Thermoelectricity

Thermoelectricity, Total:200 items.

The international standard classification for "Thermoelectricity" includes: Insulating materials in general , Thermoplastic materials , Plastics and rubber insulating materials .

The Chinese standard classification for "Thermoelectricity" includes: Electrical insulating material and its products , Basic standards and general methods for synthetic resin and plastic , Temperature and pressure instrument .

Professional Standard - Chemical Industry

HG/T 5113-2016 Thermoplastic elastomer-TPS Compound for wire and cable uses

Group Standards of the People's Republic of China

T/CEC 396-2020 Heat storage material for electric heat storage equipment

未注明发布机构

FORD WD 954-2009 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2003 MATERIAL AND PERFORMANCE REQUIREMENTS FOR SCREWS USED IN THERMOPLASTIC MATERIALS

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
GB/T 20875.2-2010 Electrical insulating materials—Methods of test for the hydrolytic stability—Part 2:Moulded thermosets
GB/T 29313-2012 Test method for thermal transmission properties of electrical insulation materials
GB/T 11026.7-2014 Electrical Insulating Materials - Thermal Endurance Properties - Part 7: Determination of Relative Thermal Endurance Index (RTE) of Insulating Material
GB 7668-1987 Sheathed thermocouple materials

Military Standard of the People's Republic of China-General Armament Department

GJB 2605-1996 Specification for heat-sealable flexible antistatic barrier materials
GJB 2605A-2021 Specification for heat-sealable flexible antistatic barrier materials

Gosstandart of Russia

GOST 22663-1977 Thermoelectrode materials for low-temperature thermocouples. Method of homogeneity test
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST 28096-1989 Slot insulation materials. Method for accelerated determination of thermal endurance

Spanish Association for Standardization (UNE)

UNE 53031:1974 PLASTICS MATERIALS. DETERMINATION OF SUPERFICIAL RESISTANCE OF THERMOSETTING PLASTICS MATERIALS
AENOR UNE 53032:1974 Plastic materials. Determination of the resistance and transverse resistivity of thermoset plastic materials.
UNE-EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties -- Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (Endorsed by AENOR in December of 2005.)
AENOR UNE 53027:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT RESISTANCE
UNE-EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2006) (Endorsed by AENOR in September of 2006.)
UNE-EN 61234-2:1998 ELECTRICAL INSULATING MATERIALS. METHODS OF TEST FOR THE HYDROLYTIC STABILITY. PART 2: MOULDED THERMOSETS. (Endorsed by AENOR in July of 1998.)
UNE-EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties -- Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (Endorsed by AENOR in September of 2008.)
AENOR UNE 53031:1974 Plastic materials. Determination of the surface electrical resistance of thermostable plastic materials.
UNE-EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN IEC 60216-6:2023 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method (Endorsed by Asociación Española de Normalización in Februar...

German Institute for Standardization

DIN EN 60216-2:2006-04*VDE 0304-22:2006-04 Electrical insulating materials - Thermal endurance properties
DIN EN 60216-4-2:2001-04*VDE 0304-24-2:2001-04 Electrical insulating materials - Thermal endurance properties
DIN EN IEC 60216-6:2024-01*VDE 0304-26:2024-01 Electrical insulating materials – Thermal endurance properties
DIN EN 60216-8:2014-01*VDE 0304-8:2014-01 Electrical insulating materials – Thermal endurance properties
DIN EN 60216-4-1:2006-12*VDE 0304-4-1:2006-12 Electrical insulating materials - Thermal endurance properties
DIN IEC/TS 60216-7-1:2015-11*VDE V 0304-7-1:2015-11 Electrical insulation materials – Thermal endurance properties
DIN EN IEC 60216-5:2024-01*VDE 0304-25:2024-01 Electrical insulating materials – Thermal endurance properties
DIN EN IEC 60216-3:2022-03*VDE 0304-23:2022-03 Electrical insulating materials – Thermal endurance properties
DIN EN 60216-4-3:2001-04*VDE 0304-24-3:2001-04 Electrical insulating materials - Thermal endurance properties
DIN EN 60216-1:2014-01*VDE 0304-21:2014-01 Electrical insulating materials – Thermal endurance properties
DIN EN 60216-5:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2008); German version EN 60216-5:2008
DIN EN 1871 E:2018-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN 60216-3:2007 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2006); German version EN 60216-3:2006
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN EN 1871 E:2008-09 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

GM Holden Ltd

HOLDEN HN 1003-2001 Plastic Moulding Material Electrical - High Heat Resistance
HOLDEN HN 0035-2012 Heat Resistance of Trim Materials
HOLDEN HN 0035-1986 Heat Resistance of Trim Materials

Czech Standards Institute (UNMZ)

CSN 34 6501-1985 Tests of thermal endurance of electrical insulating materials
CSN 34 6501 Cast.9-1989 Thermal endurance of combined flexible materials for electrical insulation
CSN 34 6410-1961 Tost for evaluating the thermal endurance of electrical insulating materials
CSN 34 6501 Cast.5-1989 Thermal endurance tests of electroinsulating materials. Thermal endurance of enamelled winding wires
CSN 33 0250-1988 Electrotechnical instructions. Thermal classification of electrical insulation
CSN 34 6501 Cast.7-1986 Thermal endurance of thermosetting moulding and embedding materials

Associação Brasileira de Normas Técnicas

ABNT P-PB-130-1970 Electrical insulation materials. Heat resistance classification

Japanese Industrial Standards Committee (JISC)

JIS C 2254:2011 Rigid mica materials for electric heating equipment
JIS C 2254:2004 Rigid mica materials for electric heating equipment
JIS C 2254:1992 Rigid mica materials for electric heating equipment
JIS C 2143-3:2013 Electrical insulating materials -- Properties of thermal endurance -- Part 3: Instructions for calculating thermal endurance characteristics

British Standards Institution (BSI)

BS EN 60216-2:2005 Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
BS EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Instructions for calculating thermal endurance characteristics
BS EN 60216-4-2:2001 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Precision ovens for use up to 300 C
BS EN 60216-4-3:2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens
BS EN 61234-2:1998 Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-3:2002 Electrical insulating materials - Thermal endurance properties - Instructions for calculating thermal endurance characteristics
BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
BS 3262-2:1960 Road marking materials. Hot applied thermoplastic materials (inset type)
BS EN IEC 60216-3:2021 Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
BS 3262-1:1960 Road marking materials. Hot-applied thermoplastic materials (superimposed type)
BS 2782-1 Methods 131C and 131D:1978 Methods of testing plastics - Thermal properties - Crushing strength after heating (heat resistance) of thermosetting moulding material - Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings
BS 7878-7:1997 Materials used in communication cables-Halogen free flame retardant thermoplastic sheathing compounds
BS 5691-5:1995 Guide for the determination of thermal endurance properties of electrical insulating materials-Guidelines for the application of thermal endurance characteristics
BS EN IEC 60216-5:2022 Electrical insulating materials. Thermal endurance properties. Determination of relative temperature index (RTI) of an insulating material
18/30382609 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Physical properties
BS EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
BS 5691-2:1979 Guide for the determination of thermal endurance properties of electrical insulating materials-List of materials and available tests
BS PD CEN/TR 14613:2003 Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
BS EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Ageing ovens - Single-chamber ovens
BS 3262-3:1989 Hot-applied thermoplastic road marking materials - Specification for application of material to road surfaces

Association Francaise de Normalisation

NF C26-302*NF EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2 : determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
NF EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2: determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
NF EN 61234-2:1998 Electrical insulating materials - Test methods for hydrolytic stability - Part 2: molded thermosetting materials
NF P98-603*NF EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
NF C26-305*NF EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material
NF C26-305:2003 Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.
NF C26-303*NF EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics
NF C26-303:2002 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics.
NF EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for the calculation of thermal endurance characteristics
NF P75-306:1987 Manufactured building thermal insulation - Conventional determination of the water permeability character at 24 hours of rigid insulation
NF C26-303*NF EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics
FD CEN/TR 14613:2006 Thermal performance of building materials and components - Principles for determining the thermal properties of wet materials and components

International Electrotechnical Commission (IEC)

IEC 60216-2:1974 Guide for the determination of thermal endurance properties of ekectrical insulating materials - Part 2: List of materials and available tests Guide for the determination of thermal endurance properties of electrical insulating materials.
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
IEC 60216-3:2002 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-3/COR1:2002 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60216-3:2021 RLV Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 61234-2:1997 Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets
IEC 60216-2:2005/COR1:2024 Corrigendum 1 - Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

American National Standards Institute （ANSI)

ANSI/ASTM D2304:2010 TEST METHOD FOR THERMAL ENDURANCE OF RIGID ELECTRICAL INSULATING MATERIALS

GCC Standardization Organization

GSO IEC 60216-2:2010 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
GSO IEC 60216-3:2014 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
GSO IEC 61234-2:2014 Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets

United States Navy

NAVY QPL-81705-QPD-2010 Barrier Materials, Flexible, Electrostatic Protective, Heat- Sealable
NAVY QPL-81705-2013 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
NAVY QPL-81705-13 (2)-2011 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
NAVY QPL-81705-16-2006 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC PROTECTIVE HEAT-SEALABLE
NAVY QPL-81705-QPD-2011 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
NAVY MIL-PRF-81705 E-2009 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE, HEAT-SEALABLE
NAVY MIL-PRF-81705 D (1)-2004 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC PROTECTIVE, HEAT-SEALABLE
NAVY QPL-81705-2012 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
NAVY QPL-24179-26-2010 ADHESIVE, FLEXIBLE UNICELLULAR-PLASTIC THERMAL INSULATION
NAVY QPL-24179-2010 ADHESIVE, FLEXIBLE UNICELLULAR-PLASTIC THERMAL INSULATION

American Society for Testing and Materials (ASTM)

ASTM E2584-20 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM D5470-06 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D5470-06(2011) Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D5470-12 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM STP 1629-2021 Performance, properties and flexibility: thermal insulation materials
ASTM STP 162-1955 Performance, properties and flexibility: thermal insulation materials
ASTM D2304-18 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM D2304-23 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

Comitato Elettrotecnico Italiano

CEI 60216-5:2003 Electric Insulating Materials - Thermal Endurance Properties - Part 5: Determination of the relative thermal endurance index (RTE) of an insulating material
CEI EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
CEI EN 60216-5:2012 Electrical insulating materials - Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
CEI EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
CEI EN IEC 60216-3:2022 Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics

Military Standards (MIL-STD)

MIL-PRF-81705E-2010/NOTICE 1-2014 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
MIL MIL-PRF-81705E-2009 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable

Korean Agency for Technology and Standards (KATS)

KS C IEC 60216-2-2023 Electrical insulating materials－Thermal endurance properties－Part 2：Determination of thermal endurance properties of electrical insulating materials－Choice of test criteria
KS L ISO 8497-2021 Thermal insulation－Determination of steady-state thermaltransmission properties of thermal insulation for circular pipes
KS C 2007-2019 Testing methods for resistance of thermosetting plastic insulating materials
KS C IEC 60216-2-2008(2018) Electrical insulating materials － Thermal endurance properties － Part 2: Determination of thermal endurance properties of electrical insulating materials － Choice of test criteria
KS C IEC 60216-3-2:2002 Guide for the determination of thermal endurance properties of electrical insulating materials － Part 3: Instructions for the calculating thermal endurance characteristics － Section 2: Calcuations for incomplete data: proof test results up to and includin
KS C IEC 60216-2-2008(2023) Electrical insulating materials － Thermal endurance properties － Part 2: Determination of thermal endurance properties of electrical insulating materials － Choice of test criteria
KS C 2361-1980 RIGID MICA MATERIALS FOR ELECTRIC HEATING EQUIPMENT
KS C IEC 60216-5:2014 Electrical insulating materials — Thermal endurance properties — Part 5: Determination of relative thermal endurance index(RTE) of an insulating material
KS C IEC 60216-3-2017(2022) Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS C IEC 60216-5-2019 Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C IEC 60216-3-2024 Electrical insulating materials — Thermal endurance properties — Part 3: Instructions for calculating thermal endurance characteristics
KS C IEC 60216-3-2022 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS C 2361-1998 RIGID MICA MATERIALS FOR ELECTRIC HEATING EQUIPMENT
KS C IEC 60216-3-2017 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS C 2007-2014(2019) Testing methods for resistance of thermosetting plastic insulating materials
KS L 9016-2022 Test methods for thermal transmission properties of thermal insulations
KS C IEC 60216-3:2017 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS C 2007-2014(2024) Testing methods for resistance of thermosetting plastic insulating materials

National Standardisation Body (ASRO)

STAS 10289-1982 Solid electroinsulating materials THERMOSETTING LAMINATED MATERIALS Test methods
STAS 10106-1985 Solid electrical insulating materials THERMOSETTING LAMINATED BARS
STAS 6127-1968 plastic. Determination of tear resistance of thermoplastic materials

International Federation of Trucks and Engines

NAVISTAR CEMS DT-11-2001 Heat Stability of Thermoplastic Trim Materials

Swedish Institute for Standards

SIS SS IEC 216:1983 Guide for the determination of thermal endurance properties of electrical insulating materials
SIS SEN 24 14 10-1960 Power cable, crushing experiment of thermoplastic materials
SS-EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
SS-EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity
SS-EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60216-2:2010 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
OS GSO IEC 60216-3:2014 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
OS GSO IEC 61234-2:2014 Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets

Danish Standards Foundation

DS/EN 60216-2:2006 Electrical insulating materials – Thermal endurance properties – Part 2: Determination of thermal endurance properties of electrical insulating materials – Choice of test criteria
DANSK DS/EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
DANSK DS/EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets
DS/EN IEC 60216-3:2021 Electrical insulating materials – Thermal endurance properties – Part 3: Instructions for calculating thermal endurance characteristics
DANSK DS/EN IEC 60216-3:2021 Electrical insulating materials – Thermal endurance properties – Part 3: Instructions for calculating thermal endurance characteristics
DS/EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
DANSK DS/EN 60216-5:2008 Electrical insulating materials – Thermal endurance properties – Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
DS/EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets
DS/EN 60216-3:2007 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
DANSK DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties

Standard Association of Australia （SAA）

AS 2464.1:1981 Methods of testing thermal insulation - Corrosiveness of thermal insulation

Asociación Española de Normalización (AENOR)

AENOR UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

GM Europe

GME STD 518836-1998 Thermoplastic elastomer 8836 TPU Termoelast 8836 TPU English/Swedish

Bureau of Indian Standards

IS 8504-2-2013 Electrical Insulating Materials - Thermal Endurance Properties Part 2 Determination of Thermal Endurance Properties of Electrical Insulating Materials - Choice of Test Criteria
IS 8504-6-2012 Electrical Insulating Materials —— Thermal Endurance Properties Part 6 Determination Of Relative Thermal Endurance Index (rte) Of An Insulating Material
IS 8504-4-2013 Electrical Insulating Materials —— Thermal Endurance Properties Part 4 Instructions for Calculating Thermal Endurance Characteristics

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.41-1986 Coefficient of Linear Thermal Expansion of Electrical Insulating Materials

Cuban Institute of Standards and Metrology

NC 15-74-1987 Thermotechnics. Material Thermal Conductivity Values

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7808:2000 Plastics - Thermosetting moulding materials - Determination of transfer flow
UNI EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
UNI EN ISO 295:2000 Plastics - Compression moulding of test specimens of thermosetting materials
UNI 4290:1959 Tests on thermosetting plastics. Determination of resistance to tracking.

German Welding Society

DVS 2211:1979 Filler Material Thermoplastic VES 2211

European Committee for Electrotechnical Standardization（CENELEC）

EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics
EN 60216-3:2002 Electrical Insulating Materials - Thermal Endurance Properties Part 3: Instructions for Calculating Thermal Endurance Characteristics
EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

Society of Automotive Engineers (SAE)

SAE J1361-2020 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials
SAE J1361-1987 HOT PLATE METHOD FOR EVALUATING HEAT RESISTANCE AND THERMAL INSULATION PROPERTIES OF MATERIALS
SAE J1361-1994 HOT PLATE METHOD FOR EVALUATING HEAT RESISTANCE AND THERMAL INSULATION PROPERTIES OF MATERIALS
SAE J1361-1981 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials

Standards Norway

NS-EN 1871:2020 Road marking materials — Paint, thermoplastic and cold plastic materials — Physical properties

Lithuanian Standards Office

LST EN 60216-2-2005 Electrical insulating materials. Thermal endurance properties. Part 2: Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria (IEC 60216-2:2005)
LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0304-23-1985*DIN VDE 0304-23:1985 Thermal properties of electrical insulating materials; Endurance properties; Statistical methods
VDE 0304-23-2002*DIN EN 60216-3:2002 Thermal stability characteristics of electrical insulating materials - Part 3: Guide for calculation of thermal stability characteristics

Finnish Standards Institute

SFS-EN 1871:2020 Road marking materials. Paint, thermoplastic and cold plastic materials. Physical properties

European Committee for Standardization (CEN)

PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
EN 60216-5:2003 Electrical insulating materials — Thermal endurance properties — Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

Aerospace Industries Association

AIA NAS279 Tubing Fabricated from Thermoplastic Materials, Specification for

Austrian Standards

OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

Türk Standardları Enstitüsü

TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —