GB/T 5783-2000 in English
SUPERSEDEDHexagon Head Bolts-Full Thread
- Issued on:2000-09-02
- Implemented on:2001-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$117.00
This standard specifies hexagon head bolts with thread specifications of M1.6~M64, full thread, performance rate of 5.6, 8.8, 9.8, 10.9, A2-70, A4-70, A2-50, A4-50, CU2, CU3 and AL4 and production Grades of A and B. Grade A is used for bolts with d= 1.6~24 mm and l≤10d or l≤150mm (on the basis of the smaller value); Grade B is used for bolts with d>24 mm or 1>10d or l>150 mm (on the basis of the smaller value).
Note: This kind of products can only be made into full thread and may be as long as 200mm when using as nominal length for the merchandise length specification, other features are same as those specified in GB/T 5782.
If any other technical requirements are required, it shall be selected from the current standards (such as GB/T 196, GB/T 3106, GB/T 3098.1, GB/T 3098.6 and GB/T 3103.1).
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 10433-2024 in English
Fasteners—Studs and ceramic ferrules for arc stud welding
2024-09-29 -
GB/T 2673.1-2025 in English
Fasteners—Hexalobular socket screws—Part 1: Countersunk flat head screws with reduced loadability
2025-10-31 -
GB/T 35-2013 in English
Square head bolts with small head
2013-06-09 -
GB/T 65-2016 in English
Slotted cheese head screws
2016-02-24 -
GB/T 43151-2023 in English
High-strength bolt assemblies for steel structures of weathering steel
2023-09-07 -
GB/T 29.1-2013 in English
Hexagon bolts with slot on head
2013-06-09 -
GB/T 22795-2008 in English
Expansion anchors for use in concrete - Type and dimension
2008-12-31 -
GB/T 24425.1-2009 in English
General type wire thread inserts
2009-10-15 -
GB/T 41157.1-2022 in English
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel
2022-03-09 -
GB/T 12-2013 in English
Cup head square neck bolts
2013-06-09
