GB/T 9575-2013 in English
VALIDRubber and plastics hoses—Hose sizes, minimum and maximum inside diameters,and tolerances on cut-to-length hoses
- Issued on:2013-07-19
- Implemented on:2013-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$88.00
《GB/T 9575-2013橡胶和塑料软管 软管规格和最大最小内径及切割长度公差》由TC35（全国橡胶与橡胶制品标准化技术委员会）归口，TC35SC1（全国橡胶与橡胶制品标准化技术委员会软管分会）执行，主管部门为中国石油和化学工业联合会。
Scope
This standard specifies the specifications of rubber and plastic hoses, the maximum and minimum allowable inner diameters of each specification, and the cut length tolerances of industrial and motor vehicle hoses. According to the manufacturing process, the hose is divided into four types. Except for the hose specifications and inner diameter ranges that are specially specified, this standard is used together with the relevant hose product standards.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 5563-2025 in English
Rubber and plastics hoses and hose assemblies—Hydrostatic testing
2025-08-29 -
GB 7542-2003 in English
brake hoses for railway locomotive and car
2003-06-01 -
GB/T 33380-2016 in English
Rubber hoses with large diameter―Tensile test
2016-12-30 -
GB/T 18949-2003 in English
Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions
2003-01-10 -
GB/T 37220-2018 in English
Rubber hose assemblies with large diameter—Accelerated fatigue test
2018-12-28 -
GB/T 12721-2007 in English
Rubber hoses—Determination of abrasion resistance of the outer cover
1991-02-01 -
GB/T 14904-2011 in English
Rubber and plastics hoses and hose assemblies with wire reinforcements—Hydraulic impulse test with flexing
2011-12-30
