QX/T 406-2017 in English
VALIDOccupational requirement for inspectin technicans of lightning protection system
- Issued on:2017-12-29
- Implemented on:2018-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$194.00
Introduction
Standard Background and Positioning
As a key component of the lightning protection regulatory standards system, this standard responds to the State Council's "streamlining administration, delegating power, and improving regulation and services" reform requirements. By standardizing the professional competency evaluation of inspectors, it strengthens both ongoing and post-event oversight. The primary drafting units include meteorological departments in high-incidence lightning regions such as Shanghai and Guangdong, demonstrating significant regional representativeness.
Analysis of Core Requirements
| Dimensions | Basic Requirements | Knowledge Requirements | Skill Requirements |
|---|---|---|---|
| Ability Level | Basic Quality | Master/Be Familiar with/Understand the Three-Level System | Proficient/Able to/Master the Three-Level System |
| Typical Requirements | No physical defects such as acrophobia | Must master 8 types of testing standards | Proficient in using 12 types of testing instruments |
| Assessment Key Points | Professional Code Compliance | Explosion Site Specific Knowledge | Ground Resistance Test Verification |
Knowledge System Architecture
Level 3 Knowledge Mastery Requirements: Based on eight core standards, including GB/T32938, this knowledge system comprises three modules: laws and regulations, production safety, and testing theory. Explosion Hazard Testing requires the highest level of mastery, encompassing six specific requirements, including zoning determination and protective facilities.
Typical Application Scenario: During oil storage and transportation base inspections, inspectors must apply both GB/T32937 (Explosion Site Inspection) and GB/T21431 (Building Inspection) standards to cross-verify the effectiveness of lightning protection devices.
Instrument Operation Specifications
The standard clearly requires proficiency in the operation of key equipment such as ground resistance testers and lightning protection component testers, with particular emphasis on:
- Periodic Verification: Establish a regular verification mechanism for ground resistance testers
- Troubleshooting: Require basic repair capabilities such as cable breakage
- Safe Operation: Require instrument securing specifications when working at height
Implementation Recommendations
1. Personnel Training: It is recommended to conduct tiered training using a "theoretical module + scenario-based training" model, with a focus on strengthening explosion site detection capabilities
2. Assessment Mechanism: Establish a dual assessment system for knowledge mastery and skill proficiency, and it is recommended to conduct blind instrument operation tests every quarter
3. Technical Updates: Pay attention to the revision of GB/T33676 and other communication lightning protection standards, and adjust the detection methods in a timely manner
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
QX/T 705-2023 in English
Technical Specifications for Division of Lightning-prone Areas
2023-12-30 -
QX/T 214-2025 in English
Greenhouse Gas Sampling Methods for Stainless Steel Tanks
2025-05-19 -
QX/T 317-2023 in English
General rules for quality assessment of lightning protection device testing
2023-09-05 -
QX/T 63-2007 in English
Specifications for surface meteorological observation. Part19: Monthly meteorological radiation data
2007-06-22 -
QX/T 712-2024 in English
Climate Change Impact Assessment Food Crop Yield Vulnerability
2024-06-20 -
QX 30-2005 in English
Technical specifications for lightning protection in automatic weather stations
2005-02-04 -
QX/T 257-2015 in English
Calibration method of hair hygrometer(hygrograph)
2015-01-26
