Oil mist meter

Oil mist meter, Total:206 items.

The international standard classification for "Oil mist meter" includes: Ventilation and air-conditioning systems , Environmental testing , Lubricants, industrial oils and related products .

The Chinese standard classification for "Oil mist meter" includes: Building heating and ventilation and air conditioning instrument and equipment , Material composition analysis instrument and environment detection instrument in general , Heat supply and heating engineering , Environmental Condition and General Test Method , Petroleum exploration, development, gathering and transportation equipment in general , Earth science instrument , Vacuum grease and anti-rust grease , Lubricating oil , Marine internal-combustion engine , Office supplies and office implements .

Group Standards of the People's Republic of China

T/GDIDA 005-2024 Portable Nebulizer
T/QGCML 155-2021 Control smog, environmental protection and energy saving super gasoline
T/ZZB 2850-2022 Plant Essential Oil Mosquito Repellent Spray
T/WHAEPI 004-2021 Infrared oil gauge
T/QGCML 975-2023 Fuel tank degreasing device
T/ZSHG 001-2019 Aerosol carburetor cleaner
T/ZSHG 008-2019 Aerosol type asphalt cleaner
T/CEAC 107-2025 Performance requirements and testing methods for home beauty atomizers
T/JSAMIA 009-2019 Oil-electric hybrid intelligent self-propelled boom sprayer
T/ZSHG 009-2021 Aerosol Degreaser
T/HNIMA 001-2023 Calibration method for liquid chromatograph with charged aerosol detector
T/FSI 019-2019 Glass anti-fog water-based silicone oil dispersion

Taiwan Provincial Standard of the People's Republic of China

CNS 10449-1983 Mist Type Rust Preventive Oil

未注明发布机构

FORD FLTM BV 130-1-2000 SEALER FUME TEST - EFFECT OF SEALER FUMES ON PAINT ADHESION
FORD M2C97-A-2009 EXTREME PRESSURE MIST OIL
FORD M2C97-A-1991 EXTREME PRESSURE MIST OIL

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12085.4-1989 Optics and optical instruments--Environmental test methods--Salt mist
GB/T 6165-1985 Methods for testing the performance of high efficiency particulate air filter--Penetration and resistance
GB/T 6165-2008 Test methed of the performance of high efficiency particulate air filter - Efficiency and risistance
GB/T 11606.13-1989 The method of environmental test for analytical instruments--Salt mist test
GB/T 32065.10-2020 Environmental test methods for oceanographic instruments—Part 10:Salt fog test
GB/T 6165-2021 Test method of the performance of high efficiency particulate air filter—Efficiency and resistance

Professional Standard - Petroleum

SY/T 5901-1993 Classification of Petroleum Exploration and Development Instruments
SY/T 5166-2020 Oil pumping well tester
SY 5901-2011 Classification of Petroleum Exploration and Development Instruments
SY/T 5230-1991 Basic Environment Test of Instrument for Petroleum Exploration and Development - Test C: Salt Mist Test
SY/T 5901-2011 Classificatin of Instruments Used in Petroleum Exploration and Development

Professional Standard - Machinery

JB/ZQ 4710-2006 Oil mist lubrication device
JB/T 9348.2-1999 Requirements for the prevention of mould,fog,corrosion of optical instruments
JB/T 12907-2016 Oil mist collector for machine
JB/T 9348.1-1999 The test methods for the prevention of mould,fog,corrosion of optical instruments
JB/T 7375-1994 Technical Specification for Pneumatic Atomized Lubricators
JB/T 7375-2013 Rules relating of pneumatic fluid power lubricators

Professional Standard - Surveying and Mapping

CH/T 8002-1991 The preventive of mould fog rust for surveying and mapping instruments

Professional Standard - Petrochemical Industry

SH/T 0081-1991 Salt spray test method for rust preventive oil and grease
SH/T 0216-1999 Test method for sprayability of rust preventive oils
SH/T 0216-1992 Anti-rust oil spray test method
SH/T 0138-1994 No.10 instrument oil
SH 0138-1992 instrument oil

