boiling point 50

boiling point 50, Total:268 items.

The international standard classification for "boiling point 50" includes: Waxes, bituminous materials and other petroleum products , Chemical reagents .

The Chinese standard classification for "boiling point 50" includes: Solvent oil , Marking, packaging, transport and storage in general , Chemical reagent in general , Petroleum products in general .

Taiwan Provincial Standard of the People's Republic of China

CNS 2328-1964 Tar Acid, High Boiling Point
CNS 5585-1980 Method of Test for Boiling Point of Engine Coolants

未注明发布机构

FORD FLTM EU-AM 004-01-2001 BOILING POINT OF BRAKE FLUID
FORD FLTM AM 004-01-2001 BOILING POINT OF BRAKE FLUID

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22226-2008 Standard test method for boiling point for engine coolants
GB/T 616-1988 Chemical reagent-General method for the determination of boiling point
GB/T 29497-2013 High-flash aromatic naphthas
GB 616-1988 General method for determination of boiling point of chemical reagents
GB/T 29497-2017 High-flash aromatic hydrocarbon solvents
GB/T 616-2006 Chemical reagent - General method for the determination of boiling point

Group Standards of the People's Republic of China

T/FSI 050-2020 Methylchlorosilane high boiling point mixture
T/QGCML 2122-2023 Special fire extinguishing agent for low boiling point flammable liquids

Professional Standard - Petrochemical Industry

SH/T 0089-1991 Ebullioscopy for engine refrigerant

Chongqing Provincial Standard of the People's Republic of China

DB50/T 867.50-2023 Technical Specifications for Production Safety Part 50: Dinner Service Enterprises

Professional Standard - Energy

NB/SH/T 0430-2019 Standard test method for determination of equilibrium reflux boiling point of motor vehicle brake fluid

International Organization for Standardization (ISO)

ISO/R 50:1957
ISO 7001:2007/DAmd 50 Graphical symbols — Public information symbols — Amendment 50: Symbol PI PF 066: Recycling
ISO 128-50:2001 Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections

American Association of State Highway and Transportation Officials

AASHTO T 50-2025

Association Francaise de Normalisation

NF A50-451:1986
NF C93-560-50*NF EN 61169-50:2015 Radio-frequency connectors - Part 50 : sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Caracteristic impedance 50 Ohm (type QMA)
NF C57-700-50*NF EN IEC 61400-50:2022 Wind energy generation systems - Part 50 : wind measurement - Overview
XP P98-818-50*XP CEN/TS 12697-50:2020 Bituminous mixtures - Test methods - Part 50 : resistance to scuffing
NF EN IEC 61400-50:2022 Wind power generation systems - Part 50: Wind measurement - Overview
NF C93-841-2-50*NF EN 60793-2-50:2017 Optical fibres - Part 2-50 : product specifications - Sectional specification for class B single-mode fibres
NF C93-840-1-50*NF EN 60793-1-50:2018 Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state) tests
NF EN 16603-50-52:2017 Space engineering - SpaceWire - Part 50-52: remote memory access protocol
NF C93-841-2-50*NF EN IEC 60793-2-50:2019 Optical fibres - Part 2-50 : product specifications - Sectional specification for class B single-mode fibres
XP CEN/TS 12697-50:2020 Mélanges bitumineux - Méthodes d'essai - Partie 50 : résistance aux arrachements superficiels
NF C93-841-2-50*NF EN IEC 60793-2-50:2025 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
XP E66-525-50*XP ISO/TS 13399-50:2017 Cutting tool data representation and exchange - Part 50 : reference dictionary for reference systems and common concepts

