 Machinery production products sports equipment
MNOSZ 6476-1953 Mechanical transportation equipment product panel
MSZ 10559-1.lap-1960 Transportation Equipment. Technical product testing
MSZ 5803-1964 Agricultural machinery and harvesting equipment. Complete set of products
MNOSZ 12021-1954 Railway equipment measurement, production and inspection
MSZ 6026-1.lap-1958 Template temperature measurement equipment. Light product double tail equipment
MSZ 4822/1-1972 Large product equipment. Electrical equipment testing, general standards
MSZ 8607-1973 Mobile equipment, gas and water heating equipment products and testing
MSZ 10864-1969 Deposition machinery. Silver element equipment. technology products
MSZ 11408-1963 Natural gas information product equipment testing
MNOSZ 11652-1952 Comprehensive industrial machinery and product equipment. Various types of work equipment
MSZ 11029/3-1981 electronic product. Electronic equipment testing process. Stress testing of electronic instruments
MNOSZ 10435-1952 Chemical industry machinery and equipment. glass products
MSZ 19243-1975 Transportation of raw materials for production equipment. Technical product testing
MSZ 11424/1-1987 Gas equipment. Large kitchen products. General products and testing
MSZ 2100/2-1972 Electrical and mechanical equipment testing
MSZ 4803/1.lap-1964 Test insulating varnish group alternatives
MSZ 169/1-1977 Electrically driven fixed equipment product safety technology products and testing
MSZ KGST 591-1977 Start the device. Technical products and testing
MNOSZ 11388-1953 Machinery industry production equipment. port equipment
MSZ 18700/1-1979 Mechanical transportation equipment light bulbs. General technical standard products and testing
MSZ 6257-1957 Electric cutting machinery and equipment. Steel shaping technology products
MNOSZ 16606-1954 The main contents of aircraft technical product marks. air equipment
MI 18935-1987 Laboratory testing technology preparation equipment. General technology products
MSZ 11423/3-1986 Gas equipment products. infrastructure
MSZ 17132-1987 DC detection and measurement equipment. Technical products and testing
MSZ 18722-1966 Bicycle equipment dimensions, technical products and testing
MSZ 10570-1980 Trauma bone connection equipment. General products and testing
MNOSZ 5150-1953 Excavation equipment. Petroleum product excavation and transportation equipment
MSZ 6701/12-1983 Naming of raw material activities and equipment. Main equipment products
MSZ 6072/9-1984 Large metal cutting machinery. Safety Technology Products Electric Power Large Machinery Equipment
MSZ 10402-1967 Comprehensive industry. Chemical industry products. Measuring series equipment
MSZ KGST 1596-1979 Small welding equipment quality products
MSZ 6072/6-1984 Large metal cutting machinery. Safety Technology Products Water Color Equipment
MSZ 13263-1983 Store products, storage and preservation systems. Design products general technical equipment

Underwriters Laboratories (UL)

UL MECHANICAL EQUIPMENT-2011 Mechanical Equipment and Associated Products
UL MECHANICAL EQUIPMENT-2003 Mechanical Equipment and Associated Products Directory
UL MECHANICAL EQUIPMENT-2001 Mechanical Equipment and Associated Products Directory

British Standards Institution (BSI)

BS EN ISO 377:2017 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
BS EN ISO 377:2013 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
BS EN 12629-8:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
BS EN 12629-8:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
BS EN 12629-8+A1:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
BS EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
BS EN ISO 463:2006(2015) Geometrical Product Specifications (GPS) — Dimensionalmeasuring equipment — Design and metrological characteristics of mechanical dial gauges
BS EN 12629-2:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Block making machines
BS EN 12629-2:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Block making machines
BS EN 62052-31:2016 Electricity metering equipment (AC). General requirements, tests and test conditions. Product safety requirements and tests
BS EN 16811-1:2016 Winter service equipment and products. De-icing agents - Sodium chloride. Requirements and test methods
BS EN 12629-2+A1:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines
BS EN 13374:2004 Temporary edge protection systems - Product specification, test methods
BS EN 13398:2003 Methods of test for petroleum and its products - BS 2000-516:Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
BS ISO 2678:1985 Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
BS EN 13399:2003 Methods of test for petroleum and its products - BS 2000-517:Bitumen and bituminous binders - Determination of storage stability of modified bitumen
BS EN 13375:2004 Flexible sheets for waterproofing-Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles-Specimen preparation
BS IEC 62715-6-1:2018 Flexible display devices. Mechanical test methods. Deformation tests
BS EN ISO 9493:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Dial test indicators (lever type) — Design and metrological characteristics
BS EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines
BS EN ISO 14253-2:2011(2013) Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment Part 2 : Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS EN 12629-6:2004 Machines for the manufacture of constructional products from concrete and calcium-silicate-Safety-Part 6:Stationary and mobile equipment for the manufacture of precast reinforced products
BS EN 60255-27:2014 Measuring relays and protection equipment. Product safety requirements
BS EN 60255-27:2006 Measuring relays and protection equipment. Product safety requirements
BS EN 12811-4:2013 Temporary works equipment. Protection fans for scaffolds. Performance requirements and product design
BS EN ISO 463:2006 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
BS EN ISO 463:2008 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
BS EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations.Insitu thermal insulation formed from expanded perlite (EP) products. Part 2: Specification for the installed products
BS EN 12629-6:2005 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Stationary and mobile equipment for the manufacture of precast reinforced products
21/30394505 DC BS EN 62052-31. Electricity metering equipment (AC). General requirements, tests and test conditions - Part 31. Product safety requirements and tests
BS EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
BS EN 12392:2016 Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS ISO 21143:2020 Technical product documentation. Requirements for digital mock-up virtual assembly test for mechanical products

CL-INN

INDITECNOR 20-51 Petroleum and similar products: distillation testing (equipment)

Aeronautical Radio Inc.

ARINC 701-1 ITEM 9.0 BITE
ARINC 743A-4 ITEM 7.0 BITE
ARINC 612-1986 BITE Glossary
ARINC 612 BOOK-1986 BITE Glossary
ARINC 604-1 ITEM 3.0 Bite System Concepts
ARINC 612 ITEM 5.0-1986 Bite Display Preparation Guidelines
ARINC 602A-2 ITEM 12.0 Maintenance Use of Bite
ARINC 604-1-1988 Guidance for Design and Use of Built-In Test Equipment, 1985 (Includes Supplement 1)

PL-PKN

PN C45050-1986 Organie products Methods of tests
PN E04603-02-1992 Electrical and electronic products Environmental testing Test Cb: Damp heat, steady state, primarily for e?uipment
PN R36602-1992 Milking machine instsllations. Vocabulary
PN BN 6110-04-1964 Paint products. Equipment for testing the fire resistance of coatings
PN M55679-1958 Machine tools -- Grinding machines for tools -- Testing of accuracy
PN A75101-17-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of organie impurities content
PN A75101-16-1990 Fruit and vegetable produtts Preparation of samples and testing methods Determination of fruits or vegetables with defects
PN C60008-1974 Sampling equipment for bulk products
PN T06255-05-1988 Electronic e?Uipment for homeuse Radio receiver e?uipment Reliabilety testing in produce
PN C04281-1987 Products Chemical Organie Methods test Determination of iodine value
PN E04619-1987 Electrical and electronic products Basic erwironmental testing procedures Part 2: Tests. Test U: Robustness of terminations and integral mounting devices [Translation of Publication IEC 68-2-21 (1983)]

German Institute for Standardization

DIN EN ISO 377:2017-09 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017); German version EN ISO 377:2017
DIN 51460-3:2016-12 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
DIN EN ISO 463:2006-06 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006
DIN 18104-1:2017-08 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
DIN 51460-3:2016 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); English version of DIN EN ISO 463:2006-06
DIN 18104-1:2000 Mechanical security devices - Part 1: Additional burglar resistant products for windows and doors; requirements and test methods
DIN EN ISO 9493:2011-03 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010
DIN 18104-2:2002 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors, requirements and test methods
DIN 18104-2:2013 Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors - Requirements and test methods
PAS 1040-3-2004 Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Part 3: List of machines and process equipment

Korean Agency for Technology and Standards (KATS)

