GB/T 9722-2006 in English

《GB/T 9722-2006化学试剂 气相色谱法通则》由TC63（全国化学标准化技术委员会）归口，TC63SC3（全国化学标准化技术委员会化学试剂分会）执行，主管部门为中国石油和化学工业联合会。

Chemical reagent -General rules for the gas chromatography

1 Scope

This standard specifies the requirements for apparatus and analysis methods for gas chromatography for chemical reagents. The detectors to be used include a thermal conductivity detector and a flame ionization detector, and the chromatographic columns are packed columns and capillary columns.

This standard is applicable to the determination of main components and impurities of organic chemical reagents containing volatile components.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.

GB/T 4946 Terms of gas chromatography
JJG 700-1999 Gas chromatograph
ZHIJIJIANJUGUOFA[2000] No.250 Supervision regulation on safety of gas cylinder


3 Terms and definitions

For the purposes of this standard, the terms and definitions given in GB/T 4946 as well as the following apply.

3.1
asymmetric factor (f)
parameter describing the degree of asymmetry of chromatographic peaks, as illustrated in Annex A

3.2
height of an effective plate (Heff)
length of a unit effective plate, as illustrated in Annex A

 
4 Principle

After being vaporized, the sample and its measured components enter the chromatographic column simultaneously with the carrier gas. As the components to be determined have different physicochemical properties such as adsorption or dissolution, desorption or resolution of between gas-

Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents and materials
6 Apparatus
7 Selection of test conditions
8 Operating method
9 Quantitative methods
10 Method error
11 Environmental requirements and safety matters
Annex A (Normative) Diagrams and calculation formulae for related terms