German Institute for Standardization

DIN EN 16603-50-12:2019 Space engineering - SpaceWire - Links, nodes, routers and networks; English version FprEN 16603-50-12:2019
DIN EN 16603-50-12:2020 Space engineering - SpaceWire - Links, nodes, routers and networks; English version EN 16603-50-12:2020
DIN EN 16603-50-12 E:2019 Draft Document - Space engineering - SpaceWire - Links, nodes, routers and networks; English version FprEN 16603-50-12:2019
DIN EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests (IEC 60793-1-50:2014); German version EN 60793-1-50:2015
DIN EN IEC 61400-50:2023 Wind energy generation systems - Part 50: Wind measurement - Overview (IEC 61400-50:2022); German version EN IEC 61400-50:2022
DIN EN 60793-1-50:2002 Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state) (IEC 60793-1-50:2001); German version EN 60793-1-50:2002
DIN EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) (IEC 61169-50:2014); German version EN 61169-50:201
DIN EN 60793-2-50:2013 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2012); German version EN 60793-2-50:2013
DIN EN 60793-2-50:2016 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2015); German version EN 60793-2-50:2016
DIN EN 61811-50:2002 Electromechanical all-or-nothing relays - Part 50: Sectional specification; Electromechanical all-or-nothing telecom relays of assessed quality (IEC 61811-50:2002); German version EN 61811-50:2002
DIN EN 60317-50:2013 Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:2012); German version EN 60317-50:2012
DIN EN 60601-2-50:2010 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009); German version EN 60601-2-50:2009
DIN EN IEC 61400-50:2023-07 Wind energy generation systems - Part 50: Wind measurement - Overview (IEC 61400-50:2022); German version EN IEC 61400-50:2022
DIN EN IEC 60793-2-50:2020 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2018); German version EN IEC 60793-2-50:2019
DIN EN 16603-50-12 E:2019-12 Draft Document - Space engineering - SpaceWire - Links, nodes, routers and networks; English version FprEN 16603-50-12:2019
DIN EN 16603-50:2022 Space engineering - Communications; English version EN 16603-50:2022
DIN EN 60793-1-50:2015-08 Optical fibers - Part 1-50: Measurement methods - Damp heat (steady state) tests (IEC 60793-1-50:2014); German version EN 60793-1-50:2015
DIN EN 16603-50:2014 Space engineering - Communications; English version EN 16603-50:2014
DIN EN 60793-1-50:2002-10 Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state) (IEC 60793-1-50:2001); German version EN 60793-1-50:2002
DIN ISO 128-50:2002 Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections (ISO 128-50:2001)
DIN EN 60601-2-50:2017 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009 + Cor. 1:2010 + A1:2016); German version EN 60601-2-50:2009 + A11:2011 + A1:2016
DIN EN 60793-2-50:2013-11 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2012); German version EN 60793-2-50:2013
DIN EN 60793-2-50:2016-10 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2015); German version EN 60793-2-50:2016
DIN EN 60793-2-50:2009-06 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2008); German version EN 60793-2-50:2008
DIN EN 61300-3-50:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (IEC 61300-3-50:2013); German version EN 61300-3-50:2013
DIN EN IEC 61400-50-2:2024 Wind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology (IEC 61400-50-2:2022); German version EN IEC 61400-50-2:2022
DIN 13-50:2017 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN EN 60317-50:2000 Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000
DIN EN 61169-50:2015-11 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4.11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) (IEC 61169-50:2014); German version EN 61169-50:...
DIN EN 60601-2-50:2002 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000-07 + Corrigendum March 2001); German version EN 60601-2-50:2002
DIN 13-50:1999 ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN EN IEC 60793-2-50:2020-03 Optical fibers - Part 2-50: Product specifications - Sectional specification for class B single-mode fibers (IEC 60793-2-50:2018); German version EN IEC 60793-2-50:2019
DIN EN 81-50:2014 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components; German version EN 81-50:2014
DIN EN 61811-50:2002-11 Electromechanical all-or-nothing relays - Part 50: Sectional specification; Electromechanical all-or-nothing telecom relays of assessed quality (IEC 61811-50:2002); German version EN 61811-50:2002
DIN EN 60317-50:2000-09 Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000
DIN EN IEC 61400-50-2:2024-03 Wind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology (IEC 61400-50-2:2022); German version EN IEC 61400-50-2:2022
DIN EN 81-50:2015 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components; German version EN 81-50:2014
DIN 51631:1999-04 Special-boiling-point spirits - Requirements and testing
DIN EN 60601-2-50:2010-02 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009); German version EN 60601-2-50:2009
DIN EN IEC 61400-50-3:2023 Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for wind measurements (IEC 61400-50-3:2022); German version EN IEC 61400-50-3:2022
DIN EN 60794-2-50:2009-02 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50:2008); German version EN 60794-2-50:2008
DIN EN 16603-50-15:2017 Space engineering - CANbus extention protocol; English version EN 16603-50-15:2017
DIN EN 60601-2-50:2002-12 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000-07 + Corrigendum March 2001); German version EN 60601-2-50:2002
DIN IEC 60335-2-50 E:2022 Draft Document - Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie (IEC 60335-2-50:2021)
DIN EN 16603-50:2014-11 Space engineering - Communications; English version EN 16603-50:2014
DIN EN 16603-50 E:2020 Draft Document - Space engineering - Communications; English version prEN 16603-50:2020
DIN EN IEC 61400-50-3:2023-05 Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for wind measurements (IEC 61400-50-3:2022); German version EN IEC 61400-50-3:2022
DIN EN 60335-2-50:2008-11 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie (IEC 60335-2-50:2002 + A1:2007); German version EN 60335-2-50:2003+A1:2008
DIN EN IEC 61400-50-1:2024 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments (IEC 61400-50-1:2022); German version EN IEC 61400-50-1:2022
DIN EN IEC 60601-2-50:2022 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2020); German version EN IEC 60601-2-50:2021
DIN ISO 128-50:2002-05 Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections (ISO 128-50:2001)
DIN EN 16603-50-51:2014 Space engineering - SpaceWire protocol identification; English version EN 16603-50-51:2014
DIN EN IEC 60794-2-50:2024-02 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50:2023); German version EN IEC 60794-2-50:2023
DIN EN IEC 61400-50-1:2024-03 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments (IEC 61400-50-1:2022); German version EN IEC 61400-50-1:2022
DIN EN IEC 60794-2-50:2021 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50:2020); German version EN IEC 60794-2-50:2020
DIN EN IEC 60794-2-50:2024 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50:2023); German version EN IEC 60794-2-50:2023
DIN 51631 E:2018 Draft Document - Mineral spirits - Special boiling point spirits - Requirements
DIN 51631:2019 Mineral spirits - Special boiling point spirits - Requirements
DIN EN 16603-50-53:2015 Space engineering - SpaceWire - CCSDS packet transfer protocol; English version EN 16603-50-53:2015
DIN 13-50 E:2016 Draft Document - ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
DIN EN 60601-2-50:2017-09 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009 + Cor. 1:2010 + A1:2016); German version EN 60601-2-50:2009 + A11:2011 + A1:2016
DIN EN 16603-50-14:2014 Space engineering - Spacecraft discrete interfaces; English version EN 16603-50-14:2014
DIN EN 16603-50-16:2021 Space engineering - Time triggered Ethernet; English version prEN 16603-50-16:2021
DIN EN 16603-50-11:2020 Space engineering - SpaceFibre - Very high-speed serial link; English version EN 16603-50-11:2020
DIN EN IEC 60601-2-50:2024 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2020 + AMD1:2023); German version EN IEC 60601-2-50:2021 + A1:2023

