GB/T 8144-2008 in English
VALIDDetermination of exchange capacity of cation exchange resin
- Issued on:2008-06-30
- Implemented on:2009-02-01
- File Format:PDF
- Delivery:Within 1 day
$55.00
本标准规定了苯乙烯系强酸性氢型和钠性阳离子交换树脂、丙烯酸系弱酸性阳离子交换树脂的交换容量测定方法。
本标准适用于苯乙烯系强酸性氢型和钠性阳离子交换树脂、丙烯酸系弱酸性阳离子交换树脂交换容量的测定。
Scope
This standard specifies the exchange capacity determination methods for styrene-based strongly acidic hydrogen-type and sodium-type cation exchange resins and acrylic acid-based weakly acidic cation exchange resins. This standard applies to the determination of the exchange capacity of styrene-based strongly acidic hydrogen-type and sodium-based cation exchange resins and acrylic acid-based weakly acidic cation exchange resins.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 44559.1-2024 in English
Plastics—Determination of puncture impact behaviour of rigid plastics—Part 1: Non-instrumented impact testing
2024-09-29 -

GB/T 1404.1-2008 in English
Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications
2008-08-04 -

GB/T 47071-2026 in English
Plastics—Production quality control—Statistical method for using single measurements
2026-01-28 -

GB/T 45127-2025 in English
Plastics—Evaluation of the action of microorganisms
2025-01-24 -

GB/T 32106-2015 in English
Plastics―Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system―Method by measurement of biogas production
2015-10-09 -

GB/T 46838-2025 in English
Plastics—Determination of fracture toughness(GIC and KIC) at moderately high loading rates(1m/s)
2025-12-02 -

GB/T 36769-2018 in English
Determination of percent regeneration of cation exchange resins
2018-09-17 -

GB/T 1844.1-2022 in English
Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
2022-10-12 -

GB/T 29649-2013 in English
Determining the biobased content of biobased materials—Liquid scintillation counters(LSC)method
2013-09-06 -

GB/T 5470-2008 in English
Plastics - Determination of the brittleness temperature by impact
2008-08-14