KS D ISO 377-2013 Steel and steel products－Location and preparation of samples and test pieces for mechanical testing
KS A 1642-1995 Mechanical-shock fragility testing methods of products for packaging design
KS T 1332-2022 Mechanical-shock fragility testing methods of products for packaging design
KS P ISO 18472:2020 Sterilization of health care products — Biological and chemical indicators — Test equipment
KS T 1332-2012(2017) Mechanical-shock fragility testing methods of products for packaging design
KS D ISO 377-2002(2012) Steel and steel products－Location and preparation of samples and test pieces for mechanical testing
KS B ISO 463-2014(2019) Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
KS B ISO 463-2019 Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
KS M ISO 13787:2013 Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
KS M ISO 13787-2013(2018) Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
KS X ISO/IEC 24712-2023 Information technology－Office equipment－Colour test pages for measurement of office equipment consumable yield
KS T 1332-2012(2022) Mechanical-shock fragility testing methods of products for packaging design
KS B 6359-1983 Testing method for mechanical transport refrigeration units
KS B 6359-2008(2018) Testing method for mechanical transport refrigeration units
KS C 0903-2003 Vibration testing procedure for electric machines and equipment
KS B 6359-2023 Testing method for mechanical transport refrigeration units
KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring

CZ-CSN

CSN 34 5682-1974 Climatic test of electrical devices designed to be used in animal production conditions
CSN 35 4055 Cast.54-1988 Electromechanical components for electronic equipment; coding device test
CSN 72 7303 Z1-1995 Test methods for inorganic fibers of thermal insulation products
CSN 13 6313-1964 Caat iron product for sewerage. Cover plate for entry shafts for test load 40 t
CSN 03 8822-1988 Climatic and mechanical resistance tests of technical products. Dry heat test
CSN 72 7303 Z2-1996 Inorganic fiber insulation products. Test Methods
CSN 03 8821-1990 Climatic and mechanical resistance tests of technical produots. Cold test
CSN 34 1631-1970 Electronic Equipment of Production Machines.
CSN 72 2606-1978 Testing of brick products. Frostproof test
CSN 34 1630-1966 Electrical Equipment o? Production Machines
CSN 30 4003-1974 Test of electrical and lighting equipment for motor vehicles
CSN 72 7303-1987 Thermal insulation products from inorga- nic fibres. Methods of testing

Association Francaise de Normalisation

NF U51-161:1990 Agricultural drainage. Coating products. Testing in permeameter test method.
NF EN ISO 16000-11:2006 Indoor air - Part 11: determination of the emission of volatile organic compounds from construction products and equipment objects - Sampling, preservation of samples and preparation of samples for testing
NF ISO 1050:2014 Continuous handling equipment for bulk products - Screw conveyors
NF E58-680*NF EN 12629-8+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8 : machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
NF E58-680/IN1*NF EN 12629-8/IN1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8 : machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
NF U66-062:1986 Food production equipment. Meat chopper. Safety devices integrated.
NF C44-052-31*NF EN 62052-31:2017 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31 : product safety requirements and tests
NF E11-050*NF EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
NF A03-112:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.
NF EN IEC 60580:2020 Electromedical devices - Exposure-surface product radiation meters
NF P93-354:2011 Building site equipment - Bracket scaffolding - Product specification - Test method.
NF U65-050:1986 Food production equipment. Bread slicers. Safety devices integrated.
NF EN ISO 9902-6:2021 Equipment for the textile industry - Acoustic test code - Part 6: fabric production machines
NF EN 1641:2009 Art dentaire - Dispositifs médicaux pour l'art dentaire - Produits
NF U51-162:1990 Agricultural drainage. Coating products. Sand tank filtration test. Test method.
NF EN ISO 9493:2011 Geometrical Product Specification (GPS) - Dimensional measuring equipment: mechanical lever comparators - Design features and metrological characteristics
NF EN ISO 9902-4:2001 Equipment for the textile industry - Acoustic test code - Part 4: yarn processing machines and machines for producing ropes and articles of rope
NF EN 16602-70-53:2016 Product assurance of space projects - Compatibility testing of materials and equipment for sterilization processes
NF EN ISO 9902-3:2001 Equipment for the textile industry - Acoustic test code - Part 3: non-woven production machines
NF E58-620*NF EN 12629-2+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2 : block making machines
NF E88-003/IN1*NF EN 14681/IN1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
NF E88-003*NF EN 14681+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