Indonesia Standards

SNI 06-4882-1998 Special boiling point (SBP)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0750-2-50-2010 Medizinische elektrische Geraete - Teil 2-50: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Saeuglings-Phototherapiegeraeten (IEC 60601-2-50:2009); Deutsche Fassung EN 60601-2-50:2009
VDE 0750-2-50-2017 Medizinische elektrische Geraete - Teil 2-50: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Saeuglings-Phototherapiegeraeten (IEC 60601-2-50:2009 + Cor. 1:2010 + A1:2016); Deutsche Fassung EN 60601-2-50:
VDE 0700-50-2008 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie (IEC 60335-2-50:2002 + A1:2007); German version EN 60335-2-50:2003+A1:2008
VDE 0750-2-50-2002*DIN EN 60601-2-50:2002 Medical electrical equipment Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000 + amendment März 2001)
VDE 0887-969-50-2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4@11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) (IEC 61169-50:2014); German version EN 61169-50:201
VDE 0700-50 A2-1999*DIN EN 60335-2-50/A2:1999 Safety of electrical appliances Part 2-50: Particular requirements for commercial electric heating retainers (IEC 60335-2-50:1995/A2:1998)
VDE 0700-50-2003*DIN EN 60335-2-50:2003 Safety of household and similar electrical appliances - Part 2-50: Particular requirements for commercial electric baths
VDE 0750-2-50/A1-2015 Medizinische elektrische Geraete - Teil 2-50: Besondere Festlegungen fuer die Sicherheit einschliesslich der wesentlichen Leistungsmerkmale von Saeuglings-Phototherapiegeraeten (IEC 62D/1213/CDV:2015); Deutsche Fassung EN 60601-2-50:2009/FprA1:2015
VDE 0700-50-2001*DIN EN 60335-2-50:2001 Safety of household and similar electrical appliances - Part 2-50: Particular requirements for commercial electric baths

