mandrel experiment

mandrel experiment, Total:239 items.

The international standard classification for "mandrel experiment" includes: Fluid power systems , Keys and keyways, splines , Drills, countersinks, reamers , Gears , Components for aerospace construction , Dividing and tool-workpiece holding devices , Filters, seals and contamination of fluids , Brazing and soldering .

The Chinese standard classification for "mandrel experiment" includes: Technical management , Hydraulic and pneumatic device , Coupling, brake and speed variator , Cutting tools , Gear and gear drive , Mechanical gadgets and components , Papermaking in general , Welding and cutting .

Professional Standard - Electron

SJ/T 9556.2-1993 Coaxial radio-frequency cables with solid polytruoroethylene dielectric insulation--Quality grading standard
SJ/T 1563-1980 Coaxial radio-frequency cables with solid polytrafluoroethylene dielectric
SJ/T 9556.1-1993 Coaxial radio-frequency cables with solid polyethylene dielectric insulation--Quality grading standard
SJ 2644.3.2-1985 Cold press dies - Spring mandril

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1135-2004 Shell machine reamers and arbors
GB/T 28878.3-2016 Specification of the rotating component in space science experiments—Part 3：Ball bearing acceptance
GB/T 14864-1993 Radio frequency cables with solid polyethylene dielectric
GB/T 10614-1989 Resilient coupling with core element
GB/Z 18620.3-2008 Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks shaft centre distance and parallelism of axes
GB/T 10614-2008 Resilient coupling with core element
GB/T 14041.4-1993 fluid power-Filter elements - Method for end load test

Professional Standard - Aerospace

QJ 2989-1997 Common Parts of Bend Fixture - Copper Core Shaft with Snap-head
QJ 2990.2-1997 Common Parts of Bend Fixture - Movable Steel Core Shaft - Movable Steel Core Shaft Tube
QJ 2990-1997 Common Parts of Bend Fixture - Movable Steel Core Shaft
QJ 2991.1-1997 Common Parts of Bend Fixture - Movable Copper Core Shaft - Copper Snap Head
QJ 2050-1991 Specification for real-time life test of bearings used in spacecraft
QJ 2988-1997 Common Parts of Bend Fixture - Steel Core Shaft with Snap-head
QJ 2991-1997 Common Parts of Bend Fixture - Movable Copper Core Shaft
QJ 2991.2-1997 Common Parts of Bend Fixture - Movable Copper Core Shaft - Movable Copper Core Shaft Tube

Group Standards of the People's Republic of China

T/CTWPDA 09-2019 Solid wood composite flooring substrate with thick core
T/LZBX 002-2017 xiangsha solid wood core

Professional Standard - Forestry

LY/T 3301-2022 Thick solid wood core plywood

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2338-2021 Qualitative analysis of pathogenic nucleic acid in experimental animals by liquid-phase chip method
DB44/T 2339-2021 Qualitative Analysis of Laboratory Animal Pathogen Antibody by Liquid Chip

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41104.3-2021 Solder wire,solid and flux cored―Specifications and test methods―Part 3:Wetting balance test method for flux cored solder wire efficacy
GB/T 40168-2021 Corrugating medium—Determination of the edge crush resistance after laboratory fluting
GB/T 14041.4-2019 Hydraulic fluid power—Filter elements—Part 4:Method for rated end load test

Professional Standard - Post and Telecommunication

YD/T 2651-2013 Communication cables - Solid polytetrafluoroethylene dielectric, tin soaked braid outer conductors, radio frequency coaxial cables

未注明发布机构

DIN EN ISO 14171 E:2015-08 Welding consumables Classification of solid wire, solid wire and flux-cored wire mixed fluxes for submerged arc welding of non-alloy and fine-grained steels (draft)
DIN ISO 11093-5 E:2016-08 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation

Professional Standard - Machinery

JB/T 8143.4-1995 Shipboard radio-frequency cables Radio-frequency coaxial cables with PTFE insulated coppor clad,Steel conductor rated characteristic impedance 75Ω
JB/T 8143.3-1995 Shipboard radio-frequency cables Radio-frequency coaxial cables with polyethelene in sulated copper conductor,rated characteristic impedance 75Ω
JB/T 8143.2-1995 Shipboard radio-frequency cables Radio-frequency coaxial cables with PTFE insulated copper conductor,rated charaeteristic impedance 50Ω
JB/T 8143.1-1995 Shipboard radio-frequency cables Radio-frequency coaxial cables with polyethelene insulated copper conductor,rated characteristic impedance 50Ω