AT-ON

ONORM L 5262-1985 Milking machines; testing; testing devices, testing aids and fest method
ONORM N 4001-1994 Testing of meat and meat products - Sampling of meat and meat products - Preparation of samples for analysis
ONORM M 9632-1998 Mechanical equipment on stages - Test procedures

American Society for Testing and Materials (ASTM)

ASTM E1108-86(2004) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM A1058-14 Standard Test Methods for Mechanical Testing of Steel Productsmdash;Metric
ASTM D3332-99 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

KR-KS

KS P ISO 18472-2020 Sterilization of health care products — Biological and chemical indicators — Test equipment

SCC

DANSK DS/EN ISO 377:2017 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
UNE-EN ISO 377:1998 STEEL AND STEEL PRODUCTS. LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING. (ISO 377:1997).
NS-EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
NS 10005:1988 Steel and steel products — Selection and preparation of samples and test pieces for mechanical tests
CAN/CGSB-201.1-2003 Minimum Product and Warranty Service Requirements for Microcomputer-based Equipment
DIN 51460-3 E:2014 Draft Document - Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DANSK DS/EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
DIN EN ISO 377 E:2017 Draft Document - Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO/FDIS 377:2017); German and English version FprEN ISO 377:2017
DIN 18104-1:2017 Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
DANSK DS/PAS 2600:2022 Cyber security in products (IoT)
BS EN ISO 377:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
DANSK DS/EN 62052-31:2016 Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 31: Product safety requirements and tests
VDI/VDE/DGQ 2618 BLATT 11.1:2014 Test equipment monitoring — Test instructions for mechanical dial gauges
VDI/VDE/DGQ/DKD 2618 BLATT 11.1:2021 Test equipment monitoring — Test instructions for mechanical dial gauges
BS DD ENV ISO 14253-2:2001 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments-Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DIN 18867-7 E:2020 Draft Document - Equipment for commercial kitchens - Mobile equipment - Part 7: Food conveyors - Requirements and testing
AENOR UNE-EN 16889:2017 Food hygiene. Production and dispensing of hot beverages prepared by hot beverage producing devices. Hygiene requirements, migration test.
DIN 18104-1 E:2017 Draft Document - Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods
ASA S12.61-2020 Declaration and Verification of Noise Emission Values of Machinery, Equipment, and Products
12/30243622 DC BS EN ISO 377. Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
AENOR UNE-EN 14214 V2+A1:2018 Liquid petroleum products. Fatty acid methyl esters (FAME) for diesel engines and heating equipment. Requirements and test methods.
AENOR UNE-EN 14214 V2+A2:2019 Liquid petroleum products. Fatty acid methyl esters (FAME) for diesel engines and heating equipment. Requirements and test methods.
BS EN 1265:1999 Noise test code for foundry machines and equipment
NS-EN 1265:1999 Noise test code for foundry machines and equipment
NS-EN ISO 377:1997 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
DANSK DS/EN ISO 14253-2/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
AENOR UNE-EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
NS-EN ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1...
NS-ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipments — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1...
UNE-ENV ISO 14253-2:2005 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS ...
08/30184166 DC BS ISO 8143. Thermal insulation products for building equipment and industrial installations. Calcium silicate products
NS-EN 12629-8:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
DANSK DS/EN ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
AASHTO T 244-2018 Standard Method of Test for Mechanical Testing of Steel Products (ASTM Designation: A370-17a)
AASHTO T 244-2006 Standard Method of Test for Mechanical Testing of Steel Products (ASTM Designation: A370-05)
NS-EN ISO 377:2013 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013, Corrected version 2015-06-01)
NS-EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
DANSK DS/ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verfication
DANSK DS/EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DANSK DS/ISO 8210:1996 Equipment for harvesting - Combine harvesters - Test procedure
NS-EN ISO 18099:2022 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022)
DIN EN ISO 14253-2 E:2009 Draft Document - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verifi...
NS-EN 15583-1:2009 Winter maintenance equipment — Snow ploughs — Part 1: Product description and requirements