Professional Standard-Ships

CB 3259-1985 Specifications for crankcase oil mist detectors for marine diesel engines
CB 1171.6-1987 Environmental measurement methods for ship equipment oil mist
CB/T 3259-2017 Marine Diesel Engine Crankcase Oil Mist Detector
CB* 3259-1985 Technical Specifications for Crank Case Oil Mist Detector of Marine Diesel Engines

Professional Standard - Agriculture

23药典二部-2020 Part I Part Two Painting Simethicone Aerosol
23药典二部-2015 Part I Part Two Painting Simethicone Aerosol
16药典二部-2010 Part I Part Two Painting Simethicone Aerosol

National Metrological Verification Regulations of the People's Republic of China

JJG(民航) 0086-2006 PSD60-2R Fuel Quantity Test Set

Professional Standard - Education

JY 0358-1999 Miliken oil drop instrument

Professional Standard - Energy

SY/T 5901-2024 Petro-exploration and development instrument classification

U.S. Military Regulations and Norms

ARMY MIL-P-51062 B NOTICE 1-1996 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-P-51062 B-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-P-51062 B (1)-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4
ARMY MIL-C-11136 A-1955 CANDLE, SMOKE, OIL, SGF2, M6; COMPONENTS FOR
ARMY MIL-P-51062 B VALID NOTICE 2-2004 PUMP, FOG OIL, SMOKE GENERATOR, M4 [Use In Lieu Of: ARMY MIL-P-0051062 D CANC NOTICE 2]

Swedish Institute for Standards

SS-EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
SIS 18 41 90-1973 Paints. Salt spray test
SS-EN 299:1998 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
SS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps
SS-EN 225-2:2007 Atomizing oil burners - Oil burner pumps and oil burner motors-Connecting dimensions - Part 2: Oil burner motors
SIS SS-ISO 5062:1979 Atomizing oil burners of the monobloc type — Dimensions for pumps
SS-EN 293:1992 Oil pressure atomizing nozzles - Minimum requirements - Testing
SIS SS 3553-1986 Agriculture - Sprayers - Colour-coding of nozzle tips
SIS SS 18 41 90-1986 Paints and varnishes - Determination of resistance to neutral salt spray
SIS SS-EN 267-1991 Atomizing oil burners of monobloc type — Testing

Austrian Standards

ONORM ENV 299-1992 Oil pressure atomizing nozzles - Angle and spray characteristics
ONORM EN 267-1991 Atomizing oil burners of monobloc type -Testing
ONORM EN 293-1992 Oil pressure atomizing nozzles - Minimum requirements, testing

Czech Standards Institute (UNMZ)

CSN P ENV 299-1994 Oil pressure atomizing nozzles.Angle and spray characteristics
CSN EN 293-1994 Oil pressure atomizing nozzles. Minimum requirements. Testing
CSN EN 267-1994 Atomizing oil burners of monobloc type. Testing

Canadian Standards Association (CSA)

CSA B140.2.1-2010(R2019) Atomizing-type oil burners
CSA B140.2.1-M90-1990(R2005) spray oil burner
CSA B140.2.2-1971(2015) Pressure Atomizing Oil Burner Nozzles
CSA B140.2.1-1973 Mechanical Spray Oil Burners
CAN/CSA-B140.2.1-M90-1990(R2010) Oil Burners; Atomizing-Type
CAN/CSA B140.2.1-M90-1990(R2005) Oil Burners; Atomizing-Type
CSA B140.1 Série-2022 Spray and Vapor Oil Burners
CSA B140.2.2-1971(R2020) Pressure Atomizing Oil Burner Nozzles
CSA B140.2.2-1971 Pressure atomizing oil burner nozzles
CSA B140.2.1-2010 Atomizing-type oil burners (Third Edition)
CSA B140.1 Series-2022 Atomizing- and vapourizing-type oil burners

British Standards Institution (BSI)

