Material compactness

Material compactness, Total:136 items.

The international standard classification for "Material compactness" includes: Testing of metals , Filters, seals and contamination of fluids , Other non-ferrous metals and their alloys , Seals , Refractories .

The Chinese standard classification for "Material compactness" includes: Metal physical property test method , Hydraulic and pneumatic device , Rare metals and their alloys , Rubber seal , Unshaped refractory .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13871.6-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 6：Specification of elastomeric materials
GB/T 19396-2012 Terbium—Dysprosium—Iron giant magnetostrictive materials
GB/T 21283.6-2015 Rotary shaft lip-type seals incorporating thermoplastic sealing elements―Part 6:Properties requirements for the thermoplastic and elastic material
GB/T 21874-2008 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
GB/T 3850-2015 Impermeable sintered metal materials and hardmetals—Determination of density
GB/T 19396-2003 Terbium - Dysprosium-iron giant magnetostrictive material
GB/T 3850-1983 Impermeable sintered metal materials and hardmetals; Determination of density

Group Standards of the People's Republic of China

T/CECS 826-2021 Technical specification for the application of airtight materials for buildings
T/CAS 459-2020 Conformance evaluation for wire and cable material —Polyolefin material
T/CSTM 00993-2023 Guidelines for batch consistency evaluation of critical properties of new materials for communication
T/QGCML 329-2022 Quick sealing flexible material in underground coal mine

Professional Standard - Ferrous Metallurgy

YB/T 5083-2014 Dense fireclay and high alumina refractory castable
YB/T 5199-1993 Dense refractory castables―Determination of pyrometric cone equivalent (refractoriness)
YB/T 5083-1997 Dense fireclay and high alumina castable refractories
YB/T 4117-2003 Test method for explosion resistance of dense refractory castables
YB/T 5200-1993 Dense refractory castables—Determination of bulk density and apparent porosity
YB/T 5204-1993 Dense refractory castables - Determination of sieve analysis

Military Standard of the People's Republic of China-General Armament Department

GJB 247-1987 5401 sealing material

Standard Association of Australia （SAA）

AS 4045.1:1993 Prepared unshaped refractory materials - Dense
AS 4045.1:2003(R2013) Prepared amorphous refractory materials - dense
AS 1465:1974 Dense natural aggregates for concrete
AS 681.2:2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

Korean Agency for Technology and Standards (KATS)

KS M ISO 20292-2016(2021) Materials for the production of primary aluminium－Dense refractory bricks－Determination of cryolite resistance
KS M ISO 20292:2016 Materials for the production of primary aluminium－Dense refractory bricks－Determination of cryolite resistance
KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
KS M ISO 20292-2021 Materials for the production of primary aluminium－Dense refractory bricks－Determination of cryolite resistance
KS M ISO 20292:2011 Materials for the production of primary aluminium-Dense refractory bricks-Determination of cryolite resistance
KS M ISO 23711-2007(2017) Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers

KR-KS

KS M ISO 20292-2016 Materials for the production of primary aluminium－Dense refractory bricks－Determination of cryolite resistance
KS L ISO 5017-2013(2023) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity

Danish Standards Foundation

DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
DS/EN 24003:1994 Permeable sintered metal materials-Determination of bubble test pore size
DS/CEN/TS 15418:2006 Methods of test for dense refractory products – Guidelines for testing the corrosion of refractories caused by liquids
DS/EN 61061-3-1:1999 Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheets 1: Sheets produced from beech veneer

TR-TSE

TS 2335-1976 Refractory Materials Classification of Prepared ünshaped Materials (Dense And Insulating)

International Organization for Standardization (ISO)

ISO 1927:1984 Prepared unshaped refractory materials (dense and insulating); Classification
ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
ISO 10080:1990 Refractory products; classification of dense, shaped acid-resisting products
ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
ISO 20292:2009 Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance
ISO 1927:1975 Refractory products — Classification of prepared unshaped refractory materials (dense and insulating)
ISO 18916:2007 Imaging materials - Processed imaging materials - Photographic activity test for enclosure materials
ISO 23711:2003 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

YU-JUS

JUS B.D6.202-1989 Prepared unshaped refractory materials (dense and insulating). Classificatiou
JUS B.D6.101-1988 Refractories. Dense chaped reiractory products. Nomenclature of manufacturing processes

British Standards Institution (BSI)

BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
BS ISO 10059-2:2003 Dense shaped refractory materials. Determination of cold compressive strength - Test with packing
BS ISO 10059-2:2004 Dense shaped refractory materials - Determination of cold compressive strength - Test with packing
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 18916:2007 Imaging materials - Processed imaging materials - Photographic activity test for enclosure materials
BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)

Association Francaise de Normalisation

NF B40-008:1984 Refractories - Classification of dense shaped anti-acid products.
NF B40-379:1982 Refractory products - Prepared unshaped materials control of castables refractories dense and insulating
NF EN 993-3:1997 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 3 : méthodes d'essai pour réfractaires contenant du carbone.
NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.
NF B40-375:1989 Refractory Products - Prepared unshaped materials. Dense and insulating hydraulic concretes - Determination of classification characteristics
NF B40-338*NF EN 993-16:1995 Dense shaped refractory products. Methods of test. Part 16 : determination of resistance to sulphuric acid.
NF EN 993-17:1999 Test methods for dense shaped refractory products - Part 17: determination of the apparent density of granular materials by the vacuum mercury method
NF EN 993-18:2002 Test methods for dense shaped refractory products - Part 18: determination of the apparent density of granular materials by the vacuum water method
F00-003:1987 Railway material in general. Density of materials.
NF C26-177-2*NF EN 61061-3-2:2002 Non-impregnated densified laminated wood for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : rings produced from beech veneer

SCC

08/30176599 DC BS ISO 20292. Materials for the production of primary aluminium. Dense refractory bricks. Determination of cryolite resistance
ASTM STP 1069-01 Building Sealants: Materials, Properties, and Performance
AENOR UNE 53300:1975 Plastic materials. Determination of the tightness of tanks made of reinforced plastic materials.
NS 3054:1974 Method for testing of flooring materials for watertightness
12/30241772 DC BS ISO 11665-9. Measurement of radioactivity in the environment. Air. Radon-222. Method for determining exhalation rate of dense building materials
NS-EN 993-18:2002 Methods of test for dense shaped refractory products — Part 18: Determination of bulk density of granular materials by the water method with vacuum
BS 1902-7.3:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction-Preparation of test pieces from dense castables by vibration (method 1902-703)
BS 1902-3-3.8:1989 Methods of testing refractory materials. General and textural properties-Determination of bulk density, true porosity and apparent porosity of dense shaped products (method 1902-308)
DANSK DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
NS-EN 993-17:1998 Methods of test for dense shaped refractory products — Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
NS 3227:1990 Sealed glazing units - Materials and components - Properties
SN-CEN/TS 15418:2006 Methods of test for dense refractory products — Guidelines for testing the corrosion of refractories caused by liquids
DANSK DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DANSK DS/CEN/TS 15418:2006 Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids
DANSK DS/ISO 8840:2023 Refractory materials – Determination of bulk density of granular materials (grain density)
BS EN ISO 3386-1:1998 Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. Low-density materials

NL-NEN

NEN-ISO 3369:1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369:1975)

RU-GOST R

GOST R 8.830-2013 State system for ensuring the uniformity of measurements. Optical density of photomaterials. Method of measurement
GOST 33785-2016 Sealing materials and gaskets from them. Method for determination of resistance to liquids
GOST R 8.784-2012 State system for ensuring the uniformity of measurements. Measuring installations - standards of 2-nd class of moisture content of firm and loose materials. Verification procedure
GOST 33784-2016 Sealing materials and gaskets from them. Method for determination of compressibility and recoverability
GOST 8.500-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of material optical density
GOST ISO 2478-2013 Dense shaped refractory products. Determination of permanent change in dimensions on heating
GOST R 8.753-2011 State system for ensuring the uniformity of measurements. Reference materials of materials (substance). Basic principles
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units
GOST 8.559-1993 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light
GOST R EN 1928-2009 Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method determination of watertightness
GOST R EN 1109-2009 Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Method determination of watertightness

RO-ASRO

STAS 6200/13-1980 NATURAL STONES FOR BUILDINGS DETERMINATION OF COMPACTNESS,POROSITY AND SATURATION COEFFICIENT
STAS SR ISO 9978:1996 Radiation protectlon - Sealed redioactive sources Leakage test methods
STAS 10406-1975 FLEXIBILE CELLULAR MATERIALS Determination of apparent density

GSO

OS GSO ISO 20292:2013 Materials for the production of primary aluminium -- Dense refractory bricks -- Determination of cryolite resistance
GSO ISO 20292:2013 Materials for the production of primary aluminium -- Dense refractory bricks -- Determination of cryolite resistance
BH GSO ISO 20292:2016 Materials for the production of primary aluminium -- Dense refractory bricks -- Determination of cryolite resistance
GSO ISO 8840:2015 Refractory materials -- Determination of bulk density of granular materials (grain density)
OS GSO ISO 8840:2015 Refractory materials -- Determination of bulk density of granular materials (grain density)

GM Global

GMW 14169-2012 Requirements for Dense Elastomeric Body Seals Issue 4; English

ISUZU - Isuzu Motors Ltd.

ISC-C97-009A-2013 Sealing material - silicone / modified silicone sealer (Japanese/English Version; ISUZU RESTRICTED/CONFIDENTIAL STANDARD

European Committee for Standardization (CEN)

EN ISO 23996:2012 Resilient floor coverings - Determination of density (ISO 23996:2007)
CEN/TS 15418:2006 Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids

IT-UNI

UNI 6349-1968 Rigid honeycomb plastic materials and flexible honeycomb plastic materials. Density determination
UNI 4456-1960 Refractory materials. Determination of temporary linear changes caused by heating

German Institute for Standardization

DIN EN ISO 23996:2012 Resilient floor coverings - Determination of density (ISO 23996:2007); German version EN ISO 23996:2012
DIN 52452-4:1992 Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings
DIN 52452-2:1993 Testing of sealants in building construction; compatibility of sealants; compatibility with chemicals
DIN EN 14241-1:2005 Exhaust systems – Material requirements and tests for elastomeric seals and sealing materials – Part 1: Seals for use in inner pipes
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN 52452-1:1989 Testing of building sealants for compatibility with construction materials

United States Navy

NAVY QPL-22191-31-2011 Barrier Materials, Transparent, Flexible, Heat-Sealable
NAVY QPL-22191-33-2007 BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT SEALABLE
NAVY QPL-22191-QPD-2011 Barrier Materials, Transparent, Flexible, Heat-Sealable
NAVY QPL-81705-16-2006 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC PROTECTIVE HEAT-SEALABLE

IN-BIS

IS 7714-1975 Gasket material sealing test method

GM North America

GM GM9921P-1999 Wash Resistance Test for Sealers - Exposed Application

PL-PKN

PN C89046-1992 Plastics. Determination of apparent density of rigid cellular materials

FI-SFS

SFS 8457-1987 LAIVANRAKENNUS. ERISTYS- JATIIVISTYSAINEET.LUUKKUTIIVISTEET

CZ-CSN

CSN 72 5151-1977 C'ompu?t and semi-compaet ceramic tiles. Quality, shapes and dimensions
CSN 02 9010-1986 Sealing. Seal housing diameters

Spanish Association for Standardization (UNE)

UNE 53336:1981 PLASTICS. SPECIFICATIONS AND TEST METHODS FOR FLEXIBLE COMPACT VINYL COATING WITH CLOTH BACKING
UNE 104-233-1990 Impermeable. Waterproof asphalt and modified asphalt materials. Asphalt material for sealing concrete

American Society for Testing and Materials (ASTM)

ASTM C509-84 Standard Specification for Cellular Elastomeric Preformed Gasket And Sealing Material
ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM C1446-11 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-24 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM C1446-19 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM F37-06 Standard Test Methods for Sealability of Gasket Materials

South African Bureau of Standard

SANS 9048:1987 Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus
SANS 23711:2008 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

Japanese Industrial Standards Committee (JISC)

JIS B 2410:2005 O-rings -- Suitability of elastomeric materials for industrial applications
JIS K 6380:1999 Rubber packing material

IPC - Association Connecting Electronics Industries

IPC TM-650 2.3.5A-1975 Density Insulation Material

TIA - Telecommunications Industry Association

TIA/EIA-102.AAAC-2001 Conformance Test for the Project 25 DES Encryption Protocol