GSO

OS GSO ISO 1651:2013 Tube drawing mandrels
GSO ISO 1651:2013 Tube drawing mandrels
OS GSO ISO 15980:2013 Open end blind rivets with break pull mandrel and countersunk head -- St/St
OS GSO ISO 15982:2013 Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA
BH GSO ISO 15978:2016 Open end blind rivets with break pull mandrel and countersunk head -- AIA/St
GSO ISO 15984:2013 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
OS GSO ISO 15984:2013 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
GSO ISO 15983:2014 Open end blind rivets with break pull mandrel and protruding head -- A2/A2
GSO ISO 15980:2013 Open end blind rivets with break pull mandrel and countersunk head -- St/St
GSO ISO 15975:2013 Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA
BH GSO ISO 15975:2016 Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA
OS GSO ISO 15981:2013 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
BH GSO ISO 15984:2016 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
BH GSO ISO 15981:2016 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
OS GSO ISO 15983:2014 Open end blind rivets with break pull mandrel and protruding head -- A2/A2
GSO ISO 7263:2015 Corrugating medium -- Determination of the flat crush resistance after laboratory fluting
GSO IEC 60313:2014 Coaxial connectors used in nuclear laboratory instrumentation
GSO ISO 6148:2016 Photography -- Micrographic films, spools and cores -- Dimensions
OS GSO ISO 6148:2016 Photography -- Micrographic films, spools and cores -- Dimensions
BH GSO IEC 60313:2016 Coaxial connectors used in nuclear laboratory instrumentation
OS GSO IEC 60313:2014 Coaxial connectors used in nuclear laboratory instrumentation
GSO ISO 6279:2014 Plain bearings -- Aluminium alloys for solid bearings

Korean Agency for Technology and Standards (KATS)

KS M ISO 6860-2012(2017) Paints and varnishes－Bend test(conical mandrel)
KS M ISO 1519-2012(2017) Paints and varnishes－Bend test(cylindrical mandrel)
KS B ISO 15973-2023 Closed end blind rivets with break pull mandrel and protruding head－AIA/St
KS E 3142-1990(2010) Core shell couplings for core dril1s
KS X ISO 6148-2007(2022) Photography－Micrographic films, spools and cores－Dimensions
KS X ISO 6148-2022 Photography－Micrographic films, spools and cores－Dimensions
KS B ISO 18274:2019 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
KS B ISO 16583-2019 Open end blind rivets with break pull mandrel and countersunk head－Cu/St or Cu/Br or Cu/SSt
KS X ISO 6148-2007(2017) Photography－Micrographic films, spools and cores－Dimensions

SCC

BS EN ISO 1519:2002 Paints and varnishes. Bend test (cylindrical mandrel)
BS 2B 8:1930 Specification for aircraft material. Phosphor bronze castings for bearings (including solid and cored sticks)
UNE 57006:1979 PAPER. INTERNAL DIAMETERS OF PAPER REELS CORES
DANSK DS/EN ISO 15982:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
DANSK DS/EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head - AIA/St
DANSK DS/EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head - A2/A2
BS 7349-1:1993 Blind rivets with break mandrel-Specification for closed end blind rivets
AENOR UNE-EN ISO 16585:2003 Closed end blind rivets with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)
DANSK DS/EN ISO 16585:2003 Closed end blind rivets with pull mandrel and protruding head - A2/SSt
NS-EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head — A2/A2 (ISO 15984:2002)
AENOR UNE-EN ISO 15976:2003 Closed end blind rivets with break pull mandrel and protruding head. St/St (ISO15976:2002).
NS-EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA (ISO 15982:2002)
NS-EN ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/St (ISO 15978:2002)
NS-EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head — St/St (ISO 15980:2002)
AENOR UNE-EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)
DANSK DS/EN ISO 16584:2003 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt
AENOR UNE-EN ISO 15978:2003 Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)
AENOR UNE-EN ISO 15984:2003 Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
NS-EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/AIA (ISO 15981:2002)
AENOR UNE-EN ISO 15980:2003 Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
NS-EN ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head — AIA/St (ISO 15974:2000)
NS-EN ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head — A2/A2 (ISO 15983:2002)
AS 1911:1976 Solid bearing housings
AENOR UNE-EN ISO 15979:2003 Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
AENOR UNE-EN ISO 15983:2003 Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
AENOR UNE-EN ISO 15975:2003 Closed end blind rivets with break pull mandrel and protruding head. AI/AIA (ISO 15975:2002).
NS-EN ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head — AIA/St (ISO 15973:2000)
NS-EN ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head — St/St (ISO 15976:2002)
NS-EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/St (ISO 15977:2002)
DANSK DS/EN ISO 16583:2003 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
AWWA WKICO66055 Punctual Profiling of Inorganic Contaminants Using Lab-on-Chip Technology
NS 339:1968 Solid pedestal bearings
MIL MIL-DTL-10215M-2010 Speedometers, Tachometers, Flexible Shaft Assemblies, Flexible Shaft Assembly Cores and Adapters
MIL MIL-DTL-10215N-2019 Speedometers, Tachometers, Flexible Shaft Assemblies, Flexible Shaft Assembly Cores and Adapters
AENOR UNE-EN ISO 15982:2003 Open end blind rivets with break pull mandrel and countersrunk head. AIA/AIA (ISO 15982:2002)
BS ISO/TR 10064-3:1996 Code of inspection practice-Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
AENOR UNE-EN ISO 15974:2002 Closed end blind rivets with break pull mandrel and countersunk head. AIA/St. (ISO 15974:2000).
DANSK DS/EN ISO 16582:2003 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt
NS-EN ISO 12224-3:2003 Solder wire, solid and flux cored — Specifications and tests methods — Part 3: Wetting balance test method for flux cored solder wire efficacy (ISO 12224-3:2003)

IT-UNI

UNI ISO 1651:1977 Pipe spinning mandrel
UNI 5072-1979 Test conditions for machine tools. Internal cylindrical grinding machines with horizontal spindle.
UNI 4210-1963 Rolling bearings; radial bearings; steel bearings; single ring ball bearings; mandrel bearings; 03* size series, replacing UNI 3069
UNI 4209-1963 Rolling bearings; radial bearings; steel bearings; single ring ball bearings; mandrel bearings. 02* size series, replaces UNI 3068
UNI 4608-1960 Shortened bushing with connection cone and mandrel flange with taper 7/24

International Organization for Standardization (ISO)

ISO 18274:2023 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO 16945:2014 Corrugating medium - Determination of the edge crush resistance after laboratory fluting
ISO 12224-1:1997 Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements
ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO 7263:1994 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO 21866-1:2020 Plain bearings — Automotive engine bearing test rig using actual connecting rods — Part 1: Test rig
ISO/PRF 12224-1:2024 Solder wire, solid and flux-cored
ISO/PRF 12224-2:2024 Solder wire, solid and flux-cored
ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
ISO 1039:1995 Cinematography - Cores for motion-picture and magnetic film rolls - Dimensions

Standard Association of Australia （SAA）

AS/NZS ISO 18274:2023 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification

SAE - SAE International

SAE AE-14-1989 Multiaxial Fatigue Analysis and Experiments

American Society for Testing and Materials (ASTM)

ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4341-03 Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression
ASTM D4341-93(1998) Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression
ASTM D4406-93(1998) Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4406-04 Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D4338-97(2016) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM D4405-04 Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions
ASTM D4405-93(1998) Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions
ASTM F3109-16 Standard Test Method for Verification of Multi-Axis Force Measuring Platforms
ASTM F3109-23 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
ASTM F3109-22 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
ASTM F310-70(2000) Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM F3109-23 Red Standard Practice for Verification of Multi-Axis Force Measuring Platforms (Standard + Redline PDF Bundle)
ASTM F137-08 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM E467-21 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM F137-08(2013) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM B331-20 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

CZ-CSN

CSN 72 1031-1987 Laboratory triaxial shear test of soils

German Institute for Standardization

DIN ISO 11093-1:1998 Paper and board - Testing of cores - Part 1: Sampling (ISO 11093-1:1994)
DIN ISO 11093-4:1998 Paper and board - Testing of cores - Part 4: Measurement of dimensions (ISO 11093-4:1997)
DIN EN ISO 12224-1:1998 Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997); German version EN ISO 12224-1:1998
DIN EN ISO 7263:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008); English version of DIN EN ISO 7263:2009-05
DIN ISO 11093-2:1998 Paper and board - Testing of cores - Part 2: Conditioning of test samples (ISO 11093-2:1994)
DIN 65552:1993-12 Aerospace; blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel, metric series
DIN ISO 11093-4:2017 Paper and board - Testing of cores - Part 4: Measurement of dimensions (ISO 11093-4:2016)
DIN IEC 60313:2002 Coaxial connectors used in nuclear laboratory instrumentation (IEC 60313:2002)
DIN IEC 60313:2002-12 Coaxial connectors used in nuclear laboratory instrumentation (IEC 60313:2002)
DIN ISO 11093-9:2007 Paper and board - Testing of cores - Part 9: Determination of flat crush resistance (ISO 11093-9:2006) English version of DIN ISO 11093-9:2007-02
DIN ISO 13542:2007 Paper and board - Specification for internal diameters of cores for reels (ISO 13542:2006) English version of DIN ISO 13542:2007-03
DIN ISO 11093-3:1998 Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven-dry method (ISO 11093-3:1994)
DIN ISO 11093-5:2017 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation (ISO 11093-5:2016)

SE-SIS

SIS 74 13 25 E-1969 Core drilling equipment Core barrels, type B Extension couplings
SIS 74 13 36 E-1969 Core drilling equipment Core barrels, type Z Extension couplings
SIS 74 13 02-1969 Core drilling equipment. Drill-rod couplingg
SIS 74 13 06 E-1969 Core drilling equipment Fishing-rod couplings

British Standards Institution (BSI)

BS EN ISO 12224-1:1998 Solder wire, solid and flux cored - Specification and test methods - Classification and performance requirements
BS 2B 8:1930(2000) Specification for Aircraft material — Phosphor bronze castings for bearings — (including solid and cored sticks)
BS EN ISO 12224-2:1999 Solder wire, solid and flux cored - Specification and test methods - Determination of flux content
BS EN ISO 15984:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — A2 / A2
BS EN ISO 15978:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — AIA / St
BS EN ISO 15982:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — AIA / AIA
BS EN ISO 15980:2002(2004) Open end blind rivets with break pull mandrel and countersunk head — St / St
BS EN ISO 15983:2002(2004) Open end blind rivets with break pull mandrel and protruding head — A2 / A2
BS ISO 16945:2014 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
BS ISO 21866-1:2020 Plain bearings. Automotive engine bearing test rig using actual connecting rods. Test rig
BS EN ISO 7263:2011 Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS IEC 60313:2002 Coaxial connectors used in nuclear laboratory instrumentation
BS EN 756:2004 Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
BS ISO 6279:2006 Plain bearings - Aluminium alloys for solid bearings
BS ISO 6279:2017 Plain bearings. Aluminium alloys for solid bearings
BS EN ISO 17892-9:2018 Geotechnical investigation and testing. Laboratory testing of soil. Consolidated triaxial compression tests on water saturated soils
BS EN 14951:2006 Solid hardwood paneling and cladding - Machined profiles elements

Indonesia Standards

SNI 2815-2011 How to test triaxial compression on stone in the laboratory

Society of Automotive Engineers (SAE)

SAE AS2223-3-1988 AS2223 Shaft for Pedal Spool (Rudder Bar)
SAE AS6347-2-1956 AS6347 Shaft for Pedal Spool - Rudder Bar
SAE J1200-1977 Blind Rivets - Break Mandrel Type

IFI/FASTNR - Industrial Fastener Institute

114-2013 Break Mandrel Blind Rivets
117-1986 Pull Through Mandrel Blind Rivets
114-2015 Break Mandrel Blind Rivets
114-2014 Break Mandrel Blind Rivets
116-2013 Multi-Grip Break Mandrel Blind Rivets
116-2014 Multi-Grip Break Mandrel Blind Rivets
116-2015 Multi-Grip Break Mandrel Blind Rivets
520-1982 Metric Pull Through Mandrel Blind Rivets
126-1986 Break Mandrel Closed End Blind Rivets
114-2003 Standard for Break Mandrel Blind Rivets
505-1982 Metric Break Mandrel Blind Rivets
505-1999 Metric Break Mandrel Blind Rivets
520-1999 Metric Pull Through Mandrel Blind Rivets (3rd Edition)
133-1984 Aluminum Wire for Blind Rivet Mandrels and Bodies
521-1982 Metric Structural Self Plugging Pull Mandrel Blind Rivets - Type 2B

RU-GOST R

GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
GOST 22334-1993 Trunnions for wooden cast patterns. Design
GOST 21717-1976 Hubs for magnetic tapes. Specifications
GOST R ISO 7263-2011 Corrugating medium. Method for determination of the flat crush resistance after laboratory fluting
GOST 12796-1977 Hubs for magnetic tape with a nominal width of 6,25 mm. Specifications
GOST 19373-1974 Pads for trunnions of aluminium core boxes. Dimensions

AT-ON

ONORM E 1356-1968 Detector. Check the mandrel and stylus
ONORM E 1372-1955 Detector. Ball pressure detector, heating mandrel detector
ONORM E 1360-1960 Detector. Ball pressure detector, heating mandrel detector

International Electrotechnical Commission (IEC)

IEC 60313:2002 Coaxial connectors used in nuclear laboratory instrumentation

IPC - Association Connecting Electronics Industries

IPC J-STD-013 CD-1996 Implementation of Flip Chip and Chip Scale Technology
IPC J-STD-012 CD-1996 Implementation of Flip Chip and Chip Scale Technology
IPC J-STD-012-1996 Implementation of Flip Chip and Chip Scale Technology
IPC SM-784 CD-1990 Guidelines for Chip-on- Board Technology Implementation

VN-TCVN

TCVN 6897-2010 Corrugating medium.Determination of the flat crush resistance after laboratory fluting

HU-MSZT

MNOSZ 14713-1953 Enamelware for laboratory use. Bearing cover

IN-BIS

IS 13975-1994 Axial (end -to-end ) compression strength of composite cans, tubes and cores - method of test

CEN - European Committee for Standardization

EN ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting

Association Francaise de Normalisation

NF Q03-044:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting.
NF Q03-044:2011 Corrugating medium - Determination of the flat crush resistance after laboratory flutin.
NF A81-316:2004 Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification.
NF E22-571:1986 Plain bearings. Hardness testing of bearing metals. Part 2 : solid materials.

European Committee for Standardization (CEN)

EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
EN 756:1995 Welding Consumables - Wire Electrodes and Wire-Flux Combinations for Submerged Arc Welding of Non Alloy and Fine Grain Steels - Classification
EN 756:2004 Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
EN ISO 7263:1995 Corrugating Medium - Determination of the Flat Crush Resistance After Laboratory Fluting (ISO 7263 : 1994)
EN 14951:2006 Solid hardwood panelling and cladding - Machined profiles elements

Defense Logistics Agency

DLA QPL-10215-2012 Speedometers, Tachometers, Flexible Shaft Assemblies, Flexible Shaft Assembly Cores and Adapters
DLA MIL-DTL-10215 L-2008 SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS
DLA QPL-10215-2011 Speedometers, Tachometers, Flexible Shaft Assemblies, Flexible Shaft Assembly Cores and Adapters

KR-KS

KS B ISO 18274-2019 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification

GB-REG

REG NASA-LLIS-0518-1994 Lessons Learned ?Successful Prototype Reel Mechanism for use in the Gateway Tether Experiment

American National Standards Institute （ANSI)

ANSI/IEEE 1043:1996 Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
ANSI/IEEE 393:1991 Magnetic Cores, Test Procedures for

DIN

DIN EN ISO 15977:2003 Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002)

CH-SNV

VSM 18706-1964 Winding wire. Test method for rebound angle of round wire on mandrel with rated diameter 0.045 to 1.6 mm

IEC - International Electrotechnical Commission

PAS 62084-1998 Implementation of Flip Chip and Chip Scale Technology (Edition 1.0; No Replacement)

RO-ASRO

STAS 6550-1971 Radio components CONTROLLING SHAFT HEADS Types and basic dinensions

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC SM-784-1990 Guidelines for Chip-on- Board Technology Implementation