BS DD ENV 299:1992 Oil pressure atomizing nozzles. Angle and spray characteristics
BS EN ISO 7253:2001 Paints and varnishes. Determination of resistance to neutral salt spray (fog)
BS EN 299:1999 Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
09/30192027 DC BS EN 299. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
BS DD 61:1979 Flammability spray test for hydraulic fluids
BS ISO 9022-4:1995 Optics and optical instruments - Environmental test methods - Salt mist
BS ISO 9022-4:2002 Optics and optical instruments - Environmental test methods - Salt mist
BS ISO 9022-4:1994 Optics and optical instruments. Environmental test methods-Salt mist
BS EN 267:2010 Automatic forced draught burners for liquid fuels
BS EN 267:1992 Methods of test for atomizing oil burners of the monobloc type
BS EN 293:1992 Specification for oil pressure atomizing nozzles - Minimum requirements - Testing

European Committee for Standardization (CEN)

DD ENV 299-1992 Oil pressure atomizing nozzles; angle and spray characteristics
EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
EN 267:1991 Atomizing oil burners of monobloc type; testing
EN 293:1992 Oil Pressure Atomizing Nozzles - Minimum Requirements - Testing

Military Standards (MIL-STD)

MIL MIL-P-51062B-1969 PUMP, FOG OIL, SMOKE GENERATOR, M4 (SUPERSEDING MIL-P-51062A)
MIL MIL-F-12070C-1984 FOG OIL (S/S BY MIL-F-12070D)
MIL MIL-PRF-12070E-1998 FOG OIL (SUPERSEDING MIL-F-12070D)
MIL MIL-P-0051062D-1987 PUMP, FOG OIL, SMOKE GENERATOR, M4 (SUPERSEDING MIL-P-0051062C) (NO S/S DOCUMENT)
MIL MIL-F-12070D-1992 FOG OIL (SUPERSEDING MIL-F-12070C) (S/S BY MIL-PRF-12070E)
DOD A-A-54877-1993 COMPARATOR, VISCOSITY, OIL

Danish Standards Foundation

DANSK DS/EN ISO 7253:2001 Paints and varnishes - Determination of resistance to neutral salt spray (fog)
DANSK DS/EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
DS/EN 299:2010 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
DS/EN 267:1991 Atomizing oil burners of monobloc type. Testing
DANSK DS/EN 293:1993 Oil pressure atomizing nozzles - Minimum requirements - Testing
DS/EN 293:1993 Oil pressure atomizing nozzles. Minimum requirements. Testing
DS/ENV 299:1994 Oil pressure atomizing nozzels. Angle and spray characteristics
DANSK DS/EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps

Society of Automotive Engineers (SAE)

SAE AMSG952 Guns, Spray, Oil and Solvent
SAE J255_200210 Diesel Engine Smoke Measurement
SAE AMSG952A Guns, Spray, Oil and Solvent
SAE AMSG952B Guns, Spray, Oil and Solvent
SAE J255_197106 Diesel Engine Smoke Measurement
SAE J255_199502 Diesel Engine Smoke Measurement
SAE AMSG952C Guns, Spray, Oil and Solvent
SAE J255A_197808 Diesel Engine Smoke Measurement
SAE AMS-G-952C-2023 Guns, Spray, Oil and Solvent
SAE ARP5921 Evaluation of Coking Propensity of Aviation Lubricants in an Air-Oil Mist Environment using the Vapor Phase Coker
SAE AMS-G-952-1998 Guns@ Spray@ Oil and Solvent
SAE AMSG952-1998 GUNS, SPRAY, OIL AND SOLVENT
SAE J35_197301 Diesel Smoke Measurement Procedure
SAE AMSG952A-1998 Guns, Spray, Oil and Solvent
SAE AMSG952B-2008 Guns, Spray, Oil and Solvent
SAE AMSG952C-2023 Guns, Spray, Oil and Solvent
SAE J35_199503 Diesel Smoke Measurement Procedure
SAE J35_200210 Diesel Smoke Measurement Procedure
SAE J35_198809 Diesel Smoke Measurement Procedure
SAE AS405C-2008 Fuel and Oil Quantity Instruments
SAE AS405B-1958 Fuel and Oil Quantity Instruments
SAE J2715_200703 Gasoline Fuel Injector Spray Measurement and Characterization
SAE J2079-2011 Location of Atomizer of Ether Systems for Diesel Engines
SAE AS405D Fuel and Oil Quantity Instruments
SAE AS405B-1991 FUEL AND OIL QUANTITY INSTRUMENTS
SAE AS405C Fuel and Oil Quantity Instruments
SAE AS405B Fuel and Oil Quantity Instruments
SAE AS405A-1956 FUEL AND OIL QUANTITY INSTRUMENTS
SAE AS405 Fuel and Oil Quantity Instruments
SAE AS405A Fuel and Oil Quantity Instruments
SAE J2079-1992 Location of Atomizer of Ether Systems for Diesel Engines

German Institute for Standardization

DIN EN 299:1998 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
DIN EN 299:1998-11 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
DIN EN 299:2009-11 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; German version EN 299:2009
DIN SPEC 91343:2017 Characterization of paint sprays - Characterization of the droplet size and velocity in (lacquer) paint sprays; Text in German and English
DIN EN 299 E:2009-02 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
DIN EN 299 E:2009 Draft Document - Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; German version prEN 299:2009
DIN EN 23015:1994 Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994
DIN ISO 3308 E:2014-04 Routine analytical cigarette-smoking machine - Definitions and standard conditions
DIN ISO 3308:2000 Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000)
DIN EN 293:1992-06 Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992
DIN EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; English version of DIN EN 299:2009-11
DIN EN 293:1992 Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992
DIN EN 225-1:2007-12 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps; German version EN 225-1:2007
DIN EN ISO 13803:2015-02 Paints and varnishes - Determination of haze on paint films at 20° (ISO 13803:2014); German version EN ISO 13803:2014

Belgian Standards Institute

NBN-ENV 299-1992 Hydraulic spray nozzle. Determination of spray characteristics and angles
NBN-EN 293-1992 Oil pressure atomizing nozzle. Minimum requirements. test

Standards Norway

NS-EN 299:1998 Oil pressure atomizing nozzles — Determination of the angle and spray characteristics
NS-EN 299:2009 Oil pressure atomizing nozzles — Determination of the angle and spray characteristics
NS-EN ISO 7253:2001 Paints and varnishes — Determination of resistance to neutral salt spray (fog) (ISO 7253:1996)
NS-EN 267:1991 Atomizing oil burners of monobloc type — Testing
NS-EN 293:1992 Oil pressure atomizing nozzles — Minimum requirements — Testing
NS-EN 225-1:2007 Atomizing oil burners — Oil burner pumps and oil burner motors — Connecting dimensions — Part 1: Oil burner pumps

United States Navy

NAVY MIL-B-2128 D-1991 BURNERS, STEAM AND OIL PRESSURE, ATOMIZING

Lithuanian Standards Office

LST EN 299-2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
LST EN 293-2001 Oil pressure atomizing nozzles - Minimum requirements - Testing

Spanish Association for Standardization (UNE)

UNE-EN 299:1999 OIL PRESSURE ATOMIZING NOZZLES - DETERMINATION OF THE ANGLE AND SPRAY CHARACTERISTICS.
UNE-EN 299:2010 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
UNE-EN ISO 7253:2002 Paints and varnishes - Determination of resistance to neutral salt spray (fog). (ISO 7253:1996)
UNE 23-507-1989 Fixed system for water spray. Automatic detection equipment
UNE 9293:1993 Oil pressure atomizing nozzles - Minimum requirements - Testing

Yugoslav Association for Standardization

JUS M.F8.012-1990 Burners for liquid fuels MONOBLOK BURNERS WITH FUEL SPRAYING Connection dimensions for pumps

GM Europe

GME B 040 0404-2003 Spray Degreaser (English/German)

Korean Agency for Technology and Standards (KATS)

KS B 7756-1995 DIMENSIONS OF GREASE CUP FOR POWER SPRAYERS
KS B 6222-2007(2017) Low pressure air atomizing oil burners
KS B 6222-2007(2022) Low pressure air atomizing oil burners
KS B 6222-2022 Low pressure air atomizing oil burners
KS M 2091-1995 TESTING METHOD FOR SALT WATER SPRAY OF PRESERVATIVE OIL
KS B 7757-1995 DIMENSIONS OF FUEL TANK CAP FOR POWER MIST & DUST BLOWERS

Polski Komitet Normalizacyjny (PKN)

PN C81523-1988 Paints and varnishes Salt (fog) testing

South African Bureau of Standard

SANS 5568:2003 Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers: Determination of internal pressure of filled dispensers
SANS 5569:2003 Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: Determination of delivery rate
SANS 5571:2007 Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of non-volatile content
SANS 5570:2007 Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of the combustibility (closed drum test)

American Petroleum Institute (API)

API 26-60118-1972 OIL MIST: EVALUATION OF SAMPLING PROCEDURES

General Motors Corporation (GM)

GM 9981421-1978 Grease - Phosphate and Paint Cycle Resistant

GM Daewoo

GMKOREA EDS-T-7932-2011 Salt spray test method for paint coatings

Defense Logistics Agency

DLA A-A-55537-1998 NOZZLE, OIL BURNER, PRESSURE ATOMIZING
DLA A-A-55537 VALID NOTICE 1-2003 NOZZLE, OIL BURNER, PRESSURE ATOMIZING
DLA A-A-55537 VALID NOTICE 2-2012 Nozzle, Oil Burner, Pressure Atomizing
DLA A-A-55537 A-2013 NOZZLE, OIL BURNER, PRESSURE ATOMIZING

Japanese Industrial Standards Committee (JISC)

JIS B 8407:2000 Atomizing oil burner of the monobloc type -- Testing

Bureau of Indian Standards

IS 8118-1976 Smoke emission levels from diesel vehicles

GCC Standardization Organization

GSO 560:2011 Method of testing crude oil and petroleum products – Standard test method for cloud point of petroleum oils

Association of German Mechanical Engineers

VDI 2116-1994 Emissionsminderung - Oelzerstaeubungsbrenner fuer Heizoel EL in Heizungsanlagen

Society of Automotive Engineers of Japan JSAE

JASO M342-1992 Smoke test procedure for evaluating two stroke gasoline engine oils

Ente Nazionale Italiano di Unificazione

UNI EN 267:1993 Atomizing oil burners of monobloc type. Testing.
UNI EN ISO 7253:2002 Paints and varnishes - Determination of resistance to neutral salt spray (fog)
UNI EN 304:2007 Heating boilers - Test code for heating boilers for atomizing oil burners

GB-REG

REG A-A-20351 A-2012 NATURAL BUTTER FLAVOR GRANULES, SPRAY-DRIED

Association Francaise de Normalisation

NF E31-319*NF EN 293:1992 Oil pressure atomizing nozzles. Minimum requirements. Testing.
NF EN 299:2009 Non-return nozzles for spray domestic oil burners - Determination of spray angle and characteristics

Netherlands Institute for Standardization

NEN-EN 293-1993 Oil pressure atomizing nozzles. Minimum requirements. Testing

American Society for Testing and Materials (ASTM)

ASTM D7538-09(2018) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
ASTM D7538-09 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
ASTM D1735-04 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

Others: Haze Moisture Meter,Haze Moisture Meter,UV meter haze,oil mist,oil mist method,Salt spray cycler,For oil mist,oil mist,Oil mist lubrication,fog meter,oil mist generator,Lubricator,Oil mist system,Oil mist test,Oil mist meter,Oil Mist Coefficient,Degreasing mist,Oil Mist Lubricator,Oil mist concentration