IN-BIS

IS 9002 Pt.7-1983 Specification for environmental testing equipment for electronic and electrical products Part 7 Impact testing machines
IS 9002 Pt.9-1984 Specification for Environmental Test Equipment for Electronic and Electrical Products Part 9 Accelerated (Steady State) Testing Machines
IS 9981-1981 Agricultural Products Processing Equipment Glossary
IS 9002 Pt.1-1977 Specification for Environmental Testing Equipment for Electrical and Electronic Products Part Ⅰ Cold Test Chamber
IS 9002 Pt.13/Sec.3-1985 Specification for Environmental Test Equipment for Electrical and Electronic Products Part 13 Temperature Change Test Equipment Section 3: Two Baths

CU-NC

NC 24-71-1988 Inorganic Chemical Products Carbon Dioxide. Testing Methods
NC 24-58-1986 Inorganic Chemical Products Argón. Testing Methods

ECMA - European Association for Standardizing Information and Communication Systems

TR 62-1993 PRODUCT NOISE EMISSION OF COMPUTER AND BUSINESS EQUIPMENT

Japanese Industrial Standards Committee (JISC)

JIS G 0416 AMD 1:2008 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing (Amendment 1)
JIS B 7758:1995 Electrodynamic test equipment for generating vibration -- Methods of describing equipment characteristics
JIS Z 0119:1994 Mechanical-shock fragility testing methods of products for packaging design
JIS Z 0119:2002 Mechanical-shock fragility testing methods for packaging and products design

RU-GOST R

GOST R ISO 18472-2009 Sterilization of health care products. Biological and chemical indicators. Test equipment
GOST R 50911-1996 Agricultural mashinary. Maintenance-production equipment. General safety requirements
GOST R ISO 11140-2-2001 Sterilization of health care products. Chemical indicators. Part 2. Test equipment and methods
PNST 219-2017 Aviation equipment. Hydraulic systems. The order of handling of products containing hoses, and their installation in aircraft products

Canadian General Standards Board （CGSB)

CGSB 201.1-2003-CAN/CGSB-2003 Minimum Product and Warranty Service Requirements for Microcomputer-based Equipment

US-CFR-file

CFR 46-160.021-4-2014 Shipping. Part160:Lifesaving equipment. Section160.021–4:Approval and productiontests.
CFR 46-160.024-4-2014 Shipping. Part160:Lifesaving equipment. Section160.024–4:Approval and productiontests.
CFR 46-160.036-4-2014 Shipping. Part160:Lifesaving equipment. Section160.036–4:Approval and productiontests.

AENOR

UNE-EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
UNE-EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)

International Electrotechnical Commission (IEC)

IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests

ES-UNE

UNE-EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
UNE-EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests (Endorsed by AENOR in September of 2016.)
UNE-EN 15583-1:2009 Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements (Endorsed by AENOR in July of 2009.)

Lithuanian Standards Office

LST EN ISO 377:2000 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
LST EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)

GSO

OS GSO ISO 463:2007 Geometrical Product Specification (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
GSO ISO 2818:2015 Plastics -- Preparation of test specimens by machining
GSO ISO 463:2007 Geometrical Product Specification (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
GSO ISO 6690:2015 Milking machine installations -- Mechanical tests
OS GSO EN 1265:2011 Noise test code for foundry machines and equipment
OS GSO ISO 9493:2016 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics
BH GSO ISO 14253-2:2022 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
GSO ISO 14253-2:2021 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BH GSO ISO 9493:2017 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics
GSO ISO 9493:2016 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics

European Committee for Electrotechnical Standardization（CENELEC）

EN 62052-31:2016 Electricity metering equipment (AC) - General requirements@ tests and test conditions - Part 31: Product safety requirements and tests

Indonesia Standards

SNI 05-6042-1999 Testing method of star feeder iodized salt machinery performance
SNI 09-1412-1989 Equipment for measuring and defining the seating accomodations of motor vehicles

ZA-SANS

SANS 5983:2000 Preparation of test specimens for moisture content determination in timber and timber products

YU-JUS

JUS N.A3.750-1989 Efectrotechnofogy. Item designation in etectrotechno(ogy
JUS B.D8.099-1997 Sanitary appliances - Quality inspection ofproducts in production

Society of Automotive Engineers (SAE)