Electronic Components, Assemblies and Materials Association

364-50-1983 TP-50 Sand and Dust Test Procedure for Electrical Connectors

American Concrete Institute

ACI SP-50 SL 50-1 Re-examining the EI value for slender columns

Swedish Institute for Standards

SIS 14 51 50-1973 Brass
SIS 14 51 50-1967 Brass 51 50
SIS SS 14 50 13-1985 Wrought copper - SS-copper 50 13- Tough pitch copper
SIS SS 14 50 30-1985 Wrought copper - SS-copper 50 30 - Silver-bearing copper
SIS SS 14 23 50-1987 Stainless steel - SS steel 23 50
SIS SS 14 42 50-1987 Aluminium cast alloy - SS-aluminium 42 50 - Al-Si9Cu3
SIS SS 14 51 50-1985 Wrought copper alloy — SS-brass 51 50 - CuZn37
SIS SS 14 15 50-1990 General engineering steel — SS-steel 15 50
SIS SS 14 14 50-1990 General engineering steel — SS-steel 14 50
SIS SS 14 16 50-1990 General engineering steel — SS-steel 16 50
SIS SS 14 50 10-1988 Wrought copper - SS-copper 50 10 - Copper for electrical purposes
SIS SS 14 50 15-1985 Wrought copper - SS-copper 50 15 - Phosphorus-deoxidized copper (Cu-DHP)
SIS SS 14 50 11-1988 Wrought copper - SS-copper 50 11 - Oxygen-free copper for electrical purposes
SIS SS 03 15 50-1986 Note: ss03 15 50, mark...valid until January 1, 1986
SIS SEN 01 02 50-1964 Electrotechnical vocabulary Electrochemistry and electrometallurgy
SS-EN IEC 61400-50:2023 Wind energy generation systems - Part 50: Wind measurement - Overview

Bureau of Indian Standards

IS 10810-50-1984 Methods of test for cables:Part 50 Bending test
IS 1885 Pt.50-1985 Electrician's Vocabulary Part 50 Remote Control
IS 10810 Pt.50-1984 Test methods for bending tests on electric cables Part 50
IS/IEC 61400-50-2022 Wind Energy Generation Systems - Part 50 Wind Measurement-Overview
IS 1448-50-2021 Methods of test for petroleum and its products: Part 50 Chlorine in new and used lubricants (sodium alcoholate method)
IS 3025-50-2023 Methods Of Sampling And Test Physical And Chemical For Water And Wastewater Part 50 Jar Test Second Revision
IS 1448 Pt.50-1977 Test methods for petroleum and its products [P: 50] Chlorine in new and old lubricating oils (sodium alkoxide method)
IS 10714-50-2020 Technical Product Documentation ( TPD ) — General Principles of Presentation Part 50 Basic Conventions for Representing Areas on Cuts and Sections
IS 13730-50-2018 Specifications for Particular Types of Winding Wires Part 50 Glass-Fibre Wound, Silicone Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Class 200 ( First Revision )

Engineering Sciences Data Unit (ESDU)

ESDU 87028-1987 Melting points@ boiling points and critical properties.
ESDU 72006-1972 Normal melting points@ boiling points and critical points of monobasic alkanoic acids.
ESDU 71023 A-1976 Normal melting points@ boiling points and critical points of n-alkyl aldehydes and ketones.
ESDU 71021-1971 Normal melting points@ boiling points and critical points of branched chain esters of monobasic alkanoic acids.

International Electrotechnical Commission (IEC)

IEC 62047-50:2025 Part 50: MEMS capacitive microphones
IEC 61400-50:2022 Wind energy generation systems - Part 50: Wind measurement - Overview
IEC 60050-50:1960 International Electrotechnical Vocabulary (IEV) - Part 50: Electrochemistry and electrometallurgy
IEC 61169-50:2014 Radio-frequency connectors - Part 50: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristics impedance 50 Ohm (type QMA)
IEC 62047-50:2025 PRV Semiconductor devices - Micro-electromechanical devices - Part 50: MEMS capacitive microphones
IEC 60793-1-50:2001 Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state)
IEC 60793-2-50:2018 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 60793-2-50:2002 Optical fibres - Part 2-50: Product specifications; Sectional specification for class B single-mode fibres
IEC 60793-2-50:2015 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 60793-1-50:2014 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
IEC 60793-2-50:2004 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 60793-2-50:2012 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 60793-2-50:2008 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 61400-50-2:2022 Wind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology
IEC 60601-2-50:2023 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment
IEC 60601-2-50:2000 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment
IEC 61811-50:1997 Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality
IEC 60793-2-50:2025 CMV Optical fibres - Part 2-50: Product specifications - Sectional specification for class B singlemode fibres
IEC 60793-2-50:2018 RLV Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

Czech Standards Institute (UNMZ)

CSN 57 1170-1979 High scalded hard cheeses
CSN 50 0452-1988 Condenser páper. Determination of breakdown voltage at alternating (50 Hz) and direct voltage
CSN 50 3175 Za-1987 Revision a- 9/1987 Czech National Standard 50 3175 Electrical Tape. General provisions
CSN 50 2613 Zb-1990 Revision b) 50 2613 Czech National Standard 12/1990 Electrical Paper. electrolytic capacitor paper

Institute of Electrical and Electronics Engineers (IEEE)

RDD 50:2019 RDD 50:2019 - SMPTE Registered Disclosure Doc - Avid DNxUncompressed — Packing definition and mapping to the MXF Generic Container
SMPTE RDD 50:2019 RDD 50:2019 - SMPTE Registered Disclosure Doc - Avid DNxUncompressed — Packing definition and mapping to the MXF Generic Container
SMPTE RP 50:1995 RP 50:1995 - SMPTE Recommended Practice - Dimensions for 8-mm Type S Motion-Picture Projector Reel Spindles
ST 2067-50:2018 ST 2067-50:2018 - SMPTE Standard - Interoperable Master Format — Application #5 ACES
SMPTE ST 2067-50:2018 ST 2067-50:2018 - SMPTE Standard - Interoperable Master Format — Application #5 ACES

American Society for Testing and Materials (ASTM)

ASTM MNL50-70 Characterization and Properties of Petroleum Fractions, Manual 50
ASTM D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D7798-20 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
ASTM D6352-04 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D7213-05e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography

Standard Association of Australia （SAA）

HB 76 (SET 50)-2004 Dangerous goods - Initial emergency response guide (50 copies)

Austrian Standards

OVE/ONORM E 8001-4-50-2001 Erection of electrical installations with rated voltages up to～1000 V and = 1500 V - Part 4-50:Locations with resk of fire

Lithuanian Standards Office

LST EN 60793-1-50-2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests (IEC 60793-1-50:2014)
LST EN 60793-1-50-2003 Optical fibres. Part 1-50: Measurement methods and test procedures. Damp heat (steady state) (IEC 60793-1-50:2001)
LST EN 60793-2-50-2009 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2008)
LST ISO 128-50:2004 Technical drawings. General principles of presentation. Part 50: Basic conventions for representing areas on cuts and sections (idt ISO 128-50:2001)
LST EN 60335-2-50-2005 Household and similar electrical appliances. Safety. Part 2-50: Particular requirements for commercial electric bains-marie (IEC 60335-2-50:2002)
LST EN 61811-50-2003 Electromechanical all-or-nothing relays. Part 50: Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality (IEC 61811-50:2002)
LST EN 60317-50-2013 Specifications for particular types of winding wires -- Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:2012)
LST EN 60601-2-50-2009 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009)
LST EN 60317-50-2002 Specifications for particular types of winding wires. Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999)
LST EN 60794-2-50-2008 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50:2008)
LST EN IEC 60601-2-50:2021 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2020)
LST EN 60794-3-50-2009 Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes (IEC 60794-3-50:2008)

International Truck and Engine Corporation (ITEC)

INTERN CEMS BT-40-2009 Determination Of Equilibrium Boiling Range And High Boiling Impurities in Air Conditioner Refrigerant

American Society of Mechanical Engineers (ASME)

