YS/T 229.3-2013 in English
VALIDMethods for Chemical Analysis of High Pure Lead - Part 3: Determination of Antimony Content - Atomic Fluorescence Spectrometry
- Issued on:2013-10-17
- Implemented on:2014-03-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$117.00
Scope
This part of YS/T 229 specifies the method for determining the amount of antimony in high-purity lead. This section applies to the determination of antimony content in high-purity lead. Determination range of antimony content: 0.05 × 10%~1.0 × 10% (mass fraction).

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

YS/T 461.1-2013 in English
Methods for Chemical Analysis of Lead and Zinc Bulk Concentrates - Part 1: The Determination of Lead and Zinc Contents - The Na2EDTA Titrimetric Method after Precipitation Separation
2013-10-17 -

YS/T 1415.2-2024 in English
Methods for chemical analysis of zinc hydrometallurgy leaching solution— Part 2: Determination of impurity elements— Inductively coupled plasma atomic emission spectrometry
2024-10-24 -

YS/T 1679-2023 in English
Methods for analysis of tin and tin alloys- Photoelectric direct reading spectroscopy
2023-12-20 -

YS/T 1348.7-2021 in English
Methods for chemical analysis of lead smelting silver slag Part 7: Determination of arsenic content by inductively coupled plasma atomic emission spectrometry
2021-12-02 -

YS/T 248.11-2025 in English
Methods for chemical analysis of crude lead—Part 11:Determination of copper, zinc, arsenic, antimony, bismuth and tin contents —Inductively coupled plasma atomic emission spectrometry
2025-04-10