SAE ARP6068-2017 Gas Turbine Engine Test Facility Vibration Measurement
SAE J575-1980 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575C-1966 TEST FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575D-1967 TEST FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575G-1977 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575A-1964 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575-1988 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE ARP6068-2010 Gas Turbine Engine Test Facility Vibration Measurement

RO-ASRO

STAS 10363-1975 LIQUID PETROLEUM PRODUCTS FOR ANTICORROSIVE PROTECTION OF MOTOR VEHICLES, MACHINES AND EQUIPMENTS
STAS ISO 3100-2:1992 Meat and meat products. Sampling and preparation of test samples. Part 2: Preparation of test samples for microbiological examination
STAS SR 13384-1997 Agricultural machinery - Equipment for transplanting -Methods of testing

CO-ICONTEC

ICONTEC 1900-1983 Machinery products, cylindrical vertical drilling rigs, necessary tests

European Committee for Standardization (CEN)

EN 13496:2002 Thermal insulation products for building applications Determination of the mechanical properties of glass fibre meshes
EN 13496:2013 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
EN 12629-8:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) (Incorporates Amendment A1: 2010)
EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
EN 15583-1:2009 Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements

IEC - International Electrotechnical Commission

IEC 62052-31 INT 1:2019 ELECTRICITY METERING EQUIPMENT (AC) – GENERAL REQUIREMENTS@ TESTS AND TEST CONDITIONS – Part 31: Product safety requirements and tests (Edition 1.0)

Danish Standards Foundation

DS/EN ISO 463/AC:2008 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463:2006 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463/AC:2009 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics

American National Standards Institute （ANSI)

ANSI/ASHRAE 204-2020 ANSI/ASHRAE Standard 204-2020 Method of Test for Rating Micro Combined Heat and Power Devices

Standard Association of Australia （SAA）

AS/NZS 2341.21:2015 Test Methods for Asphalt and Related Road Construction Products Sample Preparation
AS/NZS 2341.21:1995 Methods of testing bitumen and related roadmaking products - Sample preparation
AS 3990:1993 Mechanical equipment - Steelwork

AASHTO - American Association of State Highway and Transportation Officials

T 244-1992 Standard Method of Test for Mechanical Testing of Steel Products (ASTM A370-92)
T 244-2005 Standard Method of Test for Mechanical Testing of Steel Products (ASTM Designation A 370-03a)
T 244-2003 Standard Method of Test for Mechanical Testing of Steel Products (ASTM Designation A 370-02)

U.S. Air Force

AIR FORCE A-A-59321 A VALID NOTICE 1-2012 Test Set, Transponder Set

SAE - SAE International

SAE J575-1983 Tests for Motor Vehicle Lighting Devices and Components
SAE J575E-1970 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575-2004 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS
SAE J575-1978 COLOR SPECIFICATION FOR ELECTRIC SIGNAL LIGHTING DEVICES
SAE J575-2006 Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less Than 2032 mm in Overall Width
SAE J575F-1975 TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

GOSTR

GOST 34496-2018 Milking machines and equipment for cows. Test methods

International Organization for Standardization (ISO)

ISO 377:2017/AWI Amd 1 Steel and steel products-Location and preparation of samples and test pieces for mechanical testing-Amendment 1
ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14253-2:2011/cor 1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica
ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges

U.S. Military Regulations and Norms

ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2622 Blatt 12-2004 Calibration of measurement equipment for electrical quantities - Test receiver

CN-STDBOOK

图书 3-9556 Town gas and gas product standard compilation product equipment volume

DIN

DIN EN 12629-8:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

IL-SII

S.I.641-1967 TESTING OF MILK AND ITS PRODUCTS: TEST OF STERILITY OF LIQUID PRODUCTS

Consumer Electronics Association （U.S.)

CEA-9-2002 Standard Method of Measurement for Phonograph Cartridges Used in Analog Disc Playback Equipment

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0418-2-31-2017 Electricity metering equipment (AC) - General requirements@ tests and test conditions - Part 31: Product safety requirements and tests (IEC 62052-31:2015); German version EN 62052-31:2016

Others: Internal Combustion Engine Test Equipment,Grinder Test Equipment,Product testing equipment machine,Product size testing equipment