ASME SEC IX INT VOL 50-2002 Interpretations Volume 50 - Section IX
ASME SEC I INT VOL 50-2002 Interpretations Volume 50 - Section I
ASME SEC XI INT VOL 50-2002 Interpretations Volume 50 - Section XI
ASME SEC V INT VOL 50-2002 Interpretations Volume 50 - Section V
ASME SEC IV INT VOL 50-2002 Interpretations Volume 50 - Section IV
PTC 50-2002(R2019) PTC 50 - Fuel Cell Power Systems Performance
ASME SEC II-A INT VOL 50-2002 Interpretations Volume 50 - Section II-A
ASME SEC VIII-2 INT VOL 50-2002 Interpretations Volume 50 - Section VIII-2
ASME SEC III-NCA INT VOL 50-2002 Interpretations Volume 50 - Section III-NCA
ASME SEC VIII-1 INT VOL 50-2002 Interpretations Volume 50 - Section VIII-1
ASME SEC II-B INT VOL 50-2002 Interpretations Volume 50 - Section II-B

American Welding Society (AWS)

WRC Volume 50 No. 05-06:1995 Progress Reports Volume 50 No. 05-06 1995
WRC Volume 50 No. 07-08:1995 Progress Reports Volume 50 No. 07-08 1995
WRC Volume 50 No. 03-04:1995 Progress Reports Volume 50 No. 03-04 1995
WRC Volume 50 No. 01-02:1995 Progress Reports Volume 50 No. 01-02 1995
WRC Volume 50 No. 09-10:1995 Progress Reports Volume 50 No. 09-10 1995
WRC Volume 50 No. 11-12:1995 Progress Reports Volume 50 No. 11-12 1995

Gosstandart of Russia

GOST 33594-2015 Cooling liquids. Determination of boiling point

Spanish Association for Standardization (UNE)

UNE 26376:1987 BRAKE FLUIDS. WET REFLUX BOILING POINT.
UNE 26375:1987 BRAKE FLUIDS. EQUILIBRIUM REFLUX BOILING POINT.
UNE 26-376-1987 Wet reverse flow boiling point of refrigerant liquid
UNE 26-375-1987 Stable reverse flow boiling point of refrigerant liquid
AENOR UNE 20527-7-50-3-1:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-3-1
AENOR UNE 20527-7-50-2-1:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-2-1
UNE-EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) (Endorsed by AENOR in April of 2015.)
AENOR UNE 20527-7-50-17-3:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-17-3
AENOR UNE 20527-7-50-12-1:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-12-1
AENOR UNE 20527-7-50-7-6:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-7-6
AENOR UNE 20527-7-50-7-4:1979 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-7-4
AENOR UNE 20527-7-50-3-5:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-3-5
AENOR UNE 20527-7-50-7-3:1980 CABLES FOR RADIO FREQUENCIES. PARTICULAR SPECIFICATIONS. CABLES 50-7-3
UNE-EN IEC 61400-50:2023 Wind energy generation systems - Part 50: Wind measurement - Overview

European Committee for Electrotechnical Standardization（CENELEC）

EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)
EN 60601-2-50:2002 Medical Electrical Equipment Part 2-50: Particular Requirements for the Safety of Infant Phototherapy Equipment IEC 60601-2-50: 2000 + Corrigendum March 2001
EN IEC 61400-50:2022 Wind energy generation systems - Part 50: Wind measurement - Overview
EN 60793-2-50:2008 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
EN 60793-2-50:2016 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
EN 60793-2-50:2013 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
EN 60793-1-50:2002 Optical Fibres - Part 1-50: Measurement Methods and Test Procedures - Damp Heat (Steady State)
EN 60793-2-50:2002 Optical fibres Part 2-50: Product specifications – Sectional specification for class B single-mode fibres
EN 60793-2-50:2019 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
EN 60793-2-50:2004 Optical fibres Part 2-50: Product specifications – Sectional specification for class B single-mode fibres (Incorporating Corrigendum July 2004)
EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests

(U.S.) Telecommunications Industries Association

455-50A-1987 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements

Korean Agency for Technology and Standards (KATS)

KS M 1212-2016 Testing methods for high boiling point solvents
KS M 1212-1984 Testing methods for high boiling point solvents
KS M 1071-2-2007 Determination of boiling temperature for chemical agents
KS M 1212-2016(2021) Testing methods for high boiling point solvents
KS M 1212-2021 Testing methods for high boiling point solvents
KS C IEC 61400-50-2024 Wind energy generation systems — Part 50: Wind measurement — Overview

Finnish Standards Institute

SFS 2808-1973 textile. Boiling point persistence (boiling water persistence) determination of color

American National Standards Institute （ANSI)

ANSI/ARESCA 61400-50:2023 Wind energy generation systems - Part 50: Wind measurement - Overview

Military Standards (MIL-STD)

MIL MIL-S-64045/50A-1985 SCALE, GRAPHICAL FIRING, HE M549A1, LOW ANGLE, (155-AO-0) CHG 8R, (P/N 11785434-50) (SUPERSEDING MIL-S-64045/50)
MIL MIL-C-39029/50A-1980 CONTRACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-83733 CONNECTORS) (SUPERSEDING MIL-C-39029/50) (S/S BY SAE-AS39029/50)

International Federation of Trucks and Engines

NAVISTAR CEMS BT-40-2009 Determination Of Equilibrium Boiling Range And High Boiling Impurities in Air Conditioner Refrigerant

Magyar Szabványügyi Testület

MSZ KGST 2266-1980 Boiling point conical fireplace standards

British Standards Institution (BSI)

BS 5000-50:1982 Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors
PD CEN/TS 12697-50:2016 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing

International Telecommunication Union (ITU)

ITU-T P.50 ERRATUM 1-2000 P.50 Erratum 1
ITU-T K.50 Erratum 1-2021 Erratum 1 (03/2021) to Recommendation ITU-T K.50 (2018), ITU-T K.50 (2018) Amendment 1(2020) and ITU-T K.50 (2018) Corrigendum 1(2020)
ITU-T R.50-1976 Tolerable limits for the degree of isochronous distortion of 50-baud telegraph circuits

National Association of Corrosion Engineers (NACE)

NACE Paper 02194-2013 Corrosion performance of nickel-based alloys in dilute hydrochloric acid and sulfuric acid near and above boiling points

Associação Brasileira de Normas Técnicas

ABNT MB-50-1964 Test Methods for Flash Point and Fire Point Testing (Cleveland Open Containers)

European Standard for Electrical and Electronic Components

CECC 50 001- 021 NEN CECC 50 001-021; Silicon Diodes in Glass Envelope; BAW62 (1N914, 1N916, 1N4148, 1N4149, 1N4446, 1N4447, 1N4448, 1N4449, CV7367, CV7368, CV7757, CV8616, CV9637) (En)

Japanese Industrial Standards Committee (JISC)

JIS K 1545:1978 Testing methods for high boiling point solvents

International Civil Aviation Organization

ICAO AN 11 AMD 50-B-2016 Annex 11 - Air Traffic Services; Amendment 50-B

Comitato Elettrotecnico Italiano

CEI EN IEC 61400-50:2023 Wind energy generation systems Part 50: Wind measurement - Overview
CEI EN 61169-50:2015 Radio-frequency connectors Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)
CEI EN 60793-1-50:2015 Optical fibres Part 1-50: Measurement methods - Damp heat (steady state) tests

National Fire Protection Association (NFPA)

NFPA 50-2001 Standard for Bulk Oxygen Systems at Consumer Sites

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

E42 50-1969 International Electronic Glossary Group 50. Electrometallurgy and Electrochemistry

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 12697-50:2016 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing
UNI CEN/TS 12697-50:2018 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing
UNI ISO 128-50:2006 Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections

U.S. Military Regulations and Norms

ARMY UFGS-05 50 15-2008 CIVIL WORKS FABRICATIONS

United States Navy

NAVY UFGS-05 50 13-2008 MISCELLANEOUS METAL FABRICATIONS [Superseded: NAVY UFGS-05 50 00]

Portuguese Institute of Quality

NP EN 60335-2-50-2000 Safety of household and similar electrical appliances Part 2-50:Particular requirements for commercial electric bains-marie(IEC 60335-2-50-1995+A1-1996+A2-1998)

Cuban Institute of Standards and Metrology

NC 33-50-1986 Oil and Oil Products Aniline Point Determination

South African Bureau of Standard

SANS 60793-2-50:2008 Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 8-50-2005 Technical drawings.General principles of presentation.Part 50: Basic conventions for representing areas on cuts and sections

Standards Norway

SN-CEN/TS 12697-50:2018 Bituminous mixtures — Test methods — Part 50: Resistance to scuffing

Danish Standards Foundation

DANSK DS/EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA)
DS/EN 60793-1-50